Thank you for the comment. I have not thought about it, but I like your plan.

images.app.goo.gl/rUrquf9v1uJEsaue9

This is the basic plan I used, but I did change it a bit to be able to use the wood I had on hand.

This is an open source design which must be credited. Your viewers can see the original design here: www.realseeds.co.uk/seedcleaner.html and they can see the open source agreement here: creativecommons.org/licenses/by-nc-sa/3.0/

Got it not to worry TX. This will help a lot to clean my pigeon feed

Super. I must be honest. You won't regret it.

Thank you Jaco. Best wishes and all the best for 2021

I think you would be able to use it. Maybe just throttle the vac more or less? Let me know how it goes.

@@JacoBadenhorst I was worried about the power of my shop vac. I could make a flap to reduce the size of the vacuum intake?

@@barretmcdermid1840 yes, or even a 1/4 turn ball valve could work.

Thanx. For the comment. I think the internal width was 76mm (3"). That will make the overall width 4". I will check tonight and let you know.

@@JacoBadenhorst all good no panic.

should of said my vacuum has 7 setting low to high but will only drop the seed out of the clean tube, any ideas how to solve that

I just want to make sure I understand. So the seed falls straight through without any cleaning happening, as the oats is to heavy?

@@JacoBadenhorst No the oats are light, I can try the speeds 1-7 it makes no difference straight though the clean out let. Tried closing the gap in the throat with a piece of plywood same result . Sent a email to the Realseeds Uk telling then the problem just told me I may have to use a seive

Jaco I have just built a new cabinet and put more time and effort in to getting the correct sizes and now it cleans the oats

I did not think it would be that sensitive! My first thought was that the feed section was to large. I also noticed that the vent makes a big difference between fully open and fully closed.