Thank you 🙌🏾

Conundrum is the perfect description. Even if we didn’t get the form factor of the BSB, it would be great if other manufacturers could significantly reduce the weight of their devices.

Yeap, agreed. I love the pimax crystal but hell, it’s the first time I’ve seen my 4090 sweat and the amount of cables I have to hook up to it just to work around the dumb battery pack design as well as the ginormous headset. But….Visually, I think it’s brilliant so much better than quest 3 for PCVR IMO. Personally speaking, my wholly grail is when these headsets support resolution per eye of 3840x2160, no video signal compression, no foliated rendering, no third party software to improve performance, no tweaking. These things ain’t cheap so my expectations are high as I’m keen to get rid of massive screens on my sim rig and all of my half-baked VR headsets. Just give me what I see on my 4K OLED 120hz monitor straight to my eye balls! Side note, 8K will be really hard to drive with current hardware, speak to my 4090 about it… it’s hooked up to a Samsung G9 57 inch monitor which is 4K+4K (7680x2160) but I can’t bring myself to use DLSS. 5090 better be powerful enough for the next gen PCVR headsets. Get rid of stand alone VR mode too, leave that to Apple and Meta.

@@deesee76 I'd like some kind of gyroscopic based tracking, no ,more reliance on light stations or other signals that can be disrupted.

Thanks, I hope it was useful.

Thanks. Glad to hear you too have no regrets.

It really is.

Thank you. I completely understand that nervous angst. I did the face scan and IPD measurement multiple times. I was certain I’d mess it 🤣. I’d love to hear how you find the Crystal Light. Here’s hoping you receive it soon 🤞🏾.

Thank you. May I ask what the Varjo is like, because that had previously tempted me A LOT!

Thanks. I forgot to say in the video, I’ve been wary of using the clip - it looked like it’d crimp the cable over time and I didn’t want to potentially introduce a stress break in the cable (unlikely, I know 😏). But yes, you’re right - it would resolve it.

I’ll try that, thanks. Let’s hope I don’t forget and get up too quickly 🤣. I might also look into an alternative grip to the one it ships with (it’s a little too tight for my liking).

@@MAWvR3ALITY yeah, it’s more of a permanent solution, but u get used to it quickly. Are u a sim racer only? I appreciate the review. I just would need foveated rendering and I’m not sure about the fov but otherwise this is the perfect headset. I still use the g2, it’s a shame there hasn’t been an all rounder like it on sale again.

Thank you. How have the first 60 days been for you? How’re you finding the LM 2.0? I might look into getting one; I had the first unit but couldn’t ever get it to work 100% consistently.

I’ve seen there are counterweight options to relieve some of the weight of the Pimax headsets, perhaps look into those. However, yep - I hear you on those 6-HR sim-racing sessions. I don’t know about other users’ experiences, but my Pimax 5&8KX box started digging into my forehead after 2 hrs. I’m not sure if it was because I didn’t ever have it positioned well enough on the back of my head to take the strain. I tend to think it’s just because there’s only so long you can hang something that large off your face before gravity wins out. I’d love to know what you finally decide on.

I have an og crystal, and the comfort is pretty good, but it is a noticeable weight on your face after an extended session. Also, if you have a quest 3 the crystal isn't that much better in terms of clarity. It does have a higher resolution screen, but because of the lenses, it's a bit more blurrier on the edges, which can hurt the overall experience.

I have both, Q3 and the original Crystal. The Crystal in terms of resolution and visual fidelity beats the Q3, I got the top strap and counter weight mod and I can game 4 hours straight no problem. I fine tuned mine so its as comfortable as the Q3 with a bobovr strap. If you’re planning to build a rig with a 4090 like I have, the crystal is probably the best headset to pair it with. If not, the Q3 will do you just fine, I just cant stand those cheap LCDs on the Q3 after I got a taste of the crystal panels.

Quest 3 is a streaming headset wich has tons of compression artifacts and double the input lag vs a PCVR headset with Display Port connection.

Did you get something else or just sitting this round out? I’m going to be so conflicted if the BSB2 becomes available in the next 12-18 months 😂.

