How to fix a leaking car windshield DIY video

Рет қаралды 100,946

11 ай бұрын

Buy the windshield glass sealant here: amzn.to/45dcWHM
Today I will show you how I repaired my windshield that was leaking into my car. When it rained we would get a bunch of water into the bottom of our car by our feet. We placed a little product to close up the leak in our windshield. If you have any questions, leave comments below and we would love to answer them. We cannot be held responsible for any problems during your repairs or installations and cannot guarantee that this fixes your problems. Please take caution and wear appropriate safety gear. If you do not have experience with this type of project, please seek help from a professional. Any injury, damage or loss that may result from improper use of the tools, equipment, or from the information from this video is the sole responsibility of the user/viewer and not from Big Al Repairs.
This video may contain a paid promotion. As an Amazon Associate we may earn from qualifying purchases from the links provided.

Пікірлер: 100

@grntchstrmdws 5 ай бұрын

I really appreciate your diagnosis and proof. Recommend masking the areas you don’t want the sealant to cover with yellow frog tape. This will allow you to push the sealant into the gaps more aggressively and tool it to a smooth finish. Immediately remove the tape before the sealant skins over.

@BigAl-1 5 ай бұрын

Thanks so much for your comment and recommendation. Best of luck with your next DIY project and hopefully you subscribe to Big Al Repairs.

@theexcelguy101 11 ай бұрын

thank you for the helpful windshield video mine was leaking as well

@BigAlRepairs 11 ай бұрын

thanks for watching

@lauriehymas4592 11 ай бұрын

That would save so much money instead of taking it to a dealership. Great video.

@BigAl-1 11 ай бұрын

Thanks so much for your comment.

@carsonhymas2229 6 ай бұрын

Nice

@natelambson9677 11 ай бұрын

Thanks for the great windshield video!

@BigAl-1 11 ай бұрын

Nate, thanks so much for your comment. Best of luck with your next DIY project and hopefully you will subscribe to Big Al Repairs.

@mohummus3235 11 ай бұрын

you really can fix anything big al! nice video

@BigAlRepairs 11 ай бұрын

Thanks!

@auginater4200 4 ай бұрын

Thankful for you sharing your experiences, sir. Subscribed

@BigAlRepairs 4 ай бұрын

Thank you so much! You are awesome

@issuru 8 ай бұрын

You could try making the tip flat with pliers. And the glue will get in with ease

@BigAl-1 8 ай бұрын

Thanks for the suggestion. I will have to try it next time. Best of luck with your next DIY project and hopefully you will subscribe to Big Al Repairs.

@prometheus1901 5 ай бұрын

Great idea

@BigAl-1 5 ай бұрын

@@prometheus1901Thanks for your comment.

@matthewa6966 5 ай бұрын

hey thanks for a great video , helpful sir

@BigAl-1 4 ай бұрын

Thanks so much for your comment! Best of luck with your next DIY project and hopefully you will subscribe to Big Al Repairs.

@remodelassets6523 3 ай бұрын

Take a thin wood coffee mixer and tool it down into the windshield gasket groove seal 😜

@BigAl-1 3 ай бұрын

That is a great idea. Thanks for sharing. Thanks for your comment and best of luck with your next DIY project and hopefully you subscribe to Big Al Repairs!

@YH7R 7 ай бұрын

Great content thanks

@timothyhua1477 6 ай бұрын

If you wanted to look like crap in about a month down the road due to weather conditions.

@soorajarm7137 8 ай бұрын

Sir I’m Going to try , thank you so much

@BigAl-1 7 ай бұрын

Best of luck and please give us an update.

@vimalraju4628 8 ай бұрын

Thanks a lot sir...

@BigAl-1 7 ай бұрын

Thank you so much for your comment.

@gabrieljefferson2591 3 ай бұрын

Thank you

@BigAl-1 Ай бұрын

Thanks so much for your comment! Best of luck with your next DIY project and hopefully you subscribe to Big Al Repairs.

@johno6637 9 ай бұрын

Thanks my leak is in exactly the same place ,just ordered same sealant of eBay. :)

@BigAl-1 9 ай бұрын

Thanks so much for the comment. Best of luck with your repair. Please give us an update when you’re finished. Our windshield still does not leak almost two years later.

@EHill-xz6fn 5 ай бұрын

@@BigAl-1 did you mean it is STILL leaking or NOT leaking after two years

@BigAl-1 5 ай бұрын

@@EHill-xz6fnThanks for bringing the error to my attention. It is not leaking. Best of luck with all of your projects.

