To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/BevelishCreations . The first 200 of you will get 20% off Brilliant’s annual premium subscription.
@chrisose6 ай бұрын
I've had a Spacemouse since I shifted my primary design work into Inventor. I can't imagine working 3d without it.
@jasonjordan95985 ай бұрын
Great addition of showing video of how you actually use the mouse versus just showing the cool zooms within CAD.
@dwaynevarnell9157 Жыл бұрын
Used one since the first one was produce and had many since. Can’t live without it working in the cad world.
@BevelishCreations Жыл бұрын
Glad to hear!
@greggjohnson621 Жыл бұрын
Indeed. I tend to avoid software that doesn’t support 3Dconnexion devices.
@greggjohnson621 Жыл бұрын
I’ve been a 3Dconnexion user for about 20 years. I’ve had five of them over the years. The Enterprise is my favorite but the two button single knob format is also good. Most importantly, I have to say that pulling the knob up or pushing down should make the model space go up and down. Pushing away should make the model space push away. That’s one of the two default choices they give you and it’s so intuitive, because it feels like the knob is actually the model space. As if you’re holding the object with your left hand. The way you move the knob, is the way you move the object. It would not be good to get used to the other setup that you show at the beginning of the video, then decide later that you want to switch to the more natural and intuitive setup.
@BevelishCreations Жыл бұрын
I know that’s the default way of using it, but I’ve been using one of these for 15 years and have always had it setup this way. I doubt I’ll ever go back to the other way 😆
@greggjohnson621 Жыл бұрын
@@BevelishCreationsif that’s what works for you that’s totally cool of course. 👍 When I advise new users, I always tell them to set it so the workspace moves the same way that the knob moves.
@lifeholdstrategic3 ай бұрын
I bought the Spacemouse based on this video for Shapr3D,,, it’s been a game changer! I’m also using two Stream Decks. I made icons in Keynote to make selecting tools quick.
@BevelishCreations3 ай бұрын
Awesome
@sphaxxhaps36282 ай бұрын
Used to say it was pretty useless until I got one at work.... now I'm considering buying one for my hobby. It's just that amazing, but also a bit debilitating, I struggle to navigate models and be efficient with the basic MnK setup now. Worth it 100% if you're a CAD tech'
@garagemonkeysan Жыл бұрын
❤👏Great instructional video. The Space Mouse is super intuitive. Very short learning curve. In fact I'd recommend it for people learning CAD. Mahalo for sharing! 🙂🙏❤️
@BevelishCreations Жыл бұрын
Thanks man! Which one do you use?
@garagemonkeysan Жыл бұрын
@@BevelishCreations I have the Compact. But I should have bought the wireless. 🙂
@els1fАй бұрын
DAMN that's cool! 😱🔥 I saw this and searched to see what it's for. I have no use for this, but I still kinda want it🤣
@monkeysausageclub Жыл бұрын
I've gotten pretty used to using the Stream deck with Sketchup. These would mean retraining muscle memory.
@BevelishCreations Жыл бұрын
It’ll be an upgrade. I’ve tried using a Loupedeck with these programs before, it’s not even close
@DesignCraftWorkshop Жыл бұрын
oh man! that's awesome! Need something like this for my workflow
@BevelishCreations Жыл бұрын
Dude you will not regret it
@darknessblades10 ай бұрын
With the smallest one I know that some people use a DIY macropad for shortcuts trough QMK
@BevelishCreations10 ай бұрын
I haven’t used that one. Not sure how well it works
@shapeshifterboogie9853 Жыл бұрын
Like you could read my mind. I was literally wondering how I would use it with Shapr3D!
@BevelishCreations Жыл бұрын
Hope this video gave you a good idea on how you’d want to set one up!
@FPChris6 ай бұрын
I’m left handed can I use it in my right and my normal mouse on my left? It looks ambidextrous.
@aaronalquiza9680 Жыл бұрын
SpaceMouse wireless looks like a buy for me.
@BevelishCreations Жыл бұрын
Get itttt. 10% off with the link :D
@crashkg10 ай бұрын
Your videos are great thanks!
@BevelishCreations10 ай бұрын
Thank you!
@davidprock9048 ай бұрын
What about for game play, like a 3d world shootem up game?
@BevelishCreations8 ай бұрын
Not sure if it’ll work with that, you’ll need to check their site
@rinellauzakova6832 Жыл бұрын
Omg omg I need to buy both 😍 so useful wow
@BevelishCreations Жыл бұрын
Yessss buy both!
@quanti510 ай бұрын
I love those 3D Mice. I had one when learning CAD/CAM like 18 years ago with Mastercam and SURFCAM. I think it wasn't even called a SpaceMouse back then. I don't do it much anymore, but using 3D software without one still feels wrong. Your justification for having the computer mouse on the right side being because you're right handed seems absolutely bizarre to me. I'm left handed and I use the mouse on the right side too. Aren't 95% of mice ergonomically shaped for the right hand anyway? I don't think I've ever seen anyone use a mouse in their left hand. Just imagining it feels so alien to me!
@BevelishCreations10 ай бұрын
I just meant I still use both a regular mouse and a space mouse. Some people have the space mouse setup on the right side and will use a track pad on their left side. And a few companies make left-handed mice, one of them being 3Dconnexion
@nicolacasali83047 ай бұрын
I'm left-handed and use a left-handed mouse. Right hand uses the SpaceMouse. It couldn't possibly work the other way around for me, not without months/years of relearning.
@stevejones019 ай бұрын
I used an old style Spacemouse (with the ball. Yeah way back when). Once you get used to these you won't want to model without it if you do any type of 3D modeling for CAD/CAM. Will this work in the non commercial version of Fusion 360? I can't find the answer online. All the reviewers us the commercial version. It would make modeling fun again.
