Part 5 of the power hammer build is complete. I truly had a lot of fun making this hammer and learned a lot along the way Follow me on social media: / bccreationsrva / amakersjourney
Пікірлер: 77
@youssefel-kadri2925 жыл бұрын
Congratulations from Brazil! The best power hammer project I saw. Simple, functional and very efficient! Thank you.
@Live4Ibanez5 жыл бұрын
Awesome build series. Very nice outcome!
@johnmcclain38872 жыл бұрын
That's a nice build, works well, you might find it more stable and striking better if you tie your anvil to the pillar, to reduce harmonics. I like the way you've got your clutch set up, you've got a nice hammer frequency for fullering out. Thanks for showing!!
@jenky10445 жыл бұрын
It is very cool looking and seems to work great. I did notice you didn't seem to surface prep anything before welding and I'm not sure if the Tig welds will last long. The ones you did on the horizontal pieces by the coil spring. Anyway those stick welds you did looked the best of them between the Tig, Mig and Stick. Again, you did a great job.
@NeedItMakeIt5 жыл бұрын
Very inspiring for me, I like the size and the simplicity of the design. Well done.
@AMakersJourney5 жыл бұрын
NeedItMakeIt I appreciate the comment. thank you
@roberteverette47664 жыл бұрын
Nice little hammer! Great Job in building it!
@nomadmad3085 жыл бұрын
That thing looks awesome
@TheNuggetshooter5 жыл бұрын
Very cool indeed. I am in the process of building an anvil mounted power hammer since I hae limited space. But, it will do what I need. It is a modified Hardy Hammer - which was designed by Roy Adams. I look forward to seeing more videos of you using it. Well done!
@benhoover47623 жыл бұрын
I'd really like to get your opinion on the Roy Adams anvil mounted hammer.
@priestleyharker40465 жыл бұрын
Absolutely impressive, way beyond my level of expertise but i thoroughly enjoyed every minute of this process. Thank you very much
@AMakersJourney5 жыл бұрын
Thank you, I appreciate that. Kind words like this really motivate me to want to keep making videos
@priestleyharker40465 жыл бұрын
@@AMakersJourney definitely keep it up, you'll have a lot of subscribers soon with this incredible content
@Maetinezt5 жыл бұрын
I cannot wait to start building mine I've been waiting for so long I got a bunch of parts ready to go
@AMakersJourney5 жыл бұрын
Thanks for the comment, It took me about three years before I decided to just go ahead and make my own. I am thinking about doing a video on dimensions on the toggle arm and various parts of the machine. words of advice take your time. It took me five weeks total to collect by and make everything for this hammer
5 жыл бұрын
Nice. I have been making my own too. Size seems to be somewhat similar. I planned to fill mine with congrete. That should keep it on its place. Great work. 👍
@AMakersJourney5 жыл бұрын
I’m thinking about anchoring mine to the concrete. And also filling the main operate with sand. Thanks for the comment
@davidallison36675 жыл бұрын
Nice build. What size spring did you use?
@boonedalton62013 жыл бұрын
Im kinda modeling mine after yours, im building it now, quick lunch break... question for ya if you dont mind, i do not have as thick of a base plate as yours, curious on how its doing with the concrete... was thinkin about putting a row of 2×4 ' under mine... great idea with the single backbone, saves material... Thankyou
@AMakersJourney3 жыл бұрын
Faceplates doing just fine I just happen to get that for free it’s the only reason I used it. Machine is still up and running I used it the other day. 2x4 or 4x4 anything to take to shock. I also heard the shock absorber pads they put in stables for horses work well you can pick them up at tractor supply
@Moondog-wc4vm5 жыл бұрын
An impressive project. Strikes well, and very well built. If I was ever to do my own I would like it to strike harder with more poundage, however I am unlikely to ever have a location to work a hammer like that where it will not annoy the neighbours. I envy you your skill and your location sir!
@AMakersJourney5 жыл бұрын
Thank you for the kind words. I tried to use the materials I had at hand. I was thinking of making a spare tire hammer but that thing sits pretty tall. It ended up this is the design that I came up with and I kind a like the footprint of it. Again thank you
@RevivedBuilds5 жыл бұрын
That’s awesome! I’m sure it’s great to use the machine after all the work it took to build it!
