BFT Motor Setup and Programming for Sliding Gate

Рет қаралды 18,366

Жыл бұрын

Here we pop open the BFT Veloce gate motor and setup it up for use on a sliding gate.
USEFUL TOOLS
Aluminium Post: vtudio.com/a/?a=aluminium+post
Gate: vtudio.com/a/?a=gate
Drill: vtudio.com/a/?a=drill
Drill Driver: vtudio.com/a/?a=drill+driver
COMPANION VIDEOS
Full Guide: • How to Install Automat...
Painting Driveway: • Painting MASSIVE Stamp...
Concrete Pour: • MASSIVE Concrete Drive...
Driveway Prep: • MASSIVE Concrete Drive...
Outdoor Tiling: • Installing Outdoor Til...
Micro Digger Rental: • Kubota Micro Excavator...
EXECUTIVE PRODUCERS
Vijaya Fernando: / @vijayafernando1
SPECIAL THANKS
Thanks for your support and if would like to help us produce more videos, please join us at: vtudio.com/a/?support
MUSIC
Patrick Patrikios
FILMING TOOLS
vtudio.com/tools
Links to products often include an affiliate tracking code which allow us to earn fees on purchases you make through them.

Пікірлер: 19

@bamwa Жыл бұрын

Nice work but you left the square tubing open in the frame. Now you need a cap to keep water out. A miter cut at the corners would have closed all the tubing. What does the upper roller look like that holds the gate vertical? Where did you source that? Thanks

@jb-ik8sj Жыл бұрын

Good job

@bnpparibassss Жыл бұрын

You installed it all yourself??! What a man 😍

@headsoftech Жыл бұрын

Nice one, yeah the full guide is up on Heads of Estate

@bnpparibassss Жыл бұрын

Really impressed mate. Blessings to you and your growing family

@headsoftech Жыл бұрын

♥️

@danielepassone9736 4 ай бұрын

complimenti per il video, vorrei montare un deimos ultra a400 mi chiedevo se il cancello incontra un ostacolo durante il cammino che non è visto dalle fotocellule, come si comporta. grazie saluti

@headsoftech 4 ай бұрын

Yes it stops with enough force, so if you hold your hand out and hold it back it'll stop, but if it's a small object like a leaf it'll keep going.

@hpefr1111 Жыл бұрын

big saving in diy well done

@headsoftech Жыл бұрын

Thanks mate, have you got a gate too?

@hpefr1111 Жыл бұрын

@@headsoftech yes and electric door garage

@headsoftech Жыл бұрын

🤙

@stevezm100 10 ай бұрын

I got a BFT Ultra but some times it stops part way across then moves back a bit and then I have try several times to get it working again. There is no debris on track or obstacles on the sensors, any ideas why it does this? seems to be intermittant too. thanks

@headsoftech 10 ай бұрын

Mine only does this if you physically block its path, I'd double check the gear rack for debris also, or if it's not that perhaps its a warranty issue with the motor or sensors? Let me know how you get on.

@stevezm100 10 ай бұрын

thanks could be sensors, im getting it checked tomorrow@@headsoftech

@stevezm100 10 ай бұрын

ok I got it checked, looks like the "soft edge" sensor needs its batteries replacing! I thought only the fobs used batteries but there you go! so hopefully that will fix it

@Horizon301. 20 күн бұрын

@@stevezm100how old is the system?