BIG & NEW Revell Hurricane Mk.IIb in 1/32 Scale! Plastic Model Kit Build & Review

Рет қаралды 18,205

10 ай бұрын

💥 wtplay.link/modelminutes - Download War Thunder for FREE and get your bonus!
The Hawker Hurricane was a fighter aircraft used by the Royal Air Force during the Second World War. The Mk.IIb variant featured improvements on the earlier variants, particularly in the armament.
Join me in this video as I build and review the Brand New (2023) tooling of the 1/32 scale Hawker Hurricane Mk.IIb plastic model kit from Revell (04968), discovering what this big and new kit is like.
For a closer look at the contents of the kit including the sprues, decals and instructions, watch the dedicated unboxing video here: • Did Revell Miss Someth...
Take a look at the Revell Hawker Hurricane Mk.IIb plastic model kit in 1/32 scale at the official Revell website here: www.revell.de/en/products/mod...
This description box contains affiliate links which allow you to support the channel at no cost to you!
Please consider pledging your support to help keep the channel growing from strength to strength.
Find out what's in-store and how to unlock additional perks here: / modelminutesjoin the channel to get access to perks: / @modelminutes
You can make one-time donations to support the channel via paypal here: www.paypal.com/donate/?hosted...
If you like what I do, why not buy me a coffee over at ko-fi.com/modelminutes
Come join the live conversation over at Discord, chat to other modellers in real time! / discord
If you want to buy any of the kits i've built or recommend - take a look here (it helps support the channel): www.amazon.co.uk/shop/modelmi...
Subscribe with notifications on to help support the channel! / modelminutes
I have a second channel where I like to upload other videos - take a look: / @mattssecondchannel
Let's get social!
/ modelminutes
/ modelminutes
/ modelminutes
This video is intended for adult scale model enthusiasts.Model Minutes holds no responsibility for any accidents, damage or injury that could occur as a result of attempting to replicate any steps depicted in this video. This video is intended for entertainment only.
All information in this video is believed to be correct at the time of editing. Model Minutes holds no responsibility for errors or changes.
Unless specifically indicated, all products have been independently purchased.
Music used from Epidemic Sound:
Left in Haze - ELFL www.epidemicsound.com/track/7... Views - The Big Let Down www.epidemicsound.com/track/T... - ELFL www.epidemicsound.com/track/E... - Autohacker www.epidemicsound.com/track/C... 82 - Ben Elson www.epidemicsound.com/track/J... of Legends - Bonnie Grace www.epidemicsound.com/track/j...
#revell #hurricane #modelkit

Пікірлер: 76

@ModelMinutes 10 ай бұрын

💥 wtplay.link/modelminutes - Download War Thunder for FREE and get your bonus!

@lonkatsa8037 10 ай бұрын

I once had a kit made by a no-face company called 'Zozee Toys'. This was a 1/48 scale kit. It cost 8 dollars, 4 pounds in UK. It was quite literally a snap kit. It just was mostly just snapping together the parts. It was like 30% glue only. It had decent detail and basically no flash. The only flash I found was on the inside of parts. Pretty good for a nobody company.

@ModelMinutes 10 ай бұрын

sounds like a fun product!

@jeff72_ 10 ай бұрын

It does build into a decent kit, some aftermarket or scratchbuilding would sort out the detailing if the builder so wished.

@ModelMinutes 10 ай бұрын

yes i completely agree

@docbrownscalemodels 10 ай бұрын

Im always a bit disappointed when a kit doesnt have options for gear up/down, baffles me. I like the chipping technique, thats a new one for me! Thanks for the vid

@ModelMinutes 10 ай бұрын

Yeah, why wouldn’t you have the option to display the model in the way it was designed to be used 😂 I’m not sold on the chipping yet, think I need more practice

@freemanreed5228 5 ай бұрын

Excellent commentary and excellent build!!!! I prefer modeling shows like yours. Again, keep up the good work!!!!

@ModelMinutes 5 ай бұрын

Awesome, thank you!

@christosswc 10 ай бұрын

I enjoy what I guess is the essence of this hobby which is putting things together, so a low part count won't cut it for me. Having said that, I think one need always factor in the price and I guess a kit this large with good quality, fit and detail is priced accordingly and reasonably, Italeri's new Macchi MC 202 has double the price tag and what you'd expect, lots of parts, PE, 3d decals and lots of other goodies. Size costs and detail costs and so a manufacturer may choose to offer a kit to people who value size and aren't injterested in extra detail and the price tag that goes with it. That's how most of us ventured out nto the world of 1/32 at first, with cheaper kits who's price reflected the extra size only.

@ModelMinutes 10 ай бұрын

Thanks for sharing your thoughts 😊

@Simon_Nonymous 10 ай бұрын

I think that is a very wise look at the world of modelling. I'm from the era when photo etch wasn't around,and if you wanted extras, you scratch build them as best as you can. I've watched a couple of build videos today where most of the PE and 3D printed extras were almost invisible once the kit was finished, but effectively doubled the price of the kit.

