Black,silver,pearl and broken glass resin geode coasters ❤ video #30

Рет қаралды 74,467

4 жыл бұрын

The product's I used in this coaster set are
Enviro tec lite resin 2 part epoxy
Artist Loft Black
Artist Loft Silver
Ashland Decorative Filler aka Broken glass
Recollection fine glitter black
Recollection fine glitter BLING
Black pearl mica powder
Silver mica powder
Geode silicone silicone mold

Пікірлер: 149

@BoojiePanda 4 жыл бұрын

Awe bummer.... really wanted to see the finished product.

@SherryMoulton 4 жыл бұрын

Sorry the next video #31 has the finished coasters .... This was done before I knew how to combine my videos. Thanks so much for watching 🥰

@janiegoodman6301 2 жыл бұрын

That is fabulous

@cindyre85 4 жыл бұрын

Beautiful 👍👍👍 I am going to try sea glass in my coasters. Thank you for the idea 💡

@SherryMoulton 4 жыл бұрын

Thanks you soooo much. I would love to see yours when you're done 😍

@mountaingirlart7014 4 жыл бұрын

The coasters are gorgeous! Great job!

@SherryMoulton 4 жыл бұрын

Thanks 😍

@janepowell1267 4 жыл бұрын

I love these coasters they really are beautiful.. 🌼

@SherryMoulton 4 жыл бұрын

Thanks so much ❤

@Roxy4utube 4 жыл бұрын

Hi Sherry! These look like they turned out gorgeous! I have many paints & pigments and I just bought the same silicone mold and am eager to try this! Just need to "buy" more stuff! LOL! 💲💸💰 🙄 Started acrylic pouring in August and have been obsessed with it; want to do some alcohol ink designs too! Oh my! Not enough time in the day or money in pocket!😪 Thank you so much for this demonstration! Keep well! 🐇💕

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching 🥰 I love this mold so much that I got 2 more lol . I'm lucky that I'm at the stage in my life that I have the time and money lol I joke that I work to pay for my supplies 🤣 Stay safe and happy creating 🥰

@SachinKumar-ei9wg Жыл бұрын

@Sooz3112 4 жыл бұрын

Beautiful - love them! I'm going to check out the next video x

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching 😍😍😍🇨🇦

@linaferlazzo2052 4 жыл бұрын

Beautiful must try this combo as I have the same mold. Thanks from Melbourne, Australia.

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

@connieward7670 3 жыл бұрын

Love the glitz!! Keep em coming! Beautiful!!

@SherryMoulton 3 жыл бұрын

Thanks so much and thanks for watching 🥰🥰🥰🥰🇨🇦

@judyortmeier4479 4 жыл бұрын

Beautiful!

@SherryMoulton 4 жыл бұрын

Thanks you 🥰

@katiewagner8787 3 жыл бұрын

This is beyond gorgeous 😍

@SherryMoulton 3 жыл бұрын

Thanks so much and thanks for watching 😍😍😍🇨🇦

@mermaidswhimsy8601 2 жыл бұрын

Beautiful I hope you sell those....you will make a fortune!

@deenenriquezresinph 4 жыл бұрын

That's really beautiful!😊

@SherryMoulton 4 жыл бұрын

Thanks sooooo much 😍

@wimpy1267 4 жыл бұрын

Gorgeous!!

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

@liletteautrey8481 4 жыл бұрын

It is stunning

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching 🥰🇨🇦

@sherricaldreon5623 4 жыл бұрын

Love this idea ❤️😘

@sherrislife2046 4 жыл бұрын

Awesome process!

@SherryMoulton 4 жыл бұрын

Thanks so much 😍 thanks for watching ❤❤❤

@tellkittle4681 3 жыл бұрын

Love it!!!

@fatmabilir5000 4 жыл бұрын

So amazing 🙈🙈

@SherryMoulton 4 жыл бұрын

Thanks sooooo much 😍

@lrhardwick 4 жыл бұрын

Lovely!

@SherryMoulton 4 жыл бұрын

Thanks sooooo much 😍

@joallawestervelt6918 4 жыл бұрын

Gorgeous

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

@rika-resin7974 4 жыл бұрын

I love the result!!! I want that mold!! 😂

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching I have these mold in both my Amazon shops. Canadian www.amazon.ca/shop/sherrymoulton USA www.amazon.com/shop/sherrymoulton 🥰🥰🥰🇨🇦

@rika-resin7974 4 жыл бұрын

thank you

@blys2pay 4 жыл бұрын

Pretty

@SherryMoulton 4 жыл бұрын

Thanks soooo much 😍

@lindsayslovelycreations320 3 жыл бұрын

OMG I want some of these!!

