Thank you for this awesome video and thoughtful suggestion for a practical fix to the BMW window clip. Installed it just like you said and window is now working flawless. Thanks again!

One of my customers has this same issue on a 2002 X5....... Thank you VERY much for taking the time to make this video and for the great tip (smile).

Pretty clever- I own 3 BMW - X5, 535is, M3. I never would have figured this out on my own. Thank You

Wow excellent my wife yesterday had window come down raining, ,dark etc so i stripped the driver side door and have found the exact problem on her 2004 e52 x5 first time in the 7 years we had it,really good informative and cheap improvement on original .Shopping tomorrow thanks a bunch

Thanks buddy appreciate this great video. I’ve always had problems with my window regulator 06x5 e53 3.0. I finally fix it and it’s wrkng great 👍🏻 thanks so much

This really helps, I've been having trouble with my driver side window for months.

Man your the best bless up yu self It help out a 1000% .continue doing your videos. God bless you

Awesome fix!! I lost that damn clip bushing. Somewhere! It fell, don't know where to. License plate screws. Genius...

NIce work, Good video, very helpful. Thank You!!

Maybe my '02 X5 that I bought new is different, but when I changed my driver's side window regulator I also replaced the black clips that Bimmer Dude mentions here. My black clips had the factory metal inserts in them (this is the part the bolt passes through, which appears to have been missing from Bimmer Dude's black window clip), which I reused on the new black clips. To be clear, where Bimmer Dude inserted the white plastic license plate mounting piece into his window clip, my window clip already had the metal factory insert in place.

Good info ! I am planing to do the same on my 2001 E53 X5

Very well made and helpful tutorial video!! Did you place a nut on the backside when you screwed in the Hillman kit screw and expansion washer? I'm assuming you didn't . Also, were there any fixed spacing issues using the screw and washer from the Hillman kit?

Great Idea , Thank You for Sharing.

Hello and thank you for this well shot video. My window motors are working fine, can I only replace clips or should I also do the actuator frame/motor? Thanks again

Great video thanks a million

How many oem black clips did you use 1 or 2 with the license plate piece sandwiched in-between the 2?

Nice work man..

You are a genius. I am in your debt. Subscribed Thank you

Thanks for the video. I just picked up an '03 X5 and sure enough..the rear drivers side window is no longer connected to the regulator so it falls down as you hit bumps. I can here the regulator working when you hit the button but the window doesnt do anything. I couldnt help but notice that gorgeous e36 with hard top in the background!! Very nice

Thanks for the vid. All the plastic clips and parts on our X5 just shatter when i try moving them. Very brittle. Hope our windows never break down again

Thank you bru ,man you about to be my new Scotty kilmer😁for bmw

Thank you my fellow driver

Thanks a lot! worked well.

where did you you the scews please, and what is the model od screws, thank you

Rad! Thank you sir!

If you disconnect the battery FIRST you can unplug the airbag and you will not need a code reader to clear the error. REMOVE BATTERY TERMINAL FIRST! Before playing with airbag connector. Then plug airbag bag in, finish window then reconnect battery.

What about the plastic pulley how can I upgrade it so it last longer and dosent twist up ?!

The door clips look identical on x5 318i e46 e53 or even x5 are they the same? Plenty x5 available not many e46 , thanks

just got an 02 e53 with window issues thx soo much.

Is it really safe to move around the airbag module with the battery still connected?

tHIS IS JUST WHAT i NEEDED

Nice idea to reinforce the cljp.

Good work

Do you have a link for the exact screw kit you used?

Can’t find a link on the description on those parts. Where can i get them?

Can you put a link for the license plate screws in the description?

Doing this now on my 05 e53 ,,,good times

fantastic. just need to get those license plate pieces here in australia.

Where's the link for the license plate screw kit?

I Came to Lowes on The Nuts ,bolts and Screws Aisle..So I hope that helps!

