I would recommend covering adding sounds for the switches (Angle Mode / Acro Mode) or (Rate Profile 1). it makes the switches fool proof and also warns you if you pull it out of a bag and a switch is off and you don't realize it, on power on it tells you everything.
@divingfalconfpv46025 ай бұрын
Yea I add sound tracks for a lot of switches
@gigoyiyo3 ай бұрын
Just I came with the first fly in 4.5, for me angle mode now is just perfect!🎉🎉🎉😅
@JEFF-P-V5 ай бұрын
Dude, hell yeah, JB. THIS is the content I miss! Great video!
@chrisB_OG4 ай бұрын
Yeah 😊
@chrisB_OG4 ай бұрын
Damn this is an excellent video! So good at explaining and breaking things down for us! Thank you Joshua!
@pertificatus54205 ай бұрын
thanks for the vid i always love your contenet
@bongpov4765 ай бұрын
You can also check out the angle feedforward set at 150 or 200,because it's default is 50...type in cli set angle_feedforward = 200...then the angle mode rates will be responsive
@vadimus20075 ай бұрын
Linear curve is a line, right? :)
@trev.productions5 ай бұрын
😂😂😂
@SanneBerkhuizen5 ай бұрын
Right
@LarsEchterhoff5 ай бұрын
Squircle = A square circle.
@bestbattle5 ай бұрын
Lines to not exist. They are arches of circles with the radius to infinity
@KidCe.4 ай бұрын
in mathematicall graphs a straight line also counts as a curve.
@ChaddRainsFPV5 ай бұрын
Great intro to adjustments tab^. I won't be doing a custom rate profile for angle; I bet there will be an option to revert back 'previous angle rate' or something like that in the CLI at some point. But I can already think of a million things Adjustments could be used for now 🤙
@stst83015 ай бұрын
I find the Stock Betaflight 4.5 Angle mode,Fantastic!
@DocKandTBW9 күн бұрын
I'm going to give it a try on something and stick with it to see. But I see JBs point after a first flight on one, it feels weird!
@ProjectMockingbird4 ай бұрын
Hmm, unless something has changed, I think yaw does use an actual rate, so putting zero wouldn’t be a good idea. Granted, I haven’t played with 4.5 to confirm any of these “improvements”. Rate switching has always been one of the things I’ve recommended in the PMB setup, and now it looks like it’s almost mandatory. Thanks for continuing to provide great content, Joshua!
@abertheham5 ай бұрын
Pretty sure Emu got it from NFE silverware. Might not be for everyone if they’re not used to it, but lots of people love(d) it-myself included. Excited to try it out.
@infinityphotorob3 ай бұрын
This might explain what I am feeling with my GEPRC Cinebot 25 running 4.5 and my Pavo20 running 4.4. The Cinebot with similar rate profiles drove like it was on ice in angle mode. It took HUGE stick deflections to get it to respond. Where the Pavo running 4.4 I need the tiniest of tiny movements and the rates are almost tuned as low as they will go. I feel the Cinebot I have a range of useful adjustment. My rates are so much higher that the pavo. I am still getting sorted but at least I feel I can make it too slow or too fast changing rates.
@mntlfpv5 ай бұрын
Do a quicksilver tutorial! Lots of whoop racers use it, super simple to setup, and its less buggy than the latest BF variants, angle mode rocks in Quicksilver and with no airmode you can bounce off gates better.
@MCsCreations5 ай бұрын
Thanks for the tutorial, Joshua! 😊 Stay safe there with your family! 🖖😊
@PIDtoolbox5 ай бұрын
Far as I know, there is some Angle expo hard coded in BF4.5
@CopeFPV5 ай бұрын
Not sure why but Angle mode in my case Betaflight 4.5 was so bad on my F411 2.5 inch whoop that I had to fhash back after second fight , but same version on Mamba 405 freestyle 5 inch was working just fine.
@TechnicallyTom5 ай бұрын
I don’t know what they were thinking. The ideal expo curve for acro mode will never be that same as for angle mode. I already have a selection of rates for different situations. I would have to settle on just one rate to use this work around. Would prefer an option to just turn off their behavior or just have one expo curve for angle separate from the other rates.
@professorbiohazard42715 ай бұрын
guessing this is a rant due to trying to do racegow in angle mode. i had the same issue and went straight back to 4.4
@Cinoo905 ай бұрын
How to Fix gps 0 sats... All connected betaflight shown me that flight controller is talking to gps module
@itsgoofy31894 ай бұрын
Ineed help I just got the jumper t light v2 and I need help flashing it I open the configurator and set the release as 3.3.2 device category should be jumper 2.4GHz and the device should have 2400 tx but the only options are stuff that says 2.4GHz please I need help I might quit I don't want to I want to fly whoops
@ghostrot4 ай бұрын
I got no angle mode option for some reason
@randallwatts98405 ай бұрын
Do you have a vid on setting up turtle mode? Thanks
Ok Joshua, but what if I want my 3 different rate profiles (low/med/high) in ACRO ? With your solution I would have to give that up. Or do you see any way to have switchable rates in ACRO, and then still go linear in ANGLE ??? THAT would be the real solution...
