Thanks for including the red and green markers in the comparison! Very helpful!
@Billetworkz2 жыл бұрын
Glad you are happy with it! Thanks again for your support!
@KevinVo2 жыл бұрын
Keep up the quality parts!!!
@carlostuason5113 Жыл бұрын
Found your channel recently but that red and green marker made the comparison so easy to follow. Love it!
@artblackwood79362 жыл бұрын
Put the Billetworkz short shifter and a weighted shift knob on my 2022 brz. A home run.
@Billetworkz2 жыл бұрын
We appreciate your support!
@KevinVo2 жыл бұрын
It's such a solid combination!
@jamesvang43922 жыл бұрын
Yup been needing one of these!!! Thanks for the video!
@KevinVo2 жыл бұрын
Thanks for watching!!
@seanlundin-weston24792 жыл бұрын
I have a short teardrop in my ‘22 BRZ and it has been amazing. I can’t wait to get a short throw shifter
@PerformanceComputing Жыл бұрын
Just ordered one! Can't wait to get it in my 86!
@beems98302 жыл бұрын
hype when you upload
@KevinVo2 жыл бұрын
Appreciate the love!!!
@StockySnail2 жыл бұрын
If anyone has an aluminum drive shaft, this shifter may sit too low so make sure to check. I tried the TRD short shifter years ago and it was barely interfering with the drive shaft so had to pull it back out and return it.
@michaeljohn11602 жыл бұрын
Yes short shifters do interfere with aluminum drive shaft.
@KevinVo2 жыл бұрын
Thanks for the heads up!
@DoctaMarcos Жыл бұрын
aw shoot i just ordered one, but i have a carbon driveshaft. theres no way to adjust it some how? Now i'm curious if the billetworkz will be better
@StockySnail Жыл бұрын
@@DoctaMarcos Carbon drive shafts aren't as large around (less diameter), so you'll probably be ok.
@DoctaMarcos Жыл бұрын
@@StockySnail i appreciate your reply!! any idea how the trd shifter is compared to billetworkz?
@nathanielfoo962 жыл бұрын
WTF WAS THAT OPENING KEVIN LMAO LOVE IT
@KevinVo2 жыл бұрын
Glad you liked it! Thanks for watching!!!
@WANTEDFZ Жыл бұрын
see now im tempted to buy it even though im gonna by my brz in 5 months give or take
@Gooffau2 жыл бұрын
I want a tall short shifter like the cae but affordable.
@KevinVo2 жыл бұрын
Only other one I can think of is IRP
@ag845748 ай бұрын
I notice sometimes that my shifter feels like it doesn't want to go into gear or that I need to force it, I do have a upgraded clutch and didn't notice it with a stock shifter
@PBrooksSawyer Жыл бұрын
Am i wrong in seeing that the only thing keeping the base together is a clip? In the case of my 23' a dlimsy c clip?
@VEA-un9hx Жыл бұрын
Nice vid! Hey Kevin, any rattling or weird noise?
@KevinVo Жыл бұрын
The car is too loud to hear anything else besides the exhaust so I could tell you haha I don't believe so though.
@rotsenpuriran778 Жыл бұрын
Does the rear shifter bushing needs to be replace also if I put on a short shifter? Thanks
@brianb23762 жыл бұрын
Hey Kevin, for the OE look, any comparison to the Torque Solutions short shifter or reason for going with Billetworks?
@KevinVo2 жыл бұрын
Torque solutions tend to just copy other companies designs. Billetworkz makes very high quality products and they're great to work with.
@saegerjaster32712 жыл бұрын
Laughs in IRP master race. 😂
@KevinVo2 жыл бұрын
CAE master race!
@josee.zn62 жыл бұрын
YESS
@slowfrs2 жыл бұрын
Do you like this over the IRP short shifter?
@KevinVo2 жыл бұрын
It's more of a preference thing. I wanted to keep it OE+ and I enjoy having a shift knob so I went this route. I may try something different later on, we'll see.
@gil73082 жыл бұрын
why not the irp one ?