@BevelishCreations9 ай бұрын
Yes it’ll work with the non-commercial version. That’s what I use
@sonub54014 ай бұрын
Never heard of this before and I was curious. You're the first video I saw and a helpful one at that. So thank you for that. I was thinking of buying one of the cheaper ones, as I just got into Shaper3D. I couldn't help but notice some little platform thingy behind you mouse. Looks like something you'd rest the heal of your hand on. If you don't mind my asking, what is it and where do I get one? Thanks again.
@BevelishCreations4 ай бұрын
Hey thanks for watching. Yeah it’s a wrist rest by a company called Deltahub
@Weird_guy792 ай бұрын
Damn, pricey.
@kyletaylor35787 ай бұрын
Hey Alex, great explanation of the spacemouse. I've seen people use a loupedeck / streamdeck on there productivity, setups and i've even seen people using the smaller people take the smaller spacemouse and pair it with a small streamdeck. Have you tried to use the loupedeck for CAD? is that even worth considering?
@BevelishCreations7 ай бұрын
I have a Loupedeck and it’s not that good for CAD. I tried it, but it’s laggy and you can’t really do much other than program some hot keys
@nlgordon8 ай бұрын
I've been googling around, and unable to figure out how you mapped a button to switch workspaces in Fusion 360. I've kinda hacked getting back to the design workspace with the any shortcut plugin, but it won't let me switch to the manufacture workspace. Thoughts?
@BevelishCreations8 ай бұрын
Mine is just a workaround. I mapped the key to cycle through the different workspaces. Since I only use Fusion 360 for CAM, it works well for me to assign the key to jump to manufacture from design. But if I need to go back to design, I’ll need to press it a few times to cycle through the other workspaces
@greggjohnson621 Жыл бұрын
When Shapr3D was first adding support for 3Dconnexion, I did this video for them to demonstrate the importance of Lock Horizon. Also the center of rotation was important to show. Their beta was a little rough at that time but it all works quite well now. kzfaq.info/get/bejne/e6ddm8SGzLCxqaM.html
@BevelishCreations Жыл бұрын
Nice! Yeah glad it wasn’t some setting I missed in F360
@NTruske11 ай бұрын
does it work in Pop_OS or nobara Linux?
@BevelishCreations11 ай бұрын
It works with Linux
@aks13v358 ай бұрын
Somebody uses this on Exocad?
@BevelishCreations8 ай бұрын
Exocad is supported. I have not personally used it though. There are videos of people using it with Exocad though
@waltergava503410 ай бұрын
No more coupon available, what keyword is that?
@BevelishCreations10 ай бұрын
Really? Try using the code again. Sometimes you need to do it a couple of times. Not sure why
@waltergava503410 ай бұрын
@@BevelishCreations tried again, saying they reached the limit, I meant which keyboard is on the video
@BevelishCreations10 ай бұрын
@waltergava5034 weird…I’m not sure what’s going on. I can ask. The keyboard I use is the IQUNIX F97 Hitchhiker. You can get 5% off using the code: bevelish on their site
@waltergava503410 ай бұрын
@@BevelishCreations I was able to order with a link from another video, I believe the one where you were modeling with shape 3D, thank you for reaching out
@BevelishCreations10 ай бұрын
@waltergava5034 awesome!
@mairmatt8 ай бұрын
Nice story. But: The guy that has used a shit ton of 3D mice in his job as a designer for the automotive industry is oblivious about this fact in his job as a designer of furniture until the manufacturer of these tools comes back on him to sell their product. Yeah .... sure ... yeah .... I have one of those for years now and they are awesome. But if I was ever to forget about this fact I would stay away from any design software due to the fact that my brain morphed into mush.
@BevelishCreations8 ай бұрын
No…it’s simply because I switched over to designing on the iPad 😂 this program I’m using only recently became available on the computer
@earth35511 ай бұрын
hello does your coupon code work in india? doesn't seem to be working for me unfortunately
@BevelishCreations11 ай бұрын
It should. Sometimes you might have to try a couple of times. Something weird happens with cookies.
@earth35511 ай бұрын
@@BevelishCreations the link in the description takes me to us store. It seems the discount there. and when I change the country and add it to cart and I apply the coupon code . It says coupon code doesn't exist.
@BevelishCreations11 ай бұрын
@earth355 let me ask them…I’ll let you know once I hear back
@earth35511 ай бұрын
@@BevelishCreations thank you so much for this
@BevelishCreations11 ай бұрын
@earth355 I’m still waiting to hear back from them, the guy responsible is on vacation. I’ll let you know as soon as I get back to you. Just wanted you to know, so you don’t think I ghosted you haha
@evgeniydeus81373 ай бұрын
The title is quite misleading, it's posing a question that video doesn't give answer to...
@BevelishCreations3 ай бұрын
The answer is yes…
@evgeniydeus81373 ай бұрын
@@BevelishCreations The answer sounds... expensive)
@planefusionart7 ай бұрын
I don't understand why people are using these in the left hand... I mean why??? Seems idiotic to have two mice when the keyboard is such an essential tool in 3D
@BevelishCreations7 ай бұрын
Because it’s deigned to be used in the left hand…it’s not a mouse
@planefusionart7 ай бұрын
@@BevelishCreationsthe spacemouse is not a mouse?... lol. I mean it's doing the same functions of a mouse except it has more functionality. I get that it was designed for the left hand, I still don't get why.
@BevelishCreations7 ай бұрын
@planefusionart no it’s not a mouse, it doesn’t move the cursor at all
@planefusionart7 ай бұрын
@@BevelishCreations oh I see.. well that's sad.
@HonzaZalabak6 ай бұрын
@@planefusionart its not sad :D some thought was put into designing these things