Britt gives a quick overview on how to route your video sources!
Пікірлер: 19
@josephnotter7674 жыл бұрын
Good video. I noticed the background music seems a little loud for being able to clearly follow the speaker.
@thecameraguy68834 жыл бұрын
Super helpful video! I will say the music kind of overwhelms the speaking a bit, and it makes it a little harder to listen to. But thanks for the free information!
@kizzit0o5 жыл бұрын
Hello there, can i assing 1 on input and 1, 2, 3 on the output?
@rarbiart3 жыл бұрын
It does not offer to router "one to many"? (e.g. 2 to 5, 7 and 10 at the same time)
@krishnansrinivasan830 Жыл бұрын
Nice & Thanks :)
@djbone948 ай бұрын
thanks that's helpfull because it's not really logical, the first time we use them to select destination first and source afterwards... At least it seems not logical but in fact when you think about it, it is. Unfortunately, i totally wasted an entire day of job because i didn't knew that at this period, so bad i didn't knew your channel before
@snebam3 жыл бұрын
if I add a camera at 1080p 30fps and another at 1080i 60fps, can I get a single signal and output ?? I use studio hd in 1080i and all the signals come from the smart videohub
@mediasupportgroup2761 Жыл бұрын
This is very basic router with no scaling functions. Your sources will need to match the destinations. If you had different sources with different formats, I recommend using a scaler in your signal chain to format to your desired format.
@KUGELMultimedia3 жыл бұрын
How much simultanus routings can be made? Can i route 6 ins to 6 outs?
@mediasupportgroup27613 жыл бұрын
Yes, you can actually route 20 ins to 20 outs. This device helps with flexibility and you can send the same signal out to multiple outputs simultaneously!
@corybaker132 жыл бұрын
Can you create macro functions with these buttons? So one press triggers off a group of commands when pressed? eg when button 8 is pressed every monitor connected will receive A CAM feed only
@mediasupportgroup2761 Жыл бұрын
Sorry for the late response. Acct. Issues.. Nope. No macro functions are built in. Very simple router.
@Livinwithdaniel5 жыл бұрын
In your case, are you able to send one input to the 3 different outputs? Or can you send one inputs to 1 TV output then another input to 2 different TV outputs?
@kizzit0o5 жыл бұрын
I need one signal to send to three different outputs. Example: 1 output = tv link 2 output = iptv (cabble operator) and 3 output orion tv (another cabble operatot)
@mediasupportgroup27615 жыл бұрын
You can send one input to multiple outputs.
@misaelg7093 жыл бұрын
Can an entrance exit for more than 1 exit? For example, input 1 goes out through output 1,2,3,4,5,6,7 and 8
@ifyjify23 жыл бұрын
Yes, you can send one input to multiple outputs
@lawrencefernandes6083 Жыл бұрын
Can you remove the music completely pls and reupload
@mediasupportgroup2761 Жыл бұрын
Thanks for the feedback. Yes, will look at doing that with future videos. Thanks for checking out the content.