@shrondajackson4615 4 жыл бұрын

Awesome

@SherryMoulton 4 жыл бұрын

Thanks so much and thanks for watching 🥰

@corinnewolmarans2358 Жыл бұрын

Hi Sherry Your coasters are absolutely stunning! Could you please add the links to products used in this video? Thank you

@domimassou5457 4 жыл бұрын

Very lovely

@SherryMoulton 4 жыл бұрын

Thanks so much and thanks for watching. 😍😍😍🇨🇦

@lordewi7812 4 жыл бұрын

I’m a resin artist and this is so dangerous! Your coffee is near the resin! The resin has dangerous fumes! I wear a respirator and I do everything in a special room.

@anarres1400 3 жыл бұрын

Np she is American eat cancer everyday with burgers or other stuff fumes ar less dangerous

@sherylward7377 4 жыл бұрын

Wooza🙋‍♀️🤗🥰❤️❤️❤️

@sherriwagner1483 4 жыл бұрын

I would have liked to seethe finished project and for you to Demond it. It’s sooooo pretty

@SherryMoulton 4 жыл бұрын

Thanks so much for watching and I'm sorry I'm trying to learn how to put 2 videos together sorry. I do try to put it in the next video.

@SherryMoulton 4 жыл бұрын

Thanks sooooo much for watching I'm sorry I dont know how to put 2 videos together I'm trying to learn how . Now I do usually put it in my next video. ❤

@mountaingirlart7014 4 жыл бұрын

@@SherryMoulton what video editor do you use?

@SherryMoulton 4 жыл бұрын

@@mountaingirlart7014 I don't not sure what to you my son was down to help me but was sick so I still didn't get it ...... do you have any suggestions.

@mountaingirlart7014 4 жыл бұрын

@@SherryMoulton you can download movie make for Windows for free. It's very easy to use! It's what I started with. At the end of your 1st video, you just click on add video and add how ever many videos you want. There are other great free editors out there, but depending on your computer, they take a lot of time to process the video. But give you more advance editing options.

@haleemahnaguib1115 4 жыл бұрын

love the coasters really nice and black and gray,its leema's 8 year old girl,!

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

@tasst2674 4 жыл бұрын

Hi Sherry, lovely as usual. Quick question, would perfect pearls be considered mica? I think so, but wanted to see if you knew. Many thanks. On to video 31!

@SherryMoulton 4 жыл бұрын

I just googled it and yes it's a mica power. Thanks so much and thanks for watching 😍😍😍🇨🇦

@VICKY-dk3bh 3 жыл бұрын

Hi, what you do is great ! If I make/create a plate that I don't like, can I modify it ?How can I modify a resin plate ? = put it in the microwave to melt it? In hot water? Or with a paint stripper? Thank you so much.

@bonitablackburn5365 4 жыл бұрын

P.S.S. If the resin sticks to your mold freeze the whole thing for a few minutes.🤣 I'm done now!🤣

@SherryMoulton 4 жыл бұрын

Lol thanks I'm always up for advice so dont stop 🤣🥰

@s.714 Жыл бұрын

I just ran into this video from years ago. Soooo Gorgeous ❣️ Just one problem for me.... I can't seem to find the reveal video. 😔

@bonitablackburn5365 4 жыл бұрын

P.S. Getting hot means it going to seize on you real fast. KSRESIN does not get hot like that. I have actually pushed KS 1 hr and 15 minutes. I'm not an affiliate for KS but they are looking for affiliates. Good luck, looking real good.

@SherryMoulton 4 жыл бұрын

Thanks soooo much I will have to look into that 🥰

@arlenedyne6032 4 жыл бұрын

Can you perhaps tell me why my resin heated up after adding alcohol ink

@sanybooshehri3497 4 жыл бұрын

👌🏻

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching 🥰

@KraftyCdn 3 жыл бұрын

beautiful coasters... can you include the links to the products you use i would love to know the link to the mold itself if possible .. thanks ;)

@StephanieGagos 4 жыл бұрын

great video, where did you get the mold from?

@SherryMoulton 4 жыл бұрын

Thanks you I feel bad wish it was 10.00 Canadian.

