Bitfenix Nova Mesh TG SE - PC Timelapse Build

Рет қаралды 30,691

3 жыл бұрын

In this video I made a build in the Bitfenix Nova Mesh TG SE ARGB White.
➤Leave a sub and like if you liked this video! :)
Parts Used:
➤CASE: Bitfenix Nova Mesh TG SE ARGB White (sponsored)
➤CPU: AMD Ryzen 7 2700X
➤GPU: AMD RX 580 8GB
➤RAM: 32GB (4x8GB) G.Skill TridentZ 3000MHz
➤COOLER: DeepCool Castle 240EX White (sponsored)
➤FANS: 4 x 120mm Bitfenix included, 2 x 120mm DeepCool Included (sponsored)
➤STORAGE: 1 x 1TB Samsung 970 Evo
➤PSU: CoolerMaster MWE650 White
Music used:
➤ Lakey Inspired - Distant
➤ Lakey Inspired - Chill Day
➤ Lakey Inspired - I Found Me

Пікірлер: 43

@franceschik1 2 жыл бұрын

I wished for a shot of the cable management behind

@AND1TFC 3 жыл бұрын

I was wondering if a liquid cooling would fit this case, thnks for the video my dude.

@amazedsetups4650 3 жыл бұрын

Hi, I've used a 240mm aio on top of the case, for the front I don't know probably a 360 but you have to have a short GPU because my GPU almost hit the front mesh, but I have a really big GPU. I would search on internet for other people that have done that to know how long your GPU can be. Thank you! :D

@-fnz-bourrito-fr Жыл бұрын

Good video

@UltraGameWorld 3 жыл бұрын

Good Video and nice build!

@amazedsetups4650 3 жыл бұрын

Tank you bro!

@vojtechklecak8673 Жыл бұрын

No Thermal paste needed??

@mxdom Жыл бұрын

Where does the GDV wire on the 6+6 fan hub plug in to?

@ABDULLAH-tj7op 9 ай бұрын

How to remove the front cover to replace the fans plz

@aidyns3703 2 жыл бұрын

Where do the plugs form the case itself go on the mb I’m new to pcs n this is the case I got for my first, but I can’t figure out why it doesn’t have a cable for the f_usb1 pins on my mb, is it routed through one of the 3 different separations of cords on the case bc it have them all plugged in

@paulmiller3467 7 ай бұрын

Cable management detail and if you were able to successfully get software lighting control working would be helpful

@BaserinoTV 8 ай бұрын

I really wonder did u manage screw all screws on radiator on top i can see only one side screw holes cuz i cant go deeper cuz of rams

@TheOneAndOnlyKevin Жыл бұрын

Where do I change the fan modes ?

@monerolara2424 2 жыл бұрын

Can you do a video showing us how you connect the led lights of the fans because I have the same case and I don’t know how to connects em lights please

@YPX234 2 жыл бұрын

Hey have you figured out how to connect the fan lights?

@shylnn Жыл бұрын

Is this setup hood for video editing and gaming ?

@dariosucevac7623 Жыл бұрын

I have the same case with 4 fans and Im trying to change my fan speed in the BIOS, but it says it has an RPM of 0 and I have tried to do it with SpeedFan but it doesnt recognize my fans, and I can not change the speed any help perhaps? The fans are all hooked up to the included controller and the controller is to the mobo.

@paulmiller3467 7 ай бұрын

My MSI MB actually changes the fan speed I discovered... the controller/fans just don't report the RPM to the system (and aren't designed to). If you want to know rpm you'll have to get fans that have that feature

@dariosucevac7623 7 ай бұрын

@@paulmiller3467 i mean the temps are very good just the idle sound could be lower but okay its tolerable

@summrsxo 3 жыл бұрын

I have the same motherboard (Asus B450-f gaming) and my board doesn’t have an argh header, so how did ur fans work?

@amazedsetups4650 3 жыл бұрын

Hi, I used the included ARGB controller to control the RGB. You can change the effect by pressing the reset button on the case

@Graphics_Card 3 жыл бұрын

It should have like a rainbow Symbol saying aura sync. If not, then it isn’t supported.

@bisbidesign 2 жыл бұрын

Hi, I have a CORSAIR Vengeance RGB RS RAM memory and a 240 AIO (Cooler master ml240 ARGB), my question is, can I install the AIO in the upper part of this chassis without having space problems with the Ram memories? Thanks.

@andhealm06 Ай бұрын

I have the same problem but I think whit smallest rams why can make it

@perx7839 Жыл бұрын

if you buy the case that comes with 4 fans is it just the fans sepretaly?

@user-ll3kv5jq5v Жыл бұрын

I've just ordered it from a site saying it has all 4 fans installed. From my quick search, I think there are at least 4 SKUs which means they come with different fan config. Do your research, call the shop, etc, because earlier I was gonna order a bit cheaper one which had only 2 fans.

@Franpel 3 жыл бұрын

What type of screwl used? Tornillo in the motherboard

@amazedsetups4650 2 жыл бұрын

The one's you use for mounting SSD's

@adanpacheco4185 3 жыл бұрын

If i have delta t-force rams, my AIO 240mm will fit on the top ?

@amazedsetups4650 2 жыл бұрын

I don't know unfortunately :(

@andhealm06 Ай бұрын

No doesn't fit I have that problem

@noahstewart8054 Жыл бұрын

Did you just break off the pieces that your gpu slot is? Or is there a screw I couldn’t figure it out on mine?

@vplx8274 21 күн бұрын

yes you break the slot off

@yizhang1847 2 жыл бұрын

240mm AIO won't fit on top with mAtx board, will collide with ram stick, I assume only Atx board will work with 240mm AIO on top

@yizhang1847 2 жыл бұрын

Very disappointed

@redfawx.8627 2 жыл бұрын

I had the same problem, although it was with the BitFenix Nova Mesh TG (non SE) and an ATX motherboard. I think BitFenix is just a very cheap company, and I won’t be buying from them again.

@shoowbandolera1163 11 ай бұрын

how many cm is the video card?

@djdudegaming8502 10 сағат бұрын

a bit late, but the gpu length is 298 mm

@makas61sd60 3 жыл бұрын

Gpu size ?

@amazedsetups4650 3 жыл бұрын

298mm

@sahir4305 3 жыл бұрын

Are the fans loud?

@amazedsetups4650 3 жыл бұрын

I didn't really notice it that much, but if you want you can control the fan speed with the build in fan controller and connect that to your motherboard.

@dariosucevac7623 Жыл бұрын

@@amazedsetups4650 I have the same case with 4 fans and Im trying to change my fan speed in the BIOS, but it says it has an RPM of 0 and I have tried to do it with SpeedFan but it doesnt recognize my fans, and I can not change the speed any help perhaps? The fans are all hooked up to the included controller and the controller is to the mobo.