Thank you so much you absolutely saved my grade! I could not get my ESP32 to connect no matter what I tried and this was the only video that went in depth enough to help me solve the problem.
@BINARYUPDATES Жыл бұрын
Hi Lena, I'm glad to know finally you can program your ESP32 Development Board. I'll be posting more videos about ESP32 programming and projects. Thanks for your wonderful words. Good luck and best wishes!
@jwmcneelyIII8 ай бұрын
This is very helpful. It sure would be nice if you would copy those urls and paste them into the description so we could copy and paste them instead of trying to read them in the video stream. The resolution is not so great.
@johnyeap713327 күн бұрын
go to the website at 1:54
@mananjarsania93285 ай бұрын
Super. Explained from scratch. Thanks.😊
@BINARYUPDATES8 күн бұрын
Glad you liked it
@AlexFreemanOfficial2 ай бұрын
Thanks for the video. Very simple, concise and clear. Helped me a lot. 🙌🙏
@BINARYUPDATES2 ай бұрын
Hi Alex, I'm glad it helped!
@iCore7Gaming6 ай бұрын
good one, but you missed a huge part about installing the driver for the USB chip. only took me 10 mins to fix that but all good.
@sarath65353 ай бұрын
Very nicely explained, appreciate your effort to sharing the Knowledge.
@BINARYUPDATES3 ай бұрын
Hi Sarath, thank you so much!
@masidurrahaman22967 ай бұрын
Where is the link??
@jabaljoshi7343Ай бұрын
Very Nice tutorial, Explain everything
@BINARYUPDATES14 күн бұрын
Hi Jabal, Glad you liked it!
@nickmosca334611 ай бұрын
It does not show my port I have just purchased a new esp32
@BINARYUPDATES11 ай бұрын
Hi Nick, please check drivers are installed properly. Usually, ESP32 comes with CP2102 USB driver chips from Silicon labs. Once you install drivers and use quality Micro USB Cable then you'll find COM port number in device manager. Good luck and best wishes!
@MultiJohnny91Ай бұрын
download drivers first
@ajriyaluthfi87203 ай бұрын
thank you sir🙏, u saving my life
@baresaint4 ай бұрын
So good! Thanks. You helped me a lot.
@BINARYUPDATES4 ай бұрын
Hi Baresaint, Glad to hear it!
@theanoopk3 ай бұрын
Well explained with clear point for beginners. For me ledPin = 2 was not working. I have lookup the circuit layout of D2 pin. It was 9. It started working.
@BINARYUPDATES3 ай бұрын
Great, I'm happy to know you've successfully programmed ESP32 Dev Kit. I'll be adding more videos to ESP32 programming playlist. Hope you'll enjoy. Best wishes!
@Bu7aamed199 Жыл бұрын
Thank you very much for this tutorial !
@BINARYUPDATES Жыл бұрын
Hi Aamed, Glad it was helpful! Hope I'll get time this year to make more videos on ESP32 Microcontroller programming. Wish you good luck and best wishes!
@JusSingh6 ай бұрын
i got i working for first time lol. i watched other tutorial they are asking to connect resistors(hell of connections to do) and that never worked. as beginner, this is straight forward no complicated connections. its like my first python code(print("Hello world")) Thank you soooo much.
@akankshyapattanayak8497 Жыл бұрын
Thanks bro !! So much for this vedio.
@alireza09945 ай бұрын
Thanks brother. it helped me a lot. ♥♥
@BINARYUPDATES5 ай бұрын
Glad to hear that this ESP32 Programming lesson was useful to you. Best wishes!
@herebest46122 ай бұрын
Thanks thalaiva
@ritu369616 күн бұрын
I am having error while compiling it says, warning ('sound' is not categorised esp i2s it is set to uncategorised)' similarly warning with 'sensor''
@HollyHertig2 ай бұрын
very nice!
@mariapaulajimenezjaramillo9210 Жыл бұрын
I really like your video, thank you so much, I will check your others videos! :)
@BINARYUPDATES Жыл бұрын
Hi Maria, Glad you like them Best wishes!
@andre.ramos.12342 ай бұрын
thank you
@BINARYUPDATES2 ай бұрын
Hi Andre, You're welcome!
