I LITERALLY just bought this 2 days ago and was already mentally preparing myself to go down the rabbit hole of research to get it working. Thank you!

Thank you for your support 💙💛

Thanks for the cap from 🇺🇦

Great hat🇺🇦 Thank you✌️

The correct ELRS target is BETAFPV 2.4GHz AIO RX, I have the Meteor65 Pro and it works with that target (it says on Betafpv's website). I recommend you to put the decorative parts on the canopy, because I scratched my camera lens without them. With them on you can't feel the weight difference, but you can't scratch the camera lens anymore. Just make sure when you put them to press on them until it clicks. If you have the M03 V1.1 VTX, you have 400mw of output power (it says on the VTX page at the specs section that the V1.1 does 400mw), not 350mw, as the drone spec page says.

I do like your cap 🙏

Nice cap)

Дякую Вам за чудові відео❤

nice hat!

Been a few years since ive flown fpv and man, it looks way more simple to setup a quad now!

Joshua, thank you so much for your support 🇺🇦

I like your hat, thanks Joshua

I love the timing of this Video, I am getting my Metor 75 pro tomorrow and was about to look for a setup video So this is perfect, Thank you Joshua :)

Thanks for your review and support!

this is crazy timing, I just bought this exact drone this past week!

Thanks so much for this. My very first quad, a Meteor75 pro, is being delivered later this afternoon. I cant wait, but have been a little nervous about how hard it might be to bind it to my Boxer. This video put me at ease a little bit. You rule, Mr Bardwell.

You are awesome! I literally just bought this last night and came to KZfaq looking for videos and Shernoff two days ago. You posted a fresh one. Thank you.

. Love watching your videos Saturday I used a pack. Pulled it out checked the battery and was 3.5v per cell so all good. Battery wasn’t hot. Sat it down ran upstairs to get something to eat and my mother in law was screaming fire. Ran down and was like wtf. Got her out ran upstairs and got kids and wife out. Ran inside got the animals out. Ran back inside turned heat off turned attic fan on ran downstairs and started to put fire out. Was so Smokey from ceiling to floor. Ran into a door half opened and got a concussion. Continued to fight the fire and saved the house. Was in the icu burn unit on breathing tube and induced coma for 4 days. I’m out now but sucks losing all my hobby stuff and couple rooms in my house. Flying is my stress reliever and could deff use that now. Been stressful last week but family is safe and I’m in recovery

Hello from Ukraine and thank you for support ;)

I'm getting ready to race one tomorrow! This frame but hummingbird AIO

Great videos and cap, thank you!🟡🔵

Thanks Josh. I’m actually planning to get this 65 pro very soon.

Nice hat! Slava Ukraini! 💙💛

I'm glad there are some people like you )

the meteor65 pro and the cetus x are my first 2 drones! I thought I knew what I needed to know by now but I learned something new today! Thanks!

I just bought earlier today as a first analog quad to see how different it is to my HDZERO Mob6 for RaceGOW so it's perfect timing

Thank you for your support 🇺🇦❤️ And for useful vids!

Now I'll have a cool tutorial, for my meteor, thanks JoshUA!

Cool cap, Respect!

Just amazing video, thank you from Latvia

Your cap is awesome! Slava Ukraini! ✌

Next stream UA?)

I think I learned something…I think I learned I have jumped ahead and need to get back to the basics first.

I like your hat

Perfect timing i just got this quad! Thank you so much!

Thanks for the tutorial, Joshua! 😊 Stay safe there with your family! 🖖😊

Esoteric lol very good one Joshua I’ll be honest with you. I did have to look it up. Anyways, I love you buddy and as always thank you for all the hard work you put into the hobby. I really mean that. You help a lot of folks get up and going and not just that. But flying with Confidence. 🙏👍👍🙏 Mikey

Great cap

Oh my god, I'm seeng this video for the 3rd time and only now I see your cap with UA! Greetings from Kyiv, Ukraine! Love you man!

Thanks for video, thanks for support 🇺🇦

It would be helpful to scroll through the setting screens your presets are applying so we can create your presets.