@AMakersJourney5 жыл бұрын
Revived Builds It is actually a lot of fun and very quick. Thanks for the comment
@RevivedBuilds5 жыл бұрын
@@AMakersJourney Whats your thought on a making a hydraulic press? Iv been curious about pros and cons compared to a power hammer.
@billy194615 жыл бұрын
I just got through watching all five of your videos on the power hammer and wanted to congratulate you on a fantastic job! Could I ask what kind of shop you are in? Most of us don't have three or four welding helmets and jackets hanging on the wall. Would love to have a set of plans with measurements.
@AMakersJourney5 жыл бұрын
I actually hold workshops and classes in my shop. On the side I do custom work and handyman stuff. Thanks for the comment
@florh5 жыл бұрын
very impressive, i've learnt a lot! May i make a suggestion though now that I saw how you can make one thing better? That last piece you made, with the 2 rollers on it, to drive the belt? Why not make that a rotating piece, instead of the motor mount? Just put a spring on it, and when you press with your feet, it puts tension on the belt. I assume the motor is always running to prevent high amp spikes from putting it on and off that could blow a fuse? Personally as a safety guard, I find it a bit dangerous to make a moving part of a motor mount, but that's just me. I would even add a little safety feature so it could not turn on by accident. Well, actually, personally I would use a clutch instead of this system, like how the gearbox of a car acts with the motor. All together, very impressive, you must been doing metal working for years and years! I just got started, wish me luck and several first aid kits, lol :D
@AMakersJourney5 жыл бұрын
Thanks for the kind words and suggestions. I started off with the thoughts of doing that same type of system with the tensioners. I just happen to like the control I got off the direct motor. Again thanks for the kind words
@jamesball73225 жыл бұрын
I actually just switched mine from the pulley and clutch drive system to the ol faithfulness of a tire hammer(damn belt constantly stretching),I’ll upload how well it works with it Good job on yours man 👊🏻
@ValdenorRSantos5 жыл бұрын
Muito bom, só falta criar um câmbio que ligue o movimento da bigorna com a polia do motor, para não ter que usar a correia da polia do motor como redutor de velocidade. Porém o projeto em si é magnífico, parabéns amigo, genial.
@AMakersJourney5 жыл бұрын
I tried to use the materials that I had a hand in this was the best pulley system that I came up with. You’re probably right that system would work just fine. thanks for the comment
@gateway88335 жыл бұрын
Looks good, ever thought of a counterweight, it will sure smooth out all jumping around and it will save the bearings
@AMakersJourney5 жыл бұрын
I have been considering a counterbalance. I will try that and see how it works out
@gulliver1805 жыл бұрын
Abby very good thought about adding counterweights, I have seen them on other machines, but I don't quite understand the concept, could you explain the concepts of the counterweights?
@andrewyork38694 жыл бұрын
@@gulliver180 it balances the fly wheel right now it's a bit heavier on on side then the other. Which causes vibrations, and can cause problems in the long run.
@americanmaker86085 жыл бұрын
Very steampunk looking
@anselmosegundofuentesfuent12485 ай бұрын
HERRAMIENTA DE PERCUCIÓN MUY UTÍL PARA FORJAR TODO TIPO DE PIEZAS DE ACERO.
@paranoy695 жыл бұрын
Hello. good work. little question. Why did not you build the lower part of the anvil a few inches higher? it seems to me that it would have been less painful for your back. Because right now you have to be lying forward during the work of shaping the metal. But I find your power hammer very well built. Congratulations. have a nice day from Rouyn-Noranda, province of Québec, Canada
@KageStelhman5 жыл бұрын
Just got done binge watching the build, have to say that you made it really easy to follow... All you have to do now is bolt that bad boy to the floor and start making some tooling for it Anyhow I'll be keeping an eye on your channel from now on Subscribed ^.^ P.S. For making said tooling I would Suggest using H-13 hot-work steel, it's really tough to forge, abrasion resistant, and a bit more expensive than other tooling steels, but it's a lot more durable than most steels that I know of plus it's air hardening
@AMakersJourney5 жыл бұрын
John Bovee I really appreciate the comment. I will definitely look into that H-13. You made my day. thanks for subscribing
@KageStelhman5 жыл бұрын
No worries ^.^
@edwardpfaffel45025 жыл бұрын
Very nice build. Is your ram and sleeve steel to steel or does it bushings? Thanks.
