One of the few that functions on the range with the Springfield armory emissary.

I have a Glock 19X and a CZ P-10C. Both with the O-light PL-2 Pro. I hear the O-lights fit in the Surefire 300 holsters. ( Update. It works! W00T!! ) Basically using this for my classes, at Front Sight. Thanks for the share!

I run the same 1911 and beretta setup, im definetly looking into the omnivore. This is the exact video Ive been looking for, Thanks!

Use this for 2 gun comp, sig 320 and M9a3. Thing is a beast. I love it.

Just ordered one today. Hopefully it fits my ATI FXS-9. Great video brother 😎👌🔥

I used the quick switch kit to attach to the mid ride hanger. Bonus is I can also attach to my thigh rig or high ride belt depending on how I'm shooting. I have had no problems with the serpa and have a large collection now also all with the quick disconnect kit.

Dang didn't know I needed a flipping light or rail on my 1911

Reminds me of the Phlster Floodlight that also indexes on the weapon light. This one is kinda neat because its more than likely cheaper and it offers the level 2 retention SLS/ALS copy. I would agree, Phlster and Safariland are probably a better "duty grade" choice for a holster. Good cheap option for range toys/oddballs if you have a light preference though.

You can Add their duty drop holster, mount. The screws are different, and will need to be replaced. But it can be done!

Thanks for the great video. I love this holster. I want to swap out my holster to something with retention. Also I love both the TL1’s and the X300 lights. But I don’t see the X300 worth the premium. Both give out great lumens, durability , and sale battery life. I’d rather have more TLR lights than fewer X300’s. Both are great though.

TLR-1 lights are in very common duty use. And the 1911 in the form of the 2011 (Staccato) are resurgent in the duty realm these days.

I'm trying to find a good holster for M&P full size .40 and 9mm. I also have the TRL-1. A guy (from Parallel Defense youtube channel) made some minor changes with a Dremel and attached it to the Safariland qls mounting system.

It will work with all of your standard Blackhawk accessories.

Excellent video! You are good at this! Keep it up! I don't have one of these and have written it off but may consider it. My reasoning would be id rather attach a tlr1 I swap around so I have a holster for lots of pistols instead of sending another $110 to Blackpoint tactical or gearcraft for a pistol I may not want to keep forever. 2nd hand custom holsters lose more value than a new car.

Excellent video and demonstration. Thank for showing the fitment with the Glock 19 and TLR light noting the trigger placement within. Thank you. SUBBED :)

blade tech drop and offsets work with Blackhawk hole pattern

Well not any gun. Mine isn't on the list, however the PSA rock 5.7 doesn't have the trigger guard fully covered. A finger can get in there with the tlr-1 installed and locked in.

wow that Springfield 1911 is a thing of beauty. Very cool. What was the base model?

I got one of these holsters recently at a gun show on a trade. And I’m liking it so far. I have found it does not fit a Glock 21 other then that everything else I’ve tried has fit.

Will this fit a h&k usp 45 with a tlr-2??

In case anyone seeing this now or in the future it works off the light and i can fit my big ass FNX 45 and my p320 m17. If the gun can fit the light it can fit the gun. Pretty cool

I have the same for my p226 with TLR1-HL .. now i will change and buy the surefire x300u-a ... Is it possible this omnivore to fit also my x300u-a or i have to buy another ?

"good decent horrible" phrase used when discussing the 1911 with mods - lol. Gotta give it to him for honesty....