@misslemonsherbet 4 жыл бұрын

How do you measure out how much resin you would need ?can someone explain this to me please as I am just starting out :)

@SherryMoulton 4 жыл бұрын

Thanks so much for watching 🥰 When I start a project I will measure the mold now this one I poured 1 oz of water in the mold so because there are 4 compartments I did 4 oz hope this helped ok so then my resin is 1 to 1 ratio so I mixed 2 oz of part 1 and then 2 oz of part 2 so that i finished with a total of 4oz. 🥰🇨🇦

@allnightercrap 4 жыл бұрын

I love these! New subscriber here. Can you tell us what part resin you used? Do you still do 1:1 parts of hardener and resin or 2 parts resin and 1 part hardener? Would love to know. Btw I love your voice!!! 🥰

@SherryMoulton 4 жыл бұрын

Thanks so much and thank for watching 🥰 now every resin is different most ore a 1 to 1 ratio. Your lable should tell you what the ratio is. Thanks so much 🥰🥰🥰🥰🇨🇦

@allnightercrap 4 жыл бұрын

Sherry Moulton i use art resin and it’s also 1 to 1 ratio but i thought it would be a different ratio when making coasters. I use my resin for wood panels or canvases. Since you used 1 to 1 ratio, is it hard enough for coasters? Is it heat proof also?

@SherryMoulton 4 жыл бұрын

Yes it should mine are a little soft when I first unmold them. But the harder up in 24hr .

@allnightercrap 4 жыл бұрын

Sherry Moulton I just tried making coasters with art resin and in 24 hours, it’s still slightly bendable. Are yours like that too? I’m not sure if mine are heat resistant enough for coasters but wanted to give it a try 😂

@victoriatiller7841 4 жыл бұрын

Can i use any acrylic paint or do i have to use a certain type?

@irisi.9018 4 жыл бұрын

Thank you for sharing. But why you didn't show the final result? I feel a bit dissapointed after long waiting to see the back side of coasters at the end, but you stopped😁

@SherryMoulton 4 жыл бұрын

It's in the next video this was before I was able to combine my videos thanks so much for watching video #31

@cachejewels8532 4 жыл бұрын

Read your resin. It will probably say not to have your drink around resin. Please be safe.

@SherryMoulton 4 жыл бұрын

Thanks will have to remember not to ... yes safety first 😍

@EmilyMineDesigns 4 жыл бұрын

Her drink is fine.

@nadinejames6216 4 жыл бұрын

Hi do your coasters come out hard or flexible?

@SherryMoulton 4 жыл бұрын

Thanks for watching 😍 Yes the do and then I lay then on a flat surface for a day or so 😍

@claudiaross3817 4 жыл бұрын

It's gorgeous!! Where did you get the mold from, and the glass pieces?

@SherryMoulton 4 жыл бұрын

Thanks for watching ❤ I got the mold for the geode coasters from wish.

@apdapainter11 3 жыл бұрын

Love it! Did you mix part 1 & 2 of the Epoxy

@SherryMoulton 3 жыл бұрын

Thanks so much and thanks for watching. Yes there is hardner and resin and they are mixed one to one.

@apdapainter11 3 жыл бұрын

Thank you so much!!

@elsimerino419 4 жыл бұрын

Were do u buy the glass resin

@roaa8161 4 жыл бұрын

When I made my own coster the resin runaway,How u make the resin stay where u casting??

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks for watching. Now if you let your resin rest for a bit so it thinks up it will stay. But resin has a mind of it's own. 🥰🥰🥰🇨🇦

@lisagilbert7576 4 жыл бұрын

Can you put a hot cup of tea on this resin coaster

@SherryMoulton 4 жыл бұрын

Yes you can. Thanks so much for watching 🥰🥰🥰🇨🇦

@janiegoodman6301 2 жыл бұрын

Good mornings

@joycegossett9981 3 жыл бұрын

Never got to see the finished silver and black one. Number is that

@jennibaker96 4 жыл бұрын

How much resin did u use for the whole thing please?? X

@SherryMoulton 4 жыл бұрын

Thanks for watching 🥰 I mixed up 4ozs for these coasters.

@jennibaker96 4 жыл бұрын

@@SherryMoulton thank you so much, having my first go next week, so I'm excited lol x

@SherryMoulton 4 жыл бұрын

Good luck 🥰

@jennibaker96 4 жыл бұрын

@@SherryMoulton thank you x

@theirishcailin333 4 жыл бұрын

@@jennibaker96 dying to try resin. How did yours turn out?

@conniegreeno750 Жыл бұрын

If. You. Don't. Heat. Gun. What. Can. You. Use

@SherryMoulton Жыл бұрын

Thanks so much and thanks for watching. I would use 99% isopropyl alcohol in a spray bottle.

@ioniataylor4790 2 жыл бұрын

where did you buy mold?

@vernettaforeman669 4 жыл бұрын

Why not show the finish product once it hardens

@SherryMoulton 4 жыл бұрын

Thanks sooooo much and thanks forwatching. Yes this was before I was able to combine my videos so the revival is in the next video #31 🥰🥰🥰🇨🇦

@rosanneducharme5486 3 жыл бұрын

The coasters are beautiful! But the video is not clear at the beginning.. difficult to see the products you are using.

