I have mostly a hodge podge of rogue bumpers, some fringe, and a few iron plates from various places. I can honestly say I don’t really care , I use all of them, even the change plates - for some reason I really like the feel/look of the Rogue HGs. I will say the crumb bumpers, I just didn’t purchase any of those because of the reasons you described and tend to crack over time, especially in a garage. I’d avoid those totally. Mil spec echos, just fine, fringe savage, great looking, regular echos, fine. I will say if you do movements like deficit rows or Landmine work often I find smaller iron plates to be pretty useful; otherwise sturdy bumpers have been perfect. In my experience Rogue hits it out of the park with service, durability, and design almost every time - but it’s important and useful to remember that there are plenty of other choices out there as well. (Rep, for example, has really improved recently). If you care about buying USA made, that’s another consideration as well and it can get difficult there, but worth looking into imo.

I only have Rogue plates. I use their HG2.0 bumper plates most of the times and have their calibrated Lb plates for special lifts lol…

Those must be some special lifts

I¨m starting to lean towards encased cast iron in rubber with holes for holding them for my home gym. seems like the best out of all worlds, price included. but yeah got 4 different types of plates now at home and i need to try to sell the rest to keep it uniform

Hahha that's some people's arguments against them. I think they're good stuff and have their places in many gyms

Someday I hope to be so big I can ignore everyone like a true star! 😂

@@GlucksGym until then your my go to guy on gym equipment.

I'm going to rewatch this one because it's an earlier video and I can't even remember what I said! Thank you for the support!

Thanks! Love your videos as well. It only took me 3 months to respond! YT killing me on these notifications

@@GlucksGym It seems like if you are in YT studio on the phone that the notifications are different than on the desktop version.

That sounds right. I just wish it were more consistent between.

Those deep dish are so nice and my current favorites. Their quality tends to make them more expensive but probably worth it in the long run. Can't go wrong with the bumpers either way and I use bumpers and the deep dish so a solid investment anyway.

Can't argue there, I'm a sucker for that kind of stuff.

They're definitely great for noise reduction and can help with wear and tear on equipment

Hard to find at the moment unfortunately but I bet a lot of your stuff was made better then too.

Haha to be fair this is like one of my first 10 vids. Thanks!

Where are you buying from, in UK too?

@@alistairhomewood7344 Start by checking whats in stock at blk box, bulldog gear, primal strength, mirafit, wolverson, again faster. With the national lockdown things are constantly selling out and restocking

@@danieljay2307 ok thank you! To be honest I'm quite tempted by the rogue bumpers, and OL bar as they're actually decently priced (I have to buy women's because room just isn't wide enough for 7ft). Only problem will be shipping

@@alistairhomewood7344 Theres a rogue europe site, check that out. Shipping may not be too unreasonable. I've never ordered from Rogue but added some kettlebells to my shopping basket recently to look at the shipping costs and it wasn't outrageous I remember that much.

@@danieljay2307 ok thank you! Unfortunately nothings in stock, but I have spent a lot of time with cheap plates, and bar, I think I've earned the right to buy some better equipment 😂I also need some bumpers because my desdlift isn't like 200kg, I want to warm up with some weights below 1 plate, ideally

Thank you!

This is an older one! Hope you like the newer stuff too

I'm not even a bumper fan and I have to admit they're really nice

This one's pretty old. Check out the place now, it's a lot different. We'll be updating this video soon 😁

Good to know this older video is still doing its part. Thanks!

Yeah it's a hard time but companies are producing more so they gotta catch up sometime!?

I'm glad you were able to find something!

Thank you! It means a lot to me to hear that and I appreciate it. Glad to see my personality coming out isn't scaring people off.

@@GlucksGym I literally had a few laughs from every video I watched so far. Your personality is a fresh breath of air compared to the other boring monotonous home gym reviewers. Keep up the great work. I’m a new fan.

Wooo I've grown more powerful!

@@GlucksGym Power Level above 9000🤣🏆

I echo a lot of those same ideas in my dumbbells video. Mine are second hand from a gym closing (and I bought them for my friends) but I prefer my deep dish and my 45 bumpers.

You can use lots of companies to fill in. I prefer black so they match and milled is nice too. I do have some yorks but the new ones finish and quality isn't close to that Rogue deep dish quality.