@JoshuaBardwell5 ай бұрын
Yes I do think you could do that, it would just take a little more tweaking with custom programming in the radio to make the aux channel move as requested. But either way, you're only getting three rate profiles.
@TheAtariJoe5 ай бұрын
@@JoshuaBardwell Meh... that would require pretty complicated EdgeTX programming. Def not easy to handle for most. I think the BF devs overstepped here, they need to implement a dedicated rate box for ANGLE mode - or at least enable a CLI command to disable rates on ANGLE. Sidenote: I just noticed it´s showing Rateprofile 1-4 in the Rateprofile dropdown ??? How about while in ACRO on switch A you can have rateprofiles 1-3 on switch B as usual, but when switch A goes to ANGLE, ignore switch B and set "rateprofile 4" by default, which would then be a profile just for ANGLE mode. Maybe you could try that in a video ?
@TheAtariJoe5 ай бұрын
@@JoshuaBardwell BF used to have CLI command "set rate_6pos_switch", but that isn´t supported anymore. Permanently only rateprofiles 1-4 available. But how do I friggin program to select "rateprofile 4" ??? Channel setting 1000-2000us only does profile 1-3. Can someone enlighten me ? ;)
@zdkama2 ай бұрын
Holy shit "not sure I appreciate this change" is such an understatement. Angle mode is fucking trash now. No idea how to just make it feel like it used to.
@divingfalconfpv46025 ай бұрын
How would Angle and acro not be on same.. turning off angle makes it acro
@JoshuaBardwell5 ай бұрын
Fair.
@vcdroneGR5 ай бұрын
Since it is my very first time I want to use Betaflight on my windows pc and connect my geprc cinelog 25 flight controller for configuration which betaflight version do you recommend to download? Between 4.3.0 and 4.4.0? Or the latest 4.5.0 is better?
@JoshuaBardwell5 ай бұрын
Personally I'm using 4.5 RC2 but it does have a couple small bugs that you might care about it.
@vcdroneGR5 ай бұрын
@@JoshuaBardwell I understand. In case I want to use previous versions 4.4 or 4.3 I suppose I can find them available on the Betaflight website right?
@JoshuaBardwell5 ай бұрын
You can flash 4.4 and 4.3 from the configurator.
@vcdroneGR5 ай бұрын
@@JoshuaBardwell Alright you probably mean 10.9 latest configurator version correct?
@JoshuaBardwell5 ай бұрын
Yes.
@divingfalconfpv46025 ай бұрын
So angle strentgh doesnt do anything anymore?
@JoshuaBardwell5 ай бұрын
Angle strength still does exactly what it always did. The Angle PID loop uses angle strength as a P gain for tracking the commanded angle. The only thing that 4.5 changed is that the relation between commanded angle and stick deflection is not linear any more.
@vertigo28935 ай бұрын
@@JoshuaBardwell angle_feedforward is also new and makes a massive difference. In previous betaflights, you hade to set P gain, which would be too low for snappy response (full left to right would take like a second!) or too high and cause oscillations. Or usually both at once, oscillations and still slow. Now its snappy and crisp like in acro mode.
@runpuppyfpv57445 ай бұрын
The aio blheli32 passthrough is broken also
@BrandonBeans5 ай бұрын
What?! I've been testing for a while and no issues across many aios while flashing and configuring bluejay
@runpuppyfpv57445 ай бұрын
@@BrandonBeansmaybe it's just blheli 32 then because I had to flash back to 4.4 change settings then flash back itsblunty is the one who told me
@BrandonBeans5 ай бұрын
@@runpuppyfpv5744 that appears fixed in master as of 2 weeks ago. Go flash 4.5 Zulu (not rc2) to get this. Pull number 13364
@tomkoller7495 ай бұрын
I ONLY fly in acro mode. I just think angles are out of place😅
@big-smoke-rc5 ай бұрын
I'd say angle mode is improved, not broken. But that's not as clicky a title
@onlyfansmarco5 ай бұрын
It is like you spent 20 years driving a gas ⛽️ car and you try a Tesla with a different pedal and steering system and you just don’t particularly like it. Then the tipping point is the blinkers get stuck and don’t disengage after you make a turn or lane change. So you don’t buy one. #betaflight
@MrStevegibb5 ай бұрын
What a pain in the ass why would you assume that someone would want there acro rate curve to apply to angle mode. Its a big problem for me and will mean I wont bother with at32 flight controllers and stick to Betaflight 4.4 I love Betaflight but sometimes there are decisions like this that really are bone headed tbh.
@wfdroneservices36905 ай бұрын
Who uses angle mode? 🤔
@rebel_is_here5 ай бұрын
Whoop pilots, beginners, and me - on a quick switch, so I can: (1) When my video dies I can switch to angle, pull my goggles up and fly back LOS. I'm not very good with acro LOS, especially when the drone is a way off. (2) When I crash into a tree branch, spin and lose what orientation I'm in, it can get me back to level and then if I'm still in the air, I return to acro.