Bi-Amp Demonstration with Densen amplifiers from Denmark

Рет қаралды 88,760

6 жыл бұрын

Well known Danish HiFi brand Densen with their very wide selection of products, allowing their users to upgrade with ease. For this demo, we are using the Densen B175 integrated amplifier and their B330 stereo power amp to bi-amp the B&W 705 S2. Kok-yan will show you step-by-step how to bi-amp and, talk about the advantages and disadvantages of bi-amping. Check out this video to see if bi-amping is right for you.
for further info on Densen: 新和偉音響 / newwellwick
please visit our feversound FB page and give us a "like"
/ feversound1
/ feversound1

Пікірлер: 34

@kuangjacky4943 6 жыл бұрын

多谢國仁兄呢集示範。摆响basement 6年的机器重新组合上路

@poyiulu1639 6 жыл бұрын

👍🏻👍🏻👍🏻我想現問用naim supernait2+hicap br用proAc d30r。但在控制底頻不理想！想問是否加後級加強控制而放棄hicap dr和如何接駁。🙏🏻🙏🏻🙏🏻

@angiefox9704 6 жыл бұрын

師兄，我用緊200w合拼機，細座地。如果換大座地，建議功率50w-500w。加部200w的power amp接bi-amp，夠唔夠力推500w大座地？ thx

@tonywong1234 6 жыл бұрын

可以講下 vertical or horizontal biamp?

@ousi00 6 жыл бұрын

下次係咪示範Bridging? 之前我有試過Bi-amp, McIntosh C48 推兩架Stereo amp, Preout 1 + 2. 再之前試過用一架Harmon Kardon Citation 7.1 (4-channel) 玩過.

@calvintam536 6 жыл бұрын

如果我係av amp+ 1部後級~係米姐係一條喇叭線去av amp 一條喇叭線去後級黎駁喇叭?同我用一部後級用兩份amp黎駁喇叭有無分別?

@monsterkan9633 6 жыл бұрын

如果有部合併機有AV pass加一部Naim atom per out可唔可以做到呢？

@user-hw8kw6ij4p 5 жыл бұрын

有机会评测下ak se100

@dodo_9037 6 жыл бұрын

請問naim的合併機可以這樣玩嗎？

@Dickycrane 5 жыл бұрын

Ma9000 配mc275膽機可以嗎？

@sunnymui4066 4 жыл бұрын

国仁兄，如果後级有AB两组喇叭输出(可以A+B同时输出)，又系咪可以好似你锦驳玩Bi-amp A组输出推高音B组输出推低音?!

@cheekionglee613 4 жыл бұрын

你好。我想问的是那台合并机通过pre out 链接去power amp之后，那台合并机的后面喇叭输出是否依然可以链接喇叭呢？也就是说合并机的喇叭输出用来推高音单元，pre out 链接的后级用来推低音单元。是这样的玩法吗？打个比方说，我的合并机原本是60watts的，我加了一台后级是100watts的，这是不是说我的一套音响系统立刻可以提升到160Watts的输出功率了。

@user-cw1ep5xh1v 8 ай бұрын

DanSpeak dp-502 遥控器的图片有吗？遥控器丢了i想配一个

@giftower 3 жыл бұрын

Thanks and support

@kinken9521 6 жыл бұрын

勁啊！連陳立品都試埋！

@ericziea9046 2 жыл бұрын

非常有意用你介紹方法。我見二手有部quad 405-2後級約4千想買來一試，你認為此quad 405-2後級如何?我用港產綜合膽機配Sonus Faber Minima Amator. 希望你給予意見

@feverSoundHK 2 жыл бұрын

405-2 兩部要match，始終年份久遠，零件可能維修過。另膽機夾Sonus Faber是無問題的 👍🏻

@barrychan3046 8 ай бұрын

睇翻舊片都幫到🙄我嚟啲初玩AV Amp朋友😬Thx 國仁!

@michaelyang2119 6 жыл бұрын

Cool

@kirinchin3393 6 жыл бұрын

新手一問: 如果部後級係4聲道或以上, 係唔係可以直接係後級直出bi-amp去喇叭??

@yauyenjee9950 3 жыл бұрын

国仁兄你好，我是馬耒西亚粉丝，請問玩bi.amp一定要前級才可以玩，謝謝。

@feverSoundHK 3 жыл бұрын

用有前置輸出的合併機，接駁到一部後級（同廠較佳），也可以玩bi-amp的

@rickykofr2 4 жыл бұрын

有D唔明⋯我認知的bi-amp應該是一部前級去兩部後級，一部後級推高一部後級推中低。但現在只見一部合併和一部後級，那要如何bi-amp呢?

@eddylau6370 4 жыл бұрын

amp pre out ==> power amp

@matthewlombax560 6 жыл бұрын

Hi! Good day! I have enough knowledge in the world of audio but not the depths of it. I highly trust you so I will be asking you some questions regarding the topic of this video. So my speaker is capable of handling 15 to 500 watts on its power range according to the manual. However I'm confused to its maximum input power which is 400 watts written on the manual as well. I currently my two speakers with a 300-watt monoblock amplifier each. My money and I are good to go on upgrading the chain in a bi-amplified way. The question is would adding two additional 300-watt monoblock amplifiers do the work? Scenario would be: (2) 300-watt monoblock amplifiers for each of the speakers. Will the speaker break or the other way around - the amplifiers? Will this result in totaling the power to 600 watts to be sent to the speaker? I would really appreciate your kind reply on this. Thank you. Matt