@lindlamb8691 11 ай бұрын

Interesting windshield video

@BigAl-1 11 ай бұрын

Thanks so much for your comment. Best of luck with your next DIY project and hopefully you will subscribe to Big Al Repairs.

@Nickm32797 6 ай бұрын

My impalas giving me the same problem, I’m gonna try this too. It’s always coming from that little corner by the windshield and in Ohio we’re getting pounded with rain

@BigAl-1 6 ай бұрын

Thanks for the comment. Best of luck with your project and please keep us updated. Thanks again and hopefully you will subscribe to Big Al Repairs.

@andydufresnefromshawshank5866 6 ай бұрын

So how did it go?

@Nickm32797 5 ай бұрын

Hey guys, it went great! I put plenty of the sealant on, and even tried the jug of water trick as an experiment and it worked like a charm! Now my electronics won’t prevent me from starting the car, cheers 🍻

@BigAl-1 5 ай бұрын

@@andydufresnefromshawshank5866Thanks for your question.

@BigAl-1 5 ай бұрын

@@Nickm32797 thanks for the update.

@juanitacomstock3455 4 ай бұрын

Mine is leaking in cabinet filter. Unto floor board . I had windshield but in about a year ago . I don't think windshield is sealed right . Need some information on what may be causing this . I had someone check to see if stoped up . But it's good that way.

@77heathcoat 6 күн бұрын

Similar problem. Water coming in at the bottom of the windshield. I assume the same fix would apply? Did you get yours to stop.

@danielhill4446 2 ай бұрын

Looks exactly like one of my caulk jobs.

@BigAl-1 Ай бұрын

He must be good at caulking. Ha ha. Thanks so much for your comment! Best of luck with your next DIY project and hopefully you subscribe to Big Al Repairs.

@bloomerb4162 6 ай бұрын

Needs to be in caulk gun so you can force it in small areas. That probably won't work or last very long.

@BigAl-1 6 ай бұрын

Thanks for the suggestion. Luckily it has been holding strong for almost 1 year.

@bloomerb4162 6 ай бұрын

@BigAl-1 I just made a big mistake. Leak in truck and I found some permatex flowable silicone still in package, in garage. I knew about expiration with this kind of stuff but used it anyways. So after 3 days it was still tacky. Looked up date code and it expired in 2007

@carsonhymas2229 6 ай бұрын

Nice!

@BigAl-1 6 ай бұрын

Thanks so much for your comment!

@Len_Villain 6 ай бұрын

Impala doing the same thing, but not the windshield I’m assuming from the sunroof . Waters coming from the comfort light

@BigAl-1 6 ай бұрын

Thanks so much for the comment. I wish you the best in figuring out the problem and please give us an update.

@GenaralZod 8 ай бұрын

My Altima leaked on the driver side. i sealed it the same as you did. I hope it fixed it.

@BigAlRepairs 8 ай бұрын

I hope so too! Let us know how it worked for you. THanks!

@BigAl-1 7 ай бұрын

Please let us know how it turned out.

@GenaralZod 7 ай бұрын

@@BigAl-1 It did not fix it. I have to try something else.

@UncyPucky 3 ай бұрын

Same exact issue with me 13 civichad the windshield replaced by safelite because insurance covered it, about 5-6 months later i noticed the carpet was soaked, turns out it is leaking in the top corner of the inside seams above the headliner. Safelite tested it twice and said it wasnt the windshield but im not buying it, im taking it to a mom and pop auto glass shop to have the pull the glass and re seal it, i also was thinking it was the seam sealer in the roof channels but it still leaks

@BigAl-1 3 ай бұрын

Thanks so much for sharing your experience. It sounds like you have the same problem that I had. Best of luck and please give us an update. I’m curious how much they will charge to re-seal your windshield. Hopefully you subscribe to Big Repairs.

@UncyPucky 3 ай бұрын

@@BigAl-1 well ended up fixing it myself, used seam sealer instead of silicone this time, had to put two layers on along the top corner of the windshield and about an inch down the down of the windshield

@BigAl-1 3 ай бұрын

@@UncyPuckyGreat job! Thanks for the update. I hope it works out well. Have a great day.

@chrismahfouz6837 7 ай бұрын

Best to go ahead and have the windshield removed cleaned and resealed. Can get through the smallest of spaces and before you know it, you’ve went around the whole windshield and it still leaks.

