How to "bind" with the spektrum radio control system ( "Orange" clone used )
Пікірлер: 22
@tazztt113 жыл бұрын
THANK YOU SIR! Greetings from USA. I lost my factory bind in the rebuild of an Aert Tech P-51 Mustang foamie with the E-Fly 2.4ghz radio. Using your tutorial, I was able to re-bind and now working perfectly. Props, and thanks again!
@gcshawkey8 жыл бұрын
Think of the bind plug as a switch - its a simple loop of cable which connects the two outer pins of the battery/bind socket together. One of those is normally a "signal" pin ( white yellow or orange on your servo leads ) which carries the signal pulse from the radio to a servo. On the receiever's battery / bind socket, this signal pin is redundant so the spare pin is connected internally to a "switch" in the receivers circuitry that puts the rx into bind mode when connected via the bind plug to ground.
@dand31811 жыл бұрын
Thanks Mate, just the refresher I needed! Same Tx & Rx, worked perfectly the first time. No off to the flight line with my new plane!
@BALLiNAiNTEz11 жыл бұрын
cheers for this video i spent an hour reading useless instructions and this 2 minute video described everything in much better detail. Finally moved to 2.4 with a spektrum dx8 :D
@FrostbiteUK13 жыл бұрын
This is better than the Spektrum manual
@ferrazberchol91815 жыл бұрын
Congractulatios. Very usefull to me. Now get the Translator Google to portuguese kkkkkkkkkkk.. Parabéns sua informação foi muito útil para mim. Muito obrigado. Aqui do Brasil.
@gubber12345613 жыл бұрын
very helpful mate.cheers
@gcshawkey11 жыл бұрын
Yup, just a simple loop from the two outside pins of a standard servo plug.
@Judge_Judy12 жыл бұрын
excellent walk through
@gcshawkey10 жыл бұрын
You may have faulty receiver, trythe exact same thing with another unit and if that is okay then the unit is okay and should be returned to horizon hobbies who will almost certainly exchange it . I have always found them excellent on customer service and after sales :) Hope that helps
@Mariz65010 жыл бұрын
I'm having trouble on binding an GR300 rx with my DX5e. It flashs quickly, i do the binding sequence on the tx, it starts flashing slowly and then out and i cant get a steady led light.
@ZoomBlue999 жыл бұрын
Thank you, thank you, thank you.
@gcshawkey11 жыл бұрын
You're welcome - glad it was helpful :-)
@gcshawkey11 жыл бұрын
Cool - glad to help.
@wildbsc11 жыл бұрын
Great vid thanks. Can you confirm this rx is NOT compatable with a Futaba T7C please. Regards Will
@eastcoast7813 жыл бұрын
after its bind'ed, i thought always took the Bind plug out.then powered down RX and then radio. Take out bind plug.,Turn on TX,then power RX? It always works for me!!! Or is it wrong? Didn't think you could shut down your radio while power is still on the RX? . O r does it matter when you in bind mode?
@ultrakool8 жыл бұрын
what does the bind plug do? I mean, why is there a need to plug it in the battery receptacle? jus'curious
@zyxelina13 жыл бұрын
Hello. My light on my receiver does not enter bind mode when i attach the bind plug.. it stays solid whatever I do. whats wrong?
@guynexdoor13 жыл бұрын
The spectrum rx doesn't flash when I plug it in! What is going wrong?
@gcshawkey11 жыл бұрын
Ur welcome ;-)
@TheRctest12 жыл бұрын
is your transmitter dsmx or dsm2 or that you give them a menu may change to dsmx/dsm2
@gcshawkey11 жыл бұрын
I dont use Fuby stuff, so cant confirm this sorry - Im sure they use a different system, maybe someone else can comment?