@ShuttleFactoryScaleModels 10 ай бұрын

Fantastic Job Model Minutes! You have done a great job on this large-scale Hurricane kit. I curious to know if you ever intended to make a diorama for it? With a set of 54mm (1/32 scale) RAF pilot or ground crew figures. Or for that matter make a 1/32 scale Supermarine Spitfire kit? It seems like a must for a scale model aircraft builder. Build a model of a Hawker Hurricane. Then you must make a model of a Supermarine Spitfire, or vice versa. Anyway, keep up the great work.

@ModelMinutes 10 ай бұрын

lol I could build a diorama for it in the future I suppose, but I ran out of space for projects a long time ago haha

@ShuttleFactoryScaleModels 10 ай бұрын

@@ModelMinutes that is a dam shame but sadly a real problem for the average scale modeller. Once one makes a model........the available shelf space is quickly consumed!

@ModelMinutes 10 ай бұрын

@@ShuttleFactoryScaleModels very true 😂

@derekfellows2848 10 ай бұрын

Hey Matt, you forgot to take the masking off the landing lights........:} :}. Great vid.

@ModelMinutes 10 ай бұрын

Haha yes I did! Fortunately I remembered right at the end of the video

@neilhaas 10 ай бұрын

I watched on Paul Restorer restoration of the Hurricane Mk2b die cast metal model it turned out nicely.

@ModelMinutes 10 ай бұрын

I'll have to look that one up!

@60bui 10 ай бұрын

Lo farò, comprerò le cinture e le maschere per i trasparenti, sto iniziando il Mustang, sempre in 1/32,stessa filosofia e sta riuscendo benissimo!!!

@ModelMinutes 10 ай бұрын

Good to hear you are enjoying the Mustang 😊

@judithhamilton5393 10 ай бұрын

Decals look very good

@ModelMinutes 10 ай бұрын

yeah, being from cartograph they are excellent

@JohnSmith-sl1my 10 ай бұрын

Turned out really nice another fun build . Well done 👍 .

@ModelMinutes 10 ай бұрын

Thanks 👍 glad you liked it :D

@Harry-iv8go 10 ай бұрын

Great build and warthunder is amazing a great sponsor

@ModelMinutes 10 ай бұрын

Thanks! Yes, I was fortunate they wanted to sponsor this video 😊

@Simon_Nonymous 10 ай бұрын

I know you were selfcritiquing about the chipping, but on a matt black night fighter, it's going to look quite contrasty shall we say, and I think it looked realistically done. I'd have to google for images but I would think the four outboard Brownings would have the red muzzle cover patches over the muzzles, not broken through as you portray them here. Eleven out of ten for the stretched sprue aerial wire, I bet that's a skill most modellers don't even know about! Well filmed, I hope you enjoyed it as much as I did.

@ModelMinutes 10 ай бұрын

Thanks! I went off the instructions for the markings on the outboard MGs and they were off-centre on those. If I'm honest, I'm not sure that all MkIIbs had those panels marked so leaving them off could be an option

@Simon_Nonymous 10 ай бұрын

good point; I meant they were all fully patched over, rather than the alignment of the square patches to the muzzles, my poor English sorry! I think this was because they fired from an open bolt in .303", so the patch was there to prevent overcooling of the guns@@ModelMinutes but that's a very very minor detail old boy.

@ninjawithfishontheback 10 ай бұрын

amazing build!, also im am happy to see your channel growing with the sponsor, i was wondering, if you have free time and no ideas i would recommend some tanks, i would say the airfix 1/72 tiger 1 i a good start, you did a amazing job 👍

@ModelMinutes 10 ай бұрын

Thanks! Yes, I'd like to do some more armour in the future :D

@johntreloar8203 10 ай бұрын

Your lucky Mat, I was just going to mention the landing lights and you fixed them...😆😆😆

@ModelMinutes 10 ай бұрын

haha yeah! Glad I noticed lol

@neilhaas 10 ай бұрын

The Hurricane MK2B fought against the Luftwaffe planes. Besides the Spitfire too. RAF ❤😊🇬🇧🇬🇧🇬🇧🇬🇧💯🤗🤩😍 very nice model fighter plane i like it so far.

@ModelMinutes 10 ай бұрын

Thanks! :D

@julianmhall 10 ай бұрын

Great video Matt! A couple of thoughts: I agree with your comment about the chipping being a /bit/ overboard - especially being a night fighter I think the ground crew would repaint anything that might reflect any ambient light. You didn't mention you masked and painted the landing light clear parts.. I'm assuming with translucent paints? Given that as you said there is no flying mode I think it's a bit disappointing kit has no flat spots on the tyres. Re the lack of engine detail and the engine being obscured. I think the cowling on top is a separate piece so if a modeller chose it could be removed to show the engine inside - perhaps as part of a diorama with mechanics working on the engine?

@ModelMinutes 10 ай бұрын

Thanks :) For the navigation parts i painted the internal areas and left the clear parts paint-free. But yes, having fully round tyres would require modification to make them look like they are under weight on the ground. The engine cowling part could be left off, but then an engine would need to be built from scratch (i'm not sure an aftermarket exists yet?) as there is no included engine in the kit, just those mounting points for the exhausts pipes

@arthurmee 9 ай бұрын

Nicely modelled chairs on this model . . .