Oooh the Timing. I needed this 4 Werkstatt ago when I startet with fpv. 😂

Cool hat 🇺🇦🇺🇦

Timely video! I got my Meteor75 1S a couple weeks ago. I actually did end up upgrading its FW because in 4.4 you get the HD OSD, which is honestly way better. I ordered the Walksnail version and just got the OSD working the way I want. I know I lost the PID settings.... working that out. We need some good presets for the Meteor series for 4.4/4.5.... I'm running the most recent release preview because, why not, if I was going to upgrade anyway. Fully upgraded my Avatar X goggles, ELRS module, old Taranis x9D+ to EdgeTX, Walksnail camera/VTX, ELRS receiver... now all I need is nice weather.

Josh, the bind button under the receiver tab will bind elrs just like you could with frsky

Cool baseball cap man. Glory to Ukraine!

I factory reset my Meteor 65 Pro and it lost all settings... 2:25 I was importing my backup txt file in CLI which wasn't working, this made me realise I do it from Presets... D'oh. Works like a charm again.

Can you make a tutorial on how to lower the camera angle on the Meteor65 Pro? I did your simulator tutorials, now bought this drone, but the angle is just too high to use it indoor. I have to go too fast to use it and I crash to quickly.

BETAFPV 2.4GHz AIO RX - is the target I use for my BetaFPV Meteor65 Pro receiver.

JB great vid. I have the 65 Pro 2022 with Crossfire and I would appreciate your recommendation as to what presets to use I wanted to flash BF 4.5 RC2? Cheers

My camera image is constantly overexposed. Anything I can do to fix this?

Hi. I bought betafpv 75pro. I decided to turn on the pit mode. But when I save, this option just turns off by itself. Why it's happening?

hat ❤❤❤

Cool cap 🇺🇦. Everyone who like this cap google smth about social drones / victory drones / wild hornets 🇺🇦

i don't know what i did, but my drone will no longer go into wifi mode after turning on and i don't know how to fix it

I have this meteor 65 pro elrs when I go to the express LRS configurator put in the target and device it does not allow me to build only to flash super confused. I just want to fly.😂 any help plus tried to go down the DIY 2400 route like you’re showing but that doesn’t even show up in my configurator so I tried to follow step-by-step, but none of the target or devices look the same as the video

Great videos here and also thanks for your support. Learning to fly an fpv with tour videos. In case i get drafted. Have to protect my country

Glad I am a Patron!!

I've just bricked my Meteor65 pro with wrong elrs firmware. Don't you know if there's any way to access it's elrs in bootloader mode?

Hey there, does someone know where to solder a reciever when purchasing the PNP version?

Hey dude, discovered your channel about a week ago. I purchased the M65 and the M75 after discovering your channel. my question to you is how can you guarantee that everybody has set up the track identical as well as raised at exactly the specifications? The FPV community is amazing so I’m just curious.

This arrived Monday 😂😂

Joshua, put that thing on Quicksilver!

Joshua BardWell pls helpp me:(( I might have the meteor 75 pro totally the same with your 65. I am using the Beta Literadio 3 elrs WITHOUT a bind button, so can I use the binding phrase instead and how can I update the firmware to 3.x elrs on the TX. Pls help me, thks

That own "partial" presets are handy!

Hi Joshua. This has been my pick (meteor65 ) in my newbie career. I've gone through 2 of them. Motors and have the meteor75 coming lol.. all through not knowing things.. but learning.. and a lot with your help. I really do appreciate what you are doing here. My question is. .. I think you Minsion something about the v t x on this. my Meteor65 when plugged in. a start up beep and nothing at all. After. And the one I fly flew in a water puddle. Tried drying it good. And put Alcohol on it.. Thinking maybe it would help clean the dirt off and help Evaporate what moisture.. ( Just a thought or idea lol ) well when turned on... lines and fuzzy all through the screen. So I figured the first Quad was a burnt f c somehow. So I soldered its vtx on the one I fly.. and when turned on. Start up beeps than nothing.. so it wasn't the fc..but the vtx. Oh the fun in learning. So my real question is.. what would be a good vtx for the meteor65 pros Fc ? Not sure what would be a good fit.. if there was a better option. I just am not sure.

Tks JB d'or this tuto ! Also thank you for all your advice and sharing 👍 You don't use Esc Bluejay Firmware for this Tinywoop ?

Where I can buy this hat

btw headup rates seem pretty slow for a whoop racing.