@BigAl-1 7 ай бұрын

Thanks so much for the suggestion. That is always an option. We were trying to save a few dollars. Best of luck with your next DIY project and hopefully you subscribe to Big Al Repairs.

@timothyhua1477 6 ай бұрын

Remember when you poured water at the bottom off the windshield you will never find leak down there because water can never travel up. If you have water inside the car when you do that, that means your drain hole is clogged.

@BigAl-1 6 ай бұрын

Timothy, Thanks so much for the information. Best of luck with your next DIY project and hopefully you will subscribe to BIG Al Repairs.

@XDMIIIIIIIII 5 ай бұрын

How much is that roughly for normal brand cars

@BigAl-1 4 ай бұрын

It depends on what kind of car you have. I paid around $400 for the last windshield that I had replaced.

@consumer1073 2 ай бұрын

would this work for a decent sized gap in the front part where you first poured water in the beginning of the video? mine has a pretty big gap where the rubber lining has separated revealing the edge of the glass

@BigAl-1 Ай бұрын

Great question! You should probably use a different method to fix a large gap. Please give us an update. Thanks again and hopefully you will subscribe to Big Al Repairs.

@154g 23 күн бұрын

Try regular silicone

@darienmead9667 11 ай бұрын

Is this a 2012-1013 civic? Trying to diagnose my wet floorboards

@BigAl-1 10 ай бұрын

Thanks for your question. This is a 2012 Civic GX. Please let us know what you find out. Best of luck with your project and hopefully you will subscribe to Big Al Repairs

@darienmead9667 10 ай бұрын

@@BigAl-1 it was a combination of a windshield leak and AC

@BigAl-1 10 ай бұрын

@@darienmead9667Thanks for the update. We’re you able to fix the problem? Best of luck with your next DIY project.

@darienmead9667 10 ай бұрын

@@BigAl-1 my car is dry for sure. Still have VSA and power steering lights on. I believe water was dripping on EPS module. Thanks

@BigAl-1 10 ай бұрын

@@darienmead9667 That is too bad that the lights turned on. Hopefully you can get that issue resolved.

@machineman6498 8 ай бұрын

👍

@BigAlRepairs 8 ай бұрын

Thanks!

@lindseylambson9669 11 ай бұрын

Why would a windshield be leaking like that?!

@BigAlRepairs 11 ай бұрын

thanks

@user-ew5pu8yz7d 10 ай бұрын

Because the windshield in this car was changed at some point and proper installation methods weren’t followed causing the bond to not correctly adhere between the glass, urethane and body. They likely didn’t clean, prep or prime. This is why you should always choose a certified auto glass shop, make sure and read their reviews. I’m an auto glass shop owner/operator and fix hack work like this everyday. I do thousands of cars a year and none of my installations leak.

@KameronKinser 10 ай бұрын

Thank you for sharing this was super helpful!!

@pkginbro6456 9 ай бұрын

It could also be a dried out seal to, it’s not always because of a windshield change. We had it happen to our factory windshield.

@timothyhua1477 6 ай бұрын

Man you doing it all wrong and making it look like crap after awhile. Proper way to do it is remove the inside pillars and cock urethane along the seal and pressed it in and smooth it out with your finger.

@Boinks 5 ай бұрын

If you do this to your vehicle and bring it into any larger glass replacement shop in the future they will not touch your window. do this at your own risk. But my shop will turn you away

@BigAl-1 5 ай бұрын

Interesting. Maybe you can explain why the windshield leaked. Poor installation?

@Boinks 5 ай бұрын

@@BigAl-1 poorly cleaned or primed pinchweld or polyurethane bed where the installer applied adhesive, rust, natural separation due to adhesive or primer failure from factory install.

@allenh6065 5 ай бұрын

@@Boinksthanks for the update.

@user-ew5pu8yz7d 11 ай бұрын

Just call a professional auto glass guy that will fix it the correct way. This is a temporary fix at best.

@BigAl-1 11 ай бұрын

@user. This is an old video. We fixed the windshield over a year ago and it is still holding strong. Saved us over 100.00. But yes, you can get a “professional “ to fix it. Thanks so much for your suggestion and best of luck with your next DIY project.

@user-ew5pu8yz7d 11 ай бұрын

Just call a professional auto glass guy that will fix it the correct way. This is a temporary fix at best.

@BigAlRepairs 11 ай бұрын

This saved us over $100 and worked great until we could get a new windshield. Thanks for the comment

@chrismahfouz6837 7 ай бұрын

Water intrusion and the condensation that will follow will cost a LOT more. Electrical damage being a prime danger!