Like a black MacGyver!!!! I love you!!!

Good Job....these regulators are the BANE of the X5 existence!!

Nice job only food clear video on the clip replacement.

Hi ... I can’t find the link for the license plate screw. Can you send it to me?

The license plate screws in genius brother ingenious thank you very much I grew up in the 90s working on Chevrolets I’ve just recently got a X5 any tips that anyone have please add him to this I would love to know also there is a chip that you can take out that regulates the governor anybody know where the videos video is

Dude, Awesome, you the man! Thanks for the mod, the link and the tutorial. Hey do u have a link to a regulator with motor that has proven to be quality that you use? Thanks 😃

Sorry, girls question in da house. Where did you get the "Hillman Truss Slotted 0.625 in License Plate Screws #884270. Also you mentioned you were going to link how to take the panel off

What is revers way?

I cannot see the link to buy those.

Where can I find this parts?

Where are the links?

Looking for the links in description?

Where's the link for the HILLMAN hardware? I can't seem to find those things anywhere

sorry finally showed it!

Beamer dude that was a cool mod. A lot of beamer fans tend not to do what bmw hasn't did. And that is exactly what you did! Bottom line is to get a better fix than that of the factory. Reason they do these type of non permanent attachments so that everybody that being the companies that produce such nuts, bolts, clips,blabla bla . Sharing the spoils.. Keep up the cool mods beamer guy! Cool vid.

does anyone you have a link or part number for the window clips? the ones that are actually for the window prior to mod.

After you cut the top off the clip you mention installation is reverse ?? What do you mean ? (and cutting the clip didnt make sense);

Great video---can you share the links please? Thanks!

I just bought an 08 328i for 700 and it has a window that won't stay up. I'll be trying this next weekend. Thanks

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

I'm doing Maine, i replace the regulator too

You didn’t even show which direction or how it went together????????

the link please.

Here I am doing it again.

just tried to find them - no one seems to have them any more...

Your installing it back wards I put the clip the same way you did what out the modification and it fell out you need to specify that your doing it backwards to modify it

Have you had a window regulator break after this fix?

Hey Bimmer Dude!! I have a 2003 BMW X5- How do I know if it needs the Motor replaced or just the clips and regulator Without the motor?? Need to try and fix this myself, I'm in a pickle as to what I actually need to fix?? It's the RRear window and will roll about half way up and Stops! I have it covered with tape to keep the rain out!! Will order the part when I KNOW what it needs. I've watched dozens of videos and so far-Yours is the easiest to understand. Thanks for being precise! I know it's hard to diagnose without "Hands On", but can you tell me What to look for to know if I need a new regulator with or without motor?! Appreciate anything you may can do to help! I subscribe to your channel, so you should be able to send me an email. Thanks again-These Bimmers?! Gotta Love 'em!!

Gloria Joan Brooks- Owensby 3 mins · Bimmer Dude!! Does this look like the regulator with motor that fits the right rear power window of the BMW X5 2003 30!-If this is it, I want to order it and Attempt to replace it myself?! Yes, I'm Very ambitious and looking forward to trying it! Thank you, Gloria The photo won't go through--ERRGG!! Send me a picture, if you can?! Please!! Thank you SO Much--Gloria

German engineers - lets overengineer everything and make the whole car more complicated. Yes lets do that. [result takes about 2 years] A crafty person - I just clip off a part from your highly deveolped engineering result, flip it around and add some general store plastic so it works better. [result takes about 2 hours]

Video was informative , job done! Only one complaint...well....here let's say it together.. b." M." w., b.(M.)w. , b..**M** w. Once more B"M"W.....much better than BNW.

nice mod but your link wont post to australia some one on ebay listed them but they want $28 in postage

Do I really need that two white things and the bolts? I can only find that two black plastic things on eBay.

E39 is pinch design, not pass thru. 😢

the video helps thank you but he talks too much 😠