@@MAWvR3ALITY Rocking the Varjo Aero since December 2021. Very statisfied with it ever since and nothing has pulled me away from it. Have no interest in XR-4, want something to go with Steam Base stations, loving the small form factor of BSB. Allthough I don't mind if they shift the balance a little more towards functionality. Let's say, a BSB, with Quest 3 lenses, so a slightly bigger headset (probably), maybe less intrusive facial interface (my lenses always fog up), active cooling fan like Aero, either Micro Oled or Local dimming Qled, at least 2880x2880 res, don't mind the fixed IPD, but no glare and better fov. Keep as lightweigt as possible and better cable routing, maybe through top strap? Don't care for eye-tracking. Anyway, that's what I dream of ;)

@@gijslaumen1354 that sounds like a headset I’d buy too 🙌🏾

If the BSB didn't exist, I'd probably go for the Crystal Light ahead of the 12K. However, I believe the Crystal Light is ~3X heavier than the BSB, covering the same facial area as the 8KX and 5KX. So I'd still be happier with the BSB, just my preference 🙂.

Thanks 🙌🏾

Thank you. If you're able to hold out and wait, perhaps you'll have options from some of the other manufactorers making small format headsets. Or (fingers crossed) BSB figure out how to widen the sweetspot and solve the glare in a newer model. You'll have to come back and let me know if you give up staying strong and can no longer resist the urge to buy something 😂.

I'm still using the OG Vive too, although heavily modified with the frankenstrap mod, which makes it very comfortable, and the Gear VR lens mod, which removes the bad glare and god rays. The OLED panels in the Vive are great, even if the resolution isn't super great.

@@MAWvR3ALITY The itch grows stronger by the day, but I know I'll be kicking myself if I upgrade after this long and miss out on a V2 or an option from another brand by 6 months. Sure is tempting though.

@@Starmast3rmusic What strap did you put on yours? I'm still using the basic cloth strap. I made a ~1mm pad to bring my lenses closer for better FOV and then added foam to spread the weight, which also minorly improved clarity, but that's all I've done to mine. Sounds like the lens mod may be worth it if I'll be hanging on to the Vive for a little while longer.

Urban legend 🤣. I have to admit, I thought it would be here by now.

Someone else mentioned the Visor Immersed, that form factor looks appealing too.

Thanks, glad it was helpful. You’ve reminded me of things I should have covered, so thanks - they’ll be day 200’s update topics 😆. Every so often, if I’ve turned on the PC and left the headset for a while - the left eye has no image. Unplugging and plugging back in, the power resolves it. If I grab the headset to peer out, my fingers block the base station reception and grey out the view. Some games (DCS, MSFS 2020) don’t track in all degrees of motion if I have OpenXR/Composite active (or vice-versa). I have to use the multithread command modifier for DCS and (I think) disable OpenXR for MSFS 2020. Not sure if it’s placebo, but that’s what resolves the tracking issue with those two games for me. I edited it out of the video but, with the BSB I can shake my head left and right quite a bit before inertia takes effect. So quick glances result in no movement, it’s overly exaggerated shakes that shift it. With the 8KX the inertia effect was much more noticeable. Especially if I slackened the head strap to relieve pressure on my forehead.

@@MAWvR3ALITY Thanks a lot - DCS is my main sim, so that was helpful answer - now I have to find someone willing to 3d-scan my face :)

@@gaudin5573 good luck with the 3D scan. They really need to fix that 🤦🏾‍♂️

Thanks. I hadn't heard of the Immersed Visor - I'll have to look into it. How long is your pre-order? I hear you on growing out of love with Pimax. I'm still glad I went Pimax after my CV1 - however, there were times when I wondered if I'd have had a better experience going the Reverb route instead.

Glad to hear day two was a game changer. Out of curiosity, what made the difference on day two?

@@MAWvR3ALITY asetto corsa competizione.. im really immpressed by the clarity, coming from index its a game changer. i forgot about the sweetspot and small fov. when we drive we look straight anyway.. so its not a big deal anymore only glare when its night time.. but the black level is Amazing, so i can forget the glare few days after

@@moncimoovah yes, ACC looks so much better in the BSB. Here’s hoping🤞🏾 you have many more day twos to come

@@MAWvR3ALITY RE2 remake, and cyberpunk 2077 also quite a game changer with this headset... but when u play other games like beat saber, or superhot... yuckkkk.. all u think about is the small sweetspot again lol

@@moncimoov haha - for me it’s in-game menus that are fixed in place, so you can’t pivot to look at the edges 🤣

Thanks. That’s it - I really need to stop getting distracted with other stuff and get back on track with you guys.