@SherryMoulton 3 жыл бұрын

Thanks so much and thanks for watching. These are old videos lol Now all the products are listed in the description box below the video 🥰🥰🥰🥰🥰🇨🇦

@rosanneducharme5486 3 жыл бұрын

@@SherryMoulton Does not matter if its a old video. I love the colour combo and already tried it. Luv them! Thx Sherry

@judyortmeier4479 4 жыл бұрын

Where did you order the moulds from?

@SherryMoulton 4 жыл бұрын

Thanks for watching 🥰 I got these on wish.... but I've also seen them on Amazon.

@wilmatijsma5615 2 жыл бұрын

Hello Sherry, i love your work, but i am also very concern about you not protecting yourself. I really hope you didn't drink the coffee. Please use protection, nitril gloves and a respirator at least!! And never eat or drink next to resin/epoxy. You really don't want this toxic fumes in your lungs and stomic!!! And also for the newbies, please give them the right exemple. Thank you for the demontration, it is wonderfull. Keep safe. Little love from Holland.

@Mannahsworld27 4 жыл бұрын

Wat these lil stones are called ? Can u plz tell me the name?

@SherryMoulton 4 жыл бұрын

Thanks for watching 😍 I get them at Micheals and they are called decorative filler. They are broken mirror.

@SherryMoulton 4 жыл бұрын

canada.michaels.com/en/white-crushed-glass-decorative-filler-by-ashland/10613956.html?cm_mmc=PLASearch-_-google-_-MICH_Shopping_CA_N_CatchAll_N_N_N_N-_-Generic&KPID=go_cmp-6523310328_adg-78089271573_ad-383778177991_pla-293946777986_dev-m_ext-_prd-10613956&gclid=Cj0KCQjwu6fzBRC6ARIsAJUwa2Tb9XVisPlZAtVfs7sJyiqQTxi1iVEzMz52BigYJS4AyLDDHg98C7AaAoBiEALw_wcB

@SherryMoulton 4 жыл бұрын

These are what I buy 😍

@charmin745 4 жыл бұрын

Please, please, please wear rubber gloves when touching resin. Highly toxic. Should also be wearing respirator

@SherryMoulton 4 жыл бұрын

I know I'm waiting for the respirator to come. Thanks for caring 🥰🥰🥰🇨🇦

@dianestone1229 3 жыл бұрын

where is the reveal ????

@judyortmeier4479 4 жыл бұрын

Sorry molds!

@kathysausen6493 4 жыл бұрын

The video was all blurry!

@SherryMoulton 4 жыл бұрын

Yes sorry there was some technical difficulties didn't not it was out of focus. The end result was so nice U thought I would still put it up. Thanks for watching 🥰🥰🥰🇨🇦

@ysbelbella6674 3 жыл бұрын

Didnt show the unmolding of it to see what it looks like :-/

@charmin745 4 жыл бұрын

Rubber gloves when WORKING with resin.

@SherryMoulton 4 жыл бұрын

Yes I know they get messy then intake them off forget to put on another pair. Sorry 😔🥰🥰🇨🇦 thanks for watching

@emmataylor4024 3 жыл бұрын

and a respirator!!

@khalilahharmon6303 4 жыл бұрын

Your video is blurry

@SherryMoulton 4 жыл бұрын

Sorry yes I know but the results were so good that I didn't want to not put it up ..... thanks for watching 🥰

@athenatralenberg6604 4 жыл бұрын

Would be nice if your vid was focused

@SherryMoulton 4 жыл бұрын

Thanks so much for watching 🥰 sometimes the technical stuff if out of my control sorry 🥰🇨🇦

@athenatralenberg6604 4 жыл бұрын

@@SherryMoulton no worries

@normahooks3386 3 жыл бұрын

where's your mask & gloves, umm, having coffee near where you work is like sitting in the street with cars waiting for an accident to happen.

@tammyambrose6977 4 жыл бұрын

It's not made of resin. It's paint pouring with resin on TOP.

@ladyakiraa82 4 жыл бұрын

What?? What's not? That entire set was made of resin.

@SherryMoulton 4 жыл бұрын

@@ladyakiraa82 thanks❤

@ladyakiraa82 4 жыл бұрын

@@SherryMoulton and very gorgeous. 🖤

@SherryMoulton 4 жыл бұрын

Thanks again ❤❤❤

@mountaingirlart7014 4 жыл бұрын

The paint is mixed into the resin, no more than 10% so the resin will cure correctly. If you watch more videos on working with resin, and you will understand the process better.