Best scx24 SWB comp rig

Рет қаралды 841

2 ай бұрын

This is a build I purchased and really like this chassis. I said in the video it’s a XL but it’s the SWB build. Very capable rig, will need a few changes and some tuning done before the next mini comp. Don’t forget to Like, Comment and Subscribe. I try to post 3 videos a week!
#scx24 #rccar #offroad #axial #cheap #new #trending #traxxas #redcat #3d #furitek #moforc #athos #flubrc

Пікірлер: 16

@gibsonlife573 Ай бұрын

Just a little tip on the receivers also brother it's the other way around you're supposed to hold the volume button on the receiver power it on then I'll find out the remote and turn it on it's what they say if it works it works you know you can't argue with

@RCHobbyFarm Ай бұрын

I am just going off how I got it to Bind for me. I held the bind button on the receiver and plugged the ESC to power, then held the bind button on my Flysky GT5 remote and turned the power on and it linked up right away. I am not saying this is the right way or only way just the way I was able to bind this micro rx.

@gibsonlife573 Ай бұрын

I got a recommendation for you do you see how high your motor sitting and how it's kicked up in the very back if you get the mail for the micro Komodo the little red one especially if you're using the stock pinion the 11th tooth being it is small enough to fit I would use that and then take a little nut or a spacer unbolt the transmission put it underneath the front of the transmission and run your screw back through it having that night under the front of the transmission will lift it up a little bit and level your motor up I was running mine to the rear now I have turned my motor around to the front but it takes some work I'm not going to lie especially with the motor I run I always run the bam 4100 by mofo tiny trucks ESC also I know you got one that is escaped with man Josh's stuff is really amazing also and 36 mm hot racing oil shocks the big bars are so fire also with Josh's ESC you can adjust your bece with that Wi-Fi Linker and I don't know if I would run that much cash. That's an awful lot man I mean I like to have some in there don't get me wrong but I don't want that Servo kick way down in the back I got a channel also it's called Gibson life I think you the symbol at Gibson live 573 in the shift RC Servo is my absolute favorite

@RCHobbyFarm Ай бұрын

I do agree it is a little high. I will say I am very happy with the performance on this rig, but I do have a new build I am Almost finished with that will probably replace this one.

@gibsonlife573 Ай бұрын

I don't know if I said it or not but I was talking about the hot racing oil shots the 36 big boys I run up front and then I run a 39 to about 45 in the rear

@RCHobbyFarm Ай бұрын

Yes, I have heard people running comp setups like this, shorter in the front and longer in the rear.

@blackwaterrc 2 ай бұрын

Amazing video, what’s that dementor doing in the background

@RCHobbyFarm 2 ай бұрын

It is one that I purchased used in a bundle of 5 RC cars and someone on the Hardpark RC page was looking to trade a Cheatcode XL with links for a Dementor chassis. I do have a video from last week of a Dementor SS on X15 build. Will have a new video tomorrow on some updates to the Dementor also.

@blackwaterrc 2 ай бұрын

Sweet

@Rc_Alex_76 2 ай бұрын

Cool build does the receiver bind to the flysky gt3c

@RCHobbyFarm 2 ай бұрын

www.amazon.com/Receiver-Output-Flysky-Transmitter-Controller/dp/B0B8N6GH2J/ref=mp_s_a_1_2?crid=1VUMJNJDS7U9Q&dib=eyJ2IjoiMSJ9.OTrjjEfY3Z2zQta0ciE0QpzhMzYlDhaoD6n9XDXHsQ2cIdO1mojKRT5Ki1TdYSx4mijbFaFplXjYArpAu-i_6_YHsRii_FP8D25OTkRIymopS63P9rZCFs3OUHUwt990uvOE2umiaLDF-ap7rColvBsHPCQNuxH9oBCParlkqn-eL-0qwTGB-mVrfT3Lo-ir5dkdx3KDZ82xDpYW3t8Y7g._ofne6kjYK4JnpoE4X119sUH01JMxz3jYFw0Rs6XXnM&dib_tag=se&keywords=micro+receiver&qid=1712931891&sprefix=micro+reciever%2Caps%2C548&sr=8-2 Here is the exact same receiver. I would assume it would but not 100%.

@Rc_Alex_76 2 ай бұрын

@RCHobbyFarm thanks alot for the link appreciated 🙏

@Rc_Alex_76 2 ай бұрын

@RCHobbyFarm done some research and it is same protocol so it will bind thanks for the info

@gibsonlife573 Ай бұрын

If you got this kid that come with the chassis it is not Delran it's 3D printed but he does offer Delran now they're just out of stock

@gibsonlife573 Ай бұрын

And I like the cedar motor don't get me wrong but I'm telling you right now I've tested every motor on the market besides mofros new pancake motor and none of them can even come close when it comes to torque to the bam 4100

@RCHobbyFarm Ай бұрын

I have ran All of Mofo RC motors and I really like the Bam and Nanobam v2. I run mostly Mofo RC motors in my builds and the Nanobam is my favorite. I have the 4100 Bam in my Cheatcode V2 build and it’s very smooth with my Dinky D-drive esc. I do like the Cedar also and it’s pretty smooth connected to a Dinky esc.