I got mine from wheel spacer store. Definitely makes a big difference in improving the stance.
@alexanderovercash315 Жыл бұрын
I like the aggressive look the spacers provide. Well done video!
@accelerated_motion Жыл бұрын
Thanks! 👍
@thoopra Жыл бұрын
Beautiful spec! Doing spacers on my Supra soon
@accelerated_motion Жыл бұрын
Right on!
@mperdomo4647 Жыл бұрын
Best Wheels Spacers in the Market!!.... but expensive.. you get what you pay for. Doing this to my G82 soon. 15f / 12r
@accelerated_motion Жыл бұрын
Absolutely get what you pay for! And I think 15f / 12r would be perfect, especially if you lower the car!
@ashleyschnetzer7628 Жыл бұрын
Sweet car
@accelerated_motion Жыл бұрын
Thanks!
@bkny679820 сағат бұрын
I'm a little late to the party here but I just ordered a 2025 BMW M4 competition and don't plan on lowering it. What spacer sizes would you use to just give it that OEM + look? I don't want any rubbing on the fender liner. Thank you
@accelerated_motion16 сағат бұрын
Without lowering the car, I would go 15mm all around. I think it gives it a nice thick stance. You could also do 15mm front and 13mm rear if you want a tad bit more clearance in the back but I think 15mm all around works well.
@j_d8624 Жыл бұрын
I just did 15mm front and 13mm rear but i want to change to 18mm front and 15mm rear i think it’ll look more aggressive in my opinion.
@accelerated_motion Жыл бұрын
You may experience some rubbing in reverse at full lock.
@Sham_ra3403 ай бұрын
My m3 comp is stock I wanted to order the 15mm for front and back but I wanted to make sure it doesn’t rub. Not planning to lower it. Would I be in the clear?
@accelerated_motion3 ай бұрын
I ran 15mm on front AND back when my car was on stock ride height - no rubbing issues.
@matthewmenjivar66608 ай бұрын
Do you think 12mm in the rear and 15mm in the front is good if I don’t want to lower the car but want a more OEM aggressive look?
@accelerated_motion8 ай бұрын
Anything is better than nothing in terms of looks. If you dont plan to lower the car, I think 15mm all around is great. 12mm in rear would be good too.
@kern417 Жыл бұрын
now big turbo port injection and tune :D
@accelerated_motion Жыл бұрын
Hahaha trying to take this build a little slower! We will see how that goes!
@tray07 Жыл бұрын
Did you get any tpm malfunctions?
@accelerated_motion Жыл бұрын
Nope! None at all
@MartyNguyen6117 ай бұрын
pretty sure the torque spec is 140NM not 105
@accelerated_motion7 ай бұрын
For the lug bolts?
@gtrmadman4127 Жыл бұрын
Did the front rub???
@accelerated_motion Жыл бұрын
Nope - the rear did a tiny bit after lowering.
@gtrmadman4127 Жыл бұрын
@@accelerated_motion I seen others saying the 12mm front touches the inner arch front ever so slightly , they had to heatgun the front and use a wedge to make a few mm clearance
@accelerated_motion Жыл бұрын
@@gtrmadman4127 I did notice that in reverse when my wheel is turned almost full lock, the front does rub a tiny tiny bit. But it isnt enough for me to do anything about it, since it does not happen that often where I am in reverse at full lock.
@stevep47356 ай бұрын
That could have been 10 min.
@accelerated_motion6 ай бұрын
Thanks for the feedback.
@briggsliceaga9257 Жыл бұрын
Beautiful! 😊😊😊😊!! Get to the top FAST - P r o m o s m!