@PhilemonelectronicsАй бұрын
1:50 can find the link you are talking about
@gayanchathuranga85988 ай бұрын
esp32 wroom , error compiling to board . Which board should i select? I selected wroom development
@BINARYUPDATES8 ай бұрын
Hi, Select "ESP32 Dev Module" as a board under Tools section of top menu bar in Arduino IDE. I hope this may help. Best wishes!
@edgarlepiten2883 Жыл бұрын
Thanks for the tutorial. Was wondering if you have a video having an input pin configured and an output as well. Like for an example, if you press a button, LED will turn on.
@BINARYUPDATES Жыл бұрын
I'll surely making Switch as an input and LED as an output. So that LED will be controlled from button switch connected to ESP8266 NodeMCU. Thanks for suggestions!
@edgarlepiten2883 Жыл бұрын
@@BINARYUPDATES thank you for noticing my comment. Looking forward to your video..
@tahayaseen10209 ай бұрын
where is the link to download esep32
@Trippytimo9 ай бұрын
hey whats that white board with holes called? Please answer
@smxrcm10799 ай бұрын
breadboard
@Shash_Lyricals-zx3ki5 ай бұрын
bro mine esp32 board is of type ch9102x driver, it's not showing port in the arduino ide...please help me out
@Adhil_.Muhammad Жыл бұрын
Bro i have issue after uploading there is no light blinking in led application and when serial monitor it is show so many command like spi flas boot like
@BINARYUPDATES Жыл бұрын
Hi Adhil, it seems to me your ESP32 Microcontroller is not been programmed properly. May it has some issue with flash. Try to press and hold Flash button for 10 second and again reupload the code and see if it works. I hope you may find this useful. Good luck and best wishes!
@Adhil_.Muhammad Жыл бұрын
@@BINARYUPDATES bro that is not issue I solved out when I select board node mcu 32 s instead of esp32 board in board manager
@madtin2 ай бұрын
Hello, is it normal if the led stops blinking after 5 seconds with this code? :S
@BINARYUPDATES2 ай бұрын
Hi Madtin, usually only at the time of esp32 programming happening the LED keep flickering. Blut once the programming is done then LED blinks as per delay in the code. I hope this answers the question. Good luck and best wishes!
@rakeshraiger199924 күн бұрын
thanks sir
@BINARYUPDATES15 күн бұрын
Hi Rakesh, welcome!
@keerthu37410 ай бұрын
Can i do these processor for esp-32 wroom -32D
@BINARYUPDATES10 ай бұрын
Hi Keerthu, yes it will work with ESP32 WROOM 32D module as well. Good luck and best wishes!
@SHIVAMG5438 ай бұрын
UsbEndpoint[mAddress=2,mAttributes=2,mMaxPacketSize=32,mInterval=0. Problem 😢😢
@tareshgupta10956 ай бұрын
the voltage out of usb ports are 5v , is it safe to connect esp32 with it ? wouldnt it damage the esp32 ??
@BINARYUPDATES6 ай бұрын
Yes, its safe to connect ESP32 board using USB port because its had LDO on the board as a voltage regulator.
@qwertywil6 ай бұрын
3:34 I have problems failing to install the esp32 board manager, is there alternative methods to install esp32 manager?
@eliasalahmar37714 ай бұрын
have you solved the problem? i am facing the same issue
@Halal_broh3 ай бұрын
this program is alread head into its example its a not complete video as per caption mentioned, i want to know that how i can upload my own program in Aruduino????????????
@cgyh687487 ай бұрын
helped me
@BINARYUPDATES7 ай бұрын
I'm glad you find this ESP32 tutorial useful. Thank you!
@axriticmusic34738 ай бұрын
Help me... After uploading wifi code in ESP32, it shows symbolic language in monitor settings.... Help me
@BINARYUPDATES8 ай бұрын
Please make sure the serial baud rate is properly setup in ESP32 code as well as in Serial monitor of Arduino. Also, make sure SSID and password is correctly mentioned in code without any typo mistake. I hope this may help. Good luck and best wishes!