Thanks! I appreciate it.

And they seem to be ramping up their production because they're coming in stock more and more often. They are gorgeous and I'll probably pick more up in the future.

You'll love it here

I've been eyeing those plates ever since I got those deep dish but the shipping was insane. They've expanded their shipping warehouses since then and I need more plates so you never know 😂

Haha awesome' I am qlso confused by the guys who are saying the deep dish take up too much space on the bar but yet are not lifting anything close to 675 .. and with a good power thrrr ie minimum whip" the only complaint I have is how dam loud they ring during dead lifts. Anyways really enjoy the channel buddy you and Winnie have q good thing going . Looking forward to more reviews

Was literally just talking to someone about getting more plates even though I'm not gonna put up 800lbs... I work out with a few people and need multiple setups going sometimes so that's my justification. Hell people have a dozen bars why can't we have more plates?!

@@GlucksGym ah yeah. That makes sense. Unfortunately I work out alone but you may have convinced me to get new plates. I’m itching to get the Rogue 12-sided urethane coated plates but thankfully the full set isn’t in stock so not much fir me to do right now!

@@jamestonbellajo the only issue with those is since they're not round you can't deadlift with them. They bounce and roll into your shins the shape. You could look at the 6 shooters if what you're looking for is urethane and holes for handles /chains

@@GlucksGym ah thanks! I was thinking about those as well. I should be more practical hahaha.

You have a home gym, there is no practical! Just depends what you want there's a million options

Sorry you heard it here first... I didn't want it to be like this

@@GlucksGym At least someone finally told me.

Thank you!

I really like them but they are a bit loud but definitely an upgrade in quality.

I’m only planning to use them for bench and squats and I have bumpers for deadlifts.

Thank you! You know I really should just wear a jacket instead...

Hex are the most fun during deadlift! Ugh

I have a 500 lb plus set of Marcy grips. I also have a set of 45 lb rounds to boost them and love the setup. Makes easy plate changes.

For the price you might as well get rogue. Titan price is per plate.

Both great options but you might wanna check out my deep dish unboxing before you decide.

I wish I could man but if I did that what would be the point of arm day?

They're cast iron plates coated in rubber, 3% tolerance, and imo a little pricey for what they are (but aren't all rubber coated plates?). Some people complain about the smell but generally people like them. The 45s are smaller than regulation size which to some is an issue. I've seen them in person but don't have a ton of experience. Rep can be amazing (their benches) but their quality control can be a little lacking at times.

Why switch (genuine question)?

@@GlucksGym would be less money now. But I’m happy with what I have.

Now that's an entirely different level!

@@GlucksGym have you checked them out? You know its a good company when brian shaw is paying for shipping from the uk!

@@getstrongby4038 I've seen them because I watch some of their stuff but that's as close as I've gotten

All you can eat from a 12 inch plate

@@jonathanstubbsguitar5340 a man of culture

Not at all as long as they weigh what they say. The only issue is if they're way off spec which I've seen but even must cheap ones are fairly close

@@GlucksGym thanks man

You're welcome. Good luck!

Mine like the smooth feel of the machined plates. I really don't care IF they actually weigh around the right amount, don't slide all over, and have a good finish so they're not rusting all over the place.

I can't speak on their prices because it seems like they're listed a little oddly atm (the titan 45 is showing as less than it's 10lb) but that's two different styles of hubs which is the real change. The rep black bumper is a metal insert (with hooks, so it's basically all rubber) whereas the titan elite is a steel center that's surrounded by rubber. It's not really an apples to apples comparison, you're comparing a basic style bumper to a competition style though calling that Titan bumper competition level isn't accurate, it's not. If this were rogue vs rogue for example that's a big difference because of the hubs. As for my experiences with those two companies. I'd rank Rep above Titan but I've been pretty happy with both and at the same time both can have quality control issues. I suppose it comes down to what are your plans and how much do you want to spend. Cheap bumpers (unless they're crap) can last a looong time, high end bumpers will probably outlive us.

You're not comparing the same type. Titan Elite Black bumper plates are for olympic lifting as their center metal ring is very thick. They're much more durable than normal bumper plates. You need to compare Titan economy bumper with REP black bumper. I believe overall Titan is cheaper as its price includes shipping fees.