I like this Black hawk item. I think it holds up to patrol environment. I played around with it some years ago and it held up. The only adjustment I made was I installed the large thumb release extender (that came with it) as oppose to the shorter stock one already installed. When using this or any holster, I think you've gotta have your belt on nice and tight so that when you draw your not pulling up your belt too. In fact now that I think about it, maybe Black hawk could somehow make it bottom heavy or something. I know a lot of people frown upon this item. But it is level II retentive. Unlike Safariland, they have level II holsters with "secure" retention, so it (looks) like it's even more secured as opposed to this item. This item almost looks as if only half of your gun is protected, even with the trigger guard covered. But, I think "duty" holster is dependent on an officers skill level to defend it. I've seen training were people have had their level II Safarilands get their weapons taken from them like taking candy from a baby. I think departments who authorized old guns should discontinue them because of the upgrade hang ups like Mr2ndAmendment stated, when he spoke on the surefire lights for 92FS. Me personally, I'd rather have a more flush rail system such as what the 92A1 has. Speaking of rails, I've seen this: www.amazon.com/Recover-Tactical-System-Beretta-Pistol/dp/B00P7D3H1Y/ref=sr_1_38?dchild=1&keywords=recovery+picatinny+rail+kit+92fs&qid=1624518680&sr=8-38, set up used by a guy at the range who also had the TLR-2 laser attached and it fit like a glove. Maybe if Black hawk designed this item to look more like Safarilands 6280's or something (where it looks like it's covering more gun/top part of your gun) then perhaps departments would appreciate it's universal application more. Just my one two on it.......

So you have to run a light? And one particular light?

So what’s wrong with the Serpa??!! You didn’t explain! I happen to like the Serpa as I do have 5 Serpa holsters!! I also just bought an Omnivore for TLR1-HL because I have 2 of them!

I have seen also a backpack holster where you can fit ur AR 15 and a bazooka what im trying to say is the omnivora holster is way to big and obviously any gun is going to fit by that enormous size

I bought this holster because there’s no owb holsters with an als for the polymer 80 full size guns

Among the pistols I would like a holster for is a Glock 17L with a comp. very long pistol. Would I be able to cut the end out of this holster without wrecking the locking mechanism? Would it still have good retention?

As always, nothing for the HK P8 A1 😞

Is this holster compatible with the flashlight OLIGHT PL-2 Valkyrie in a Glock 17?

Doesnt look like it will hold close to the body for concealed. Does look like a pretty good range/field holster tho.

Do you think the jericho enhanced would fit with this using a tlr-1 hl?

little bit of help here I have a glock 22 and 23 with olight pl pro light does anyone know if this holster will fit for my set up ?? thank you

I'm gonna give it a go since Safariland let me down. They stated they do not make, nore will make a holster for my particular 1911... lame.

What light did you use again for the G19x

Doesn't that big gaping hole around the trigger guard concern anybody?

I couldn't fit a 1911 in it, did i something wrong? (Im just a beginner with weapons)

Hi Do you think this holster is sturdy enough for duty use? Having a hard time finding one for my Sar9. Thanks.

Amazon has the low mount like Police use. Just got one of these and dig it.

How do you like that Surefire MR11 for the 92fs ? I've been looking for one for my 92

will this work for an FN509 w/inforce aplc?

Does not work with the x300u-b

I have this holster but don't use it. I ended up finding a Safariland holster that fits my Beretta PX4 storm with my trl. Once I purchased it and inserted my sidearm into it.....as you can see in his video the trigger well is exposed. Major safety flaw. I could get my finger into the trigger well while it's in the holster.....Definitely not a duty weapon.

Great review, but can the holster fit a insight wx150 light on?

Hey man Omnivore eat a Inforce APL flashlight too? Thanks dude!

Still know a ton of people carrying 1911 for duty to include myself.

If Blackhawk made this safariland capable they’d win the holster market

It uses Blackhawk attachments, Blackhawk has “low ride” attachments. Also, if some neckbeard shot himself and blamed this holster would you discredit Blackhawk for that as well? Asking for a friend.

Janky!!!!! LOL!!! 🤣🤣🤣🤣🤣🤣

How about a gun WITHOUT A RAIL?

I think it would work for some duty… but for sure ALS is always better

would u recommend this for airsoft?

Standard Blackhawk stufffffff

I carry mine daily - training

5:44 Bring the pistol to your head, not your head to the pistol.