@iddddd900 Жыл бұрын
hello , why there's no port shown ??😢
@BINARYUPDATES Жыл бұрын
Its because you need to install drivers for ESP32 Module in your laptop. Also make sure to use quality USB cable while connecting to PC. I've dedicated video to fic driver issue for NodeMCU on my channel which may be useful to resolve this issue. Good luck and best wishes!
@aryanreddybanda303010 ай бұрын
bro I can't find the the second url link anywhere
@mulukyushamdi25008 ай бұрын
Hello im just programing my esp32 but always says sketch uses 237109 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variable use 21048 bytes (6%) of dynamic memory, leaving 306632 bytes for local variables. Maximum is 327680, how to fix it
@darokahn10255 ай бұрын
This is not an error, just info. It's giving you some stats on your code and how much memory it uses on the board.
@mulukyushamdi25005 ай бұрын
@@darokahn1025 yeah i just forgot to transfer to my esp LOL.
@kanikaadhikari67478 ай бұрын
I am a Mac M1 user. I already installed the boards and port but Please tell me how to install the esp32 driver. I face "Failed uploading: uploading error: exit status 2" this issue. Please tell me how can I fix this
@BINARYUPDATES8 ай бұрын
Hi Kanika, just search for "download CP2102 drivers for Mac M1". And you'll find download link online. Most of ESP32 board uses CP2102 as a USB to TTL converter chip. So installing drivers for this chip will let your device detect by laptop. I'm not frequent user of MAC but I'm sure this may help you. Good luck and best wishes!
@kanikaadhikari67478 ай бұрын
@@BINARYUPDATES Thanks sir. Sir another problem i am facing is that the serial monitor is displaying only the special characters. If i want to display a normal comment, its not working. I chane the baund 9600, and try others but still not working.
@akarshgupta2586 Жыл бұрын
My laptop isnt able to detect the board. It is a new esp32.
@akarshgupta2586 Жыл бұрын
There is no new COM port showing. Is it the usb cable?
@BINARYUPDATES Жыл бұрын
Hi Akarsh, it possible. Try good quality USB cable between your ESP32 board and laptop. Also make sure, drivers are installed properly. I have made separate video on the same. Good luck and best wishes!
@Harshavardhan15970 Жыл бұрын
I think surviving in software engineer is little bit easier than core field 😭 share your thoughts bro
@BINARYUPDATES Жыл бұрын
Hi Coolbro, its difficult to say as it depends on person to person. But career is more stable in core especially embedded software, in case if you're working in product base company. This is just my personal opinion. Best wishes!
@Harshavardhan15970 Жыл бұрын
@@BINARYUPDATES I have 6yrs careergap, I m from ece background, some of the institutes in bangalore claim definetly you will get placed as fresher we provide 100% placements and knowledge is imp than gap, will companies hire careergap candidates if knowledge is good? Share ur honest feedback
@SHIVAMG5438 ай бұрын
Please help 😢😢UsbEndpoint[mAddress=2,mAttributes=2,mMaxPacketSize=32,mInterval=0
@anandindnr4 ай бұрын
Hello Thanks for the video and it was very helpful Three additions from me 1. Use a good USB cable or the WROOM32 may not get detected 2. Use the correct USB driver for your board - mine was Silabs CP2102 hence installed the latest universal driver from SILABS site here 3. I did not require to press the Boot button for making it work in write mode Thanks again Note - I could not add links to the download as Google for some reason blocks it
@BINARYUPDATES4 ай бұрын
Hi Anand, thank you so much for adding more points. Best wishes!
@ironik20125 ай бұрын
i cant select port help me
@jeremiaskotchinski20734 ай бұрын
There are cables where only the power line is plugged in (Charge only) Are you sure yours is a data cable?
@anishstechlab73239 ай бұрын
sir URL link please?
@user-cg9qt8lf9i8 ай бұрын
bro for me it's not showing the port
@BINARYUPDATES7 ай бұрын
Please make sure the cable you're using is quality and support data and power both. Also make sure if drivers are installed properly. I hope this may help. Good luck and best wishes!
@amaladhas712926 күн бұрын
❤
@lgilson91 Жыл бұрын
Does this work for all esp32 variants
@BINARYUPDATES Жыл бұрын
Yes, it does work with most ESP32 variants in market Best wishes!