You'll have to let me know how the Olys are.

Can't cover the guns! I actually just got a unit installed so no worries on the next one

I love my old York milled I just wish I could find more. I haven't noticed them doing anything to my bar. I'll have to take a closer look next time I clean my barbells. Thanks!

@@GlucksGym Lubricate your bar sleeves with a film of 3in1 oil and your plates will “glide” along the sleeve and thus not scratch. My old York made in USA milled plates are 30 years old and they are in kilos, they are my favorites, too. Lift hard, there is NO tomorrow!

@@keysersoze5920 yeah I keep up on maintenance so no issue there... Ok well mostly

​@@keysersoze5920won't this make it less grip for the collars ?

@@markmurray5659 Nope. Collars just glide, too.

The rubber line? I suppose it depends on the price but I like that style (I have their commercial line) because I put my chains through the handles. I wouldn't pursue them as my primary plates but it depends on what you have and your plans.

@@GlucksGym Yes, the rubber line. I have them from 2.5-25 so I could switch it up and go for bumpers in the same brand or another to have the correct spec for my 45 lb plates. I just don't want to be stuck with 45 lb plates that don't work with anything else if you know what I mean.

100% know and suggest you get 45s that are standard size. I have the same issue with my rubber plates.

@@GlucksGym That seals the deal. Thanks so much for the insight. Keep up the great content.

No they'll be the same weight either way. Urethane in generally are pretty high end plates so they're normally pretty accurate but then again so are high end iron plates.

which plates specifically?

@@GlucksGym I'm looking at the LUXIAJUN Competition Plates, i haven't seen any reviews on this Plates. What do u think about this Plates?

I love the Rogue deep dish (there are other good American options) but those Rogue's are awesome. Depends what you want. They're a little loud but imo really high quality. If money wasn't an option I might look at other options as well but you can't go wrong with them. Though you'll have to get change plates from someone else to finish off the set.

I'll be honest Tom that was a long time ago and I can't remember the weight tolerances but I do remember the finishes being different between them and just not loving the plates overall. That being said they worked and worked well and I only remember having cosmetic issues but like I said, it was long ago and I can't really remember exactly.

Wait until you see the next one from half on, things get funny once someone joins me to help

Older Iron Gripz were rubber (the ones I own) I haven't tried their new urethane when they were brand new so I can't speak to those now but typically urethane should have little to no smell

Competition bumpers are manufactured to tighter specs which costs a lot more money. So the collar opening on the competition bumpers has to be within .1 of a mm in diameter and the weight tolerances have to be within 15grams vs urethane where it's 1%. So at 45lbs the competition bumpers will be 45lbs +/- 15 grams but the urethane is +/- 200 grams.

With a plate that's encased in urethane you can't drop it and treat it like a bumper because it's just a thin coating. It's really just a plate with urethane around it to protect it. A urethane bumper is a true bumper and functions like one. Drop it, throw it around, etc but they're going to be much thicker than a plate.

Can I deadlift with urethane plate ? Or should I go for bumper ? thanks

You can deadlift with them just fine they're very durable

Thanks! I don't really yet besides my personal stuff. I guess if this takes off I'll have to cover all the bases.

My Iron Grip are rubber hence the wear, feel, and marks they leave. They're also pretty old so you're not looking at these when you're purchasing them. They now make a urethane version but I would never pay those prices new.

Those are the best types but very expensive and don't hold up that well

Hahah you're right! Whatever we can get

Good luck finding ones which are not inflated. Once gyms reopen it will be interesting what happens with the cost when the market is flooded with second hand.

Yeah and to see what happens with with these companies. Eventually it's home gym people will have a lot to pick from.

They did recently increase prices but I believe it was the first time in a few years. You're right they're (and most companies) foreign made but they have some good stuff. Specifically their benches (I have the FB 5000 and ab 5000) are incredible. I'm pretty picky with my equipment so my stuff is from all over but I always but quality where I can.

Rep had turned into a shit company with shit products

You're right, it's a tough time but companies have upped their production. Rogue posts new stocl daily. Keep searching and hopefully you get what you're looking for.