@KevinVo2 жыл бұрын
Wanted to stick with an OE style shifter for now.
@Kevaughan2 жыл бұрын
Hey I'm curious as to why you went with this instead of the IRP short shifter
@KevinVo2 жыл бұрын
Wanted to opt for a more OE+ look as opposed to the giant IRP or CAE for know. We'll see if that changes down the road.
@zeroproblems28892 жыл бұрын
What made you choose this over IRP?
@KevinVo2 жыл бұрын
Wanted to opt for a more OE+ look as opposed to the giant IRP or CAE for know. We'll see if that changes down the road.
@NooGai8082 жыл бұрын
I had the KartBoy short throw shifter, then upgraded to IRP and I absolutely love it.
@saulespino25102 жыл бұрын
In your opinion is the STI short shifter comparable to this Billerworkz short shifter?
@KevinVo2 жыл бұрын
No, the STI short shifter barely shortens the throws. This is makes much more of a difference.
@ricardocardenas41502 жыл бұрын
yo quick question do u really need a new dustboot if urs is ripped im asking cuz i ripped mine as well it still covers it just has a rip on one side
@KevinVo2 жыл бұрын
It helps to keep that joint clean. If you just have a little rip it shouldn't be a big deal.
@supergt862 жыл бұрын
Hey Kevin are you experiencing any rattle from 4.5k rpm to redline. I recently installed mine with the exact setup (fusion shift knob and short shifter) as yours, but mine rattles. Just curious is all, currently talking with Austin rn to sort out the issue. '13 FRS
@beems98302 жыл бұрын
is it rubbing against your reverse lockout plate
@supergt862 жыл бұрын
@@beems9830 Unfortunately no, otherwise it would rattle only on 1st and 2nd gear. Currently it rattles throughout all 6 gears when it is at a high rev range. Me and Austin from Billetworkz narrowed it down to the reverse lockout (lower portion with the 1 bolt). Currently waiting to try out a different part for it. I will leave an update and solution so if anyone else has the same problem they can find it here. Probably will help save Austin and you viewers some time with troubleshooting similar issues.
@KevinVo2 жыл бұрын
I haven't noticed anything, but I don't think I would be able to notice it in the FRS either way haha it's too loud in there.
@supergt862 жыл бұрын
@@KevinVo oh right your car is spec built race car now haha have fun
@damanjeetgill43292 жыл бұрын
@@supergt86 Any update. Having this issue too!
@gryphon1234562 жыл бұрын
There’s a review on their website that says it rattles allot and is noisy. Has that been your experience? It’s actually the only review sadly. Lol.
@Billetworkz2 жыл бұрын
That review was just written less than 12 hours ago and we are currently working with the customer regarding his issue. At the moment, it seems there was an assembly issue, and once we get the issue resolved with the customer, he is very willing to update his review. Feel free to check out the reviews on the other short shifter listings, not just that specific color, as well! Let us know if you have any questions and we’d be glad to help!
@gryphon1234562 жыл бұрын
@@Billetworkz awesome. Thank you for responding. The other question I had in mind, and maybe a naive on my part as I’ve never installed a short shifter before, has the unit been tested allot to ensure that the gears are fully engaged with each shift? Any chance of wearing gears? Transmissions I hear are expensive ☺️. Thanks again. ✌🏻
@Billetworkz2 жыл бұрын
@@gryphon123456 there is nothing that changes inside the transmission, so the gears will still be fully engaged. The shifter is just a tool to shift from gear to gear!
@KevinVo2 жыл бұрын
If you couldn't already tell, Billetworkz takes care of their customers no matter what!!!
@damanjeetgill43292 жыл бұрын
@@Billetworkz Hi Im having this same issue to! Bought it a couple weeks ago, thought i can bear it but its too much. Was hoping yall can help out! ORDER #1451333
@acatliveshere2 жыл бұрын
Does it rattle?
@KevinVo2 жыл бұрын
Haven't noticed anything so far.
@EdLo.2 жыл бұрын
First
@Darkslide2AR-FE2 жыл бұрын
What? Never seen a man play with his shifter? lmfao!!!!!!