My 75 pro kicks the antenna away from the props instead of breaking the vtx connector.

Looking at the spec, seems heavy for a 65mm. My home built 65mm using the BetaFPV meteor frame and FC (0702 motors, though, not 0802) is about 18.5-19g w/o battery. Be interested to know how reliable it is. I have had a few of those serial ELRS cross shaped BetaFPV FCs - assuming its the same board, and have had several failures. Typically these were due to loss of OSD and/or USB connection, sometimes all power also, or in one case the gyro failed - or the link to it did. BetaFPV support were very helpful though, and replaced parts promptly, but it made my worry about the board design.

I generally agree that SPI is inferior to serial in almost all cases. However right now at this particular moment. with 3x ELRS firmly established and supported in Betaflight, SPI is actually easier to bind assuming you are using 3.x on your radio, and if you arent, why not? but you just need to put your bind phrase into the receiver tab in betaflight and power it up. DONE. even a Ciotti could do it. (JK love ya Gangle boy)

Why beta fpv over happymodel for exemple?

Ty, for the attention to the whoops. Go bardwell.

Can you use this drone with the Betafpv Aquila 16 RC and headset?

My time was 13mins 27sec. I broke the drone had to fix it mid race

I was looking at building my own betafpv meteor 65 pro cause i wanted higher kV and 0702 motors maybe 🤔

I had the Meteor65 pro since 1-1-24 in still have been able to fly. BETAFPV LiteRadio 3 RC Radio Transmitter will not connect at all. In sad part I have no computer😅

Ineed help I just got the jumper t light v2 and I need help flashing it I open the configurator and set the release as 3.3.2 device category should be jumper 2.4GHz and the device should have 2400 tx but the only options are stuff that says 2.4GHz please I need help I might quit I don't want to I want to fly whoops

Help! I have the same whoop (FRSKY) with version 4.2.11. I updated it to 4.3, but now it fails after 3 meters. I could have known this if I had seen the little info on the Betafpv site warning about this. If I flash back to 4.2.11, I no longer have a gyro. I have no idea. Means I need a 4.3 version for the Meteor 65 Pro that works. But there is none. And the strange thing is that the .hex files etc. on the BetaFPV site says 3.0 blablabla. The text on my fc says 3.1. Help! 😫

Hey, My analog FPV setup has decent range, but sometimes the video in my googles starts to randomly drift to the right and gets black/white sometimes. After a few seconds my Skyzone Sky04X beep once and the video signal is perfectly finde again. This happens super randomly, completley independent on how far the drone is away from me... Also don´t think its a overheating issue... Any tips on what to do? I need the video signal to be reliable, since i´ll use it for a fpv-job!

you did this with it plugged in the entire time? my VTX is getting hot it has me worried lol

Hello, does anyone here know about putting a Runcam Thumb Pro on a Mobula7? There seems to be not enough sources out there for me to make the decision of actually getting it. My concerns are: -Weight, and how it will affect the quad -Flight time, obviously reduced, but how much -How much will it affect the freestyle-ness? -How to safely mount it -Battery size (350mAh is 7.8g while 450mAh is 16g) -Should i make the Thumb pro naked?

I've got Jumper T20 with 3.3.0 elrs. There is no "Other devices" menu item.

im here and lucky to be only the 14 th comment

All Ukraine is now studing fpv ( for known reason). Thanks to Joshua for the support.

The ego behind "you're gonna learn something today" is crazy. While it's true regarding my dumb ass, that statement is absurd

I have the Meteor 75 Pro for almost a year now and I can say that these little toys are just insanely well built. Crashed it 60 times for sure, the frame has some scratches but it holds as it's nothing, but I can't find the VTX option :(

Just use the new mobula 6.

Change the prop rotation on that drone or you'll rip the vtx antenna connector off the board when the props grab that antenna and yanks it towards the front of the quad. Stupid oversight by betafpv.

Dont waste your Money in BetaFPV !

WHY IS THIS SO COMPLICATED

First lol

second lol

Mr. Bardwell you're definitely THE highest IQ in the YT FPV community, bar none 🫵✅

I want same cap! 🇺🇦

Thank you for the cap, Joshua 🫡❤ And for the knowledge, of course 🧐

nice hat!