The BSB has a 5M USB C from the headset into a link box that connects to your PC via two USB 3 and one DP1.4 connection (that must connect to your GFX card directly). www.bigscreenvr.com/mybeyond# “Connecting the Link Box to your PC Connect the two USB 3.0 cables ⦿ on the Link Box to two USB 3.0 ports on your computer. The Link Box's DisplayPort 1.4 cable ⦿ must be connected directly to the Nvidia or AMD graphics card on your computer, and should not be plugged into your motherboard. If you're using a laptop, you will either need a Mini-DisplayPort to Displayport 1.4 adapter. or if your laptop has USB-C DisplayPort (also known as DP Alt Mode), you will need a USB-C to DisplayPort 1.4 adapter. “

Sounds like I might need to auction off an arm and a leg to get ready for the pre-order list when the BSB2 is announced then 😁

@@MAWvR3ALITYMeta are planning on the lg 4k micro oled for their next headed,that would I'll be £500 Ish so panels might be cheaper than we think

@@brettgrievesfingers crossed 🤞🏾

Good point - there really isn't a lot in it.

Hopefully they resolve that if/when they release a v2.0

Decisions, decisions. I totally get the hesitancy, it’s a high price tag to gamble on. I genuinely haven’t noticed any screen door effect. If it’s there, I’m just not aware of it. This was my first impression: kzfaq.info/get/bejne/esmTlKV43rSoemw.htmlsi=mlCvuZvOiNkn_pFb In it I was blown away by how clean and clear images were compared to my previous headset. At the time I didn’t even notice a sweet spot (which I now know exists). Compared to what I was used to seeing in AC, ACC, rF2 etc., in the BSB - particularly in AMS2, it had me questioning if it was an even better image than my 4K TV (probably due to it being clean, clear, and 3D). This was me testing if I could read tiny font in MSFS: kzfaq.info/get/bejne/ob-dl9GSvqfRl4U.htmlsi=w99bXLt-FvCmr3AB I could, mostly - especially text that was illegible before. I noticed the glare on this video and the sweet spot. It’s a shame you can’t get hands on a unit to test before you buy.

@@MAWvR3ALITY Thanks for your comeback.. apart from the OGV's bulk, the second thing that bothers me the most, only when i notice it, is the screen door. At this screen resolution should be a thing of the past or barely there if you look for it.. I also use it mostly with AC and i also just tilt my head, even though i modded my unit with the clear Samsung lenses.. Will keep chewing on this.. thanks for your info.

@rodrigomartinelli741 I don’t want to influence your decision (be liable if you buy then hate it 😏) but I’d be shocked if you were disappointed with screen door. I found this video really helpful when I was first considering the switch: kzfaq.info/get/bejne/praJgtCT1crOlnU.htmlsi=9di4FcNOTwd1Canf He does a through the lens comparison.

@@MAWvR3ALITY Worry not, as i said, been chewing on this for months.. still have some time tho.. there are two taxes in my country wich make anything you try to import and its shipping, *twice* as expensive.. hopefully in a few months it'll be gone so i have time to make up my mind.. Thanks again for your time.

Don't think I haven't considered 😂🤣😂

Thank you - I really appreciate that. That's also a great idea - thanks, I have plenty of spare velcro. I forgot to mention in the video, I've deliberately avoided uses the cable grip at the back of the head-strap, as I fear it will crimp the cable.

Makes perfect sense. It would be nice not having to rely on (buy) base stations.

You probably only “need” one. As long as it has good line of sight with the devices sensors. I use two, to account for the awkward layout of my room.

@@MAWvR3ALITYthanks, do you need controllers

⁠@@giannilagastnp, no VR controllers needed for sim-racing, but you might need one if you have to navigate the Steam VR menu (to reset your seating position etc.) Although, you can probably do this via the Steam VR desktop menu (with your mouse). You’ll need your pedal, wheels, game controller for the game/sim though (I know you know, just making sure 😊).

Thanks 👍🏾, it’s primarily because this is based on my personal experience upgrading to the BSB from the 8KX and the choices I was considering at the time (Pimax options). It’s also a follow up to my previous video speaking about my initial impressions having made my choice.

The problem is, as with all PC related buys, eventually you have to stop waiting and just buy something 😄.

@@MAWvR3ALITY yeah that's why I am getting the Somnium vr1 now . Hope to see you on the Somnium Connect show 🫶🫠