@AMakersJourney5 жыл бұрын
Ed Pfaffel It is a steel sleeve. Should last a wild properly lubricated
@KageStelhman5 жыл бұрын
What you could do is cut a shallow groove in the Ram (Center Line) so that it retains Packing Grease longer and/or drill and tap a hole in the Sleeve to fit a Nipple for a Grease Gun
@ericericson31315 жыл бұрын
I hope you plan to bolt that thing down. It looked like it was about to fall over a couple of times Cool machine
@suyononano35764 жыл бұрын
Thanks 👍
@kirkruiz124 жыл бұрын
Like the build would like one with a little more weight about 50 pounds would this hold up?
@wilburcollins83423 жыл бұрын
Thanks
@michelfernando57452 жыл бұрын
Hello how are you? Could you make the project of this hammer available? thanks
@AMakersJourney2 жыл бұрын
Sorry I do not have plans for the powerhammer. My last video does have most of the dimensions on it
@crupie13 жыл бұрын
It works.
@oniplays25363 жыл бұрын
question where did younsource the ram and the ram retainer?
@AMakersJourney3 жыл бұрын
If you were talking about the sleeve that the ram slides through. I pick that up at metal supermarket and then have a friend bore it out .030 larger inside dimension.
@oniplays25363 жыл бұрын
@@AMakersJourney one thank you for responding inappreciate it alot, two how did you secure the forging die to the ram is it welded or is there a medhanical connection as well. id loke to make one with inter changeable dies
@AMakersJourney3 жыл бұрын
@@oniplays2536 I did weld the top die to the ram. I tried rounding the dice first to spread material faster. I soon realized I’d rather have flat dies in it just made more sense for what I was doing. It is a small machine. Still better than hammering by hand any day
@verdigrissirgidrev41525 жыл бұрын
right now it looks about as powerful as an angry housecat. but maybe with a faster motor and a bit more side stabilization it could make a decent hammer for knives and other small projects.
@buamaynamphuongloren11 ай бұрын
hay quá bác ạ
@user-aleksbel9jz5l3 жыл бұрын
Береги пальцы.
@jorgenavaro8654 жыл бұрын
Sir, good day, Can I ask a plan of your hammer? I need a hammer like that here in the Philippines. Thanks.
@AMakersJourney4 жыл бұрын
Jorge Navaro Check out part 6 it has a lot of the dimensions
@jorgenavaro8654 жыл бұрын
@@AMakersJourney Ok sir, thanks.👍🏻😁
@geralspringer10035 жыл бұрын
try a 2 or 3 hp motor an tighten up belt on motor look good
@AMakersJourney5 жыл бұрын
One horse power seems to be more than enough I can’t even run it at full throttle. It wants the Taco Bell without it being secured to the ground
@woodsydayz43615 жыл бұрын
how much has it cost you so far though ?
@AMakersJourney5 жыл бұрын
Woodsy Dayz Not counting labor I think I’m looking at about four $500 total
@saidmadeen47103 жыл бұрын
Price batana
@cokhichetao722 жыл бұрын
Sức nặng trăm tấn
@haroldhall4926 Жыл бұрын
Can I get some measurements
@anthonygood92745 жыл бұрын
Fill the body with sand
@a.kaspary5 жыл бұрын
How many hp does the engine have?
@AMakersJourney5 жыл бұрын
Alexandre H. Kaspary 1 hp
@a.kaspary5 жыл бұрын
How many rpm?
@AMakersJourney5 жыл бұрын
Alexandre H. Kaspary It’s 1800 rpm’s I got the motor from Harbor freight. If you go with a larger pulley up top you can get it to travel slower. I’m using a 10 inch poly up top right now. If I push the pedal to the floor it goes way too fast