@ModelMinutes 9 ай бұрын

@roarexenl 10 ай бұрын

hello dear all

@ModelMinutes 10 ай бұрын

😊

@southpaw5483 10 ай бұрын

Thank you for sharing; What type of Spray Booth may you be using?

@ModelMinutes 10 ай бұрын

Thanks for watching! I can’t remember the exact type but they are easily found online (it is the collapsing kind with a vent that can be attached at the back

@southpaw5483 10 ай бұрын

@@ModelMinutes cheers, thank you

@PurplEWolFGaminG 10 ай бұрын

Cool video and great build with the lights on the plane do you think there would be room for l.e.d's for more effect and somewhere for a battery compartment like a button battery pack ?

@ModelMinutes 10 ай бұрын

Yes, definitely, there is a lot of space inside the model given the large scale

@PurplEWolFGaminG 10 ай бұрын

@@ModelMinutes ah thats cool much to think about for my next big build and thank you for the reply

@Henrywinswars 10 ай бұрын

Try using rubber and tires paint I don't know what brand but it works really well on the wheels 😅

@ModelMinutes 10 ай бұрын

Thanks for the tip!

@modelmagic9930 8 ай бұрын

Now you’ll have to try 1/18 scale aircraft

@ModelMinutes 8 ай бұрын

any suggestions? I've got my Airfix Hellcat, Spitfire and Hurricanes in 1/24 to do . . .

@modelmagic9930 7 ай бұрын

Hobby Boss have a range of 1/18 kits could be a good excuse to buy a new kit for go big or go home.

@modelmagic9930 7 ай бұрын

Completed the 1/18 109E was pretty easy

@polygonalmasonary 10 ай бұрын

No seat belts and no pilot figure is a deal breaker, I won’t be wanting to make this kit, but great video as usual 👍🇬🇧🌈

@ModelMinutes 10 ай бұрын

Thanks 😊 yes I would have like decal seatbelts as a minimum

@Lv-sl3rm 9 ай бұрын

At this scale I'd almost argue extra fabric seatbelts are a necessity, but that WOULD increase the cost of the kit and I suspect Revell was aiming for the more budget minded with this one...

@shannonmonroe5873 8 ай бұрын

Why no pilot figure? I'm seeing more kits not including the pilot figure. That sucks..

@pierrelebelgeapau.1175 10 ай бұрын

Hello. Her is no seat belts? It's a little bit "dommage" because youre cockpit it's very complete and we'll done. I seen the Arma Hobby Hurricane in 1/48 scale made by plasmo- plastic models. But the one of Revell look better in 1/32 scale. Beautiful done. I use the booth too bomb spay and airbrush too. Like you I seen. Have a good Sunday. pierrelebelgeapau. I have a KZfaq channel but only for music. Maybe I'm gone buy a camera and make some films. Excuse my english languish but it's not my motherlangegeese. I'm speek and reed normally french. Haha. Good day

@ModelMinutes 10 ай бұрын

thanks for watching! I'm glad you liked my model :D

@davidhinkson8856 10 ай бұрын

Came out nicely in terms of the paint and weathering but for a 32nd scale kit it is a bit too simple, unless you want to build something bigger that isn't overly technical in nature because you don't want to deal with all the fiddly parts a smaller well detailed kit would have. I've just got back into building WW2 72nd scale fighters and I've lost or broken many smaller parts.

@ModelMinutes 10 ай бұрын

thanks for sharing!

@KHKH-os6kt 9 ай бұрын

Hurricane flaps and area were all silver.

@ModelMinutes 9 ай бұрын

Really? I just followed the instructions from Revell and they said they were green

@coreyward9000 10 ай бұрын

Nice build as normal but the fit looks crap for a new kit, the fitment of the gun barrel sections on the leading edge of the wings is a fucking war crime on a 1/32 kit which Revell should really know to do better by now...

@ModelMinutes 10 ай бұрын

They seemed a little small so probably I pushed them in too far

@coreyward9000 10 ай бұрын

@ModelMinutes definitely not your fault, just looks like revell not being careful enough with kit tolerancing. Keep up the good work 👍

@ModelMinutes 10 ай бұрын

@@coreyward9000 thanks 😊

@polygonalmasonary 10 ай бұрын

If they sold out twice, why do they need to offer a 60% discount??? Advert in between video for ‘bear skin hoodie’. Six zip pockets on the front, 10 extra pockets on the front and sides, this ensures you never find your keys when you need them 😂🇬🇧🌈

@ModelMinutes 10 ай бұрын

Lol I’ve seen that one on KZfaq, it is certainly a jacket with a lot of features 😂

@modelmagic9930 10 ай бұрын

It’s just you tube shoving loads of pointless ads

@ModelMinutes 10 ай бұрын

@@modelmagic9930 well, if people pay for the ads then KZfaq will push them out lol

@modelmagic9930 10 ай бұрын

@@ModelMinutes yeah true lol