Blade Fusion 180 | Tailboom / Tail Control Rod Replacement
Рет қаралды 521
6 ай бұрынIn this Fusion 180 / Fusion 180 Smart repair tutorial, Ethan Ater will be showing the correct procedure in replacing the tail boom [BLH5812] and tail control rod guide [BLH5811]. One thing to keep in mind when working with small helicopters is that the screws do not require as much torque as those on bigger helicopters. Install with a small amount of torque after the screw starts to feel tight.
Please visit www.bladehelis.com/product/fu... for more information on the Fusion 180 Smart.
Follow Blade RC on Facebook and Instagram!
/ bladerc1
/ bladehelis
@glenn4452 4 ай бұрын
Good information sir,especially about the servo position.thank you sir
@JG-dx1ud 5 ай бұрын
Thank you!!!
@sawyerheslep8493 6 ай бұрын
Dude when are we gonna get some scale bnf helis? We have been waiting for years dude! Years!
@bladehelis 6 ай бұрын
This is something we have been getting asked about and we have DEFINITELY taken it into consideration. ;)
@sawyerheslep8493 6 ай бұрын
@@bladehelis it better happen in my lifetime
@user-py7lr5no2h 6 ай бұрын
Thanks for video. When reinstalling tail boom how do you know if you have sufficient tension on the belt
@bladehelis 6 ай бұрын
Great question! One way to ensure that there is sufficient tension on the tail belt is to apply a small amount of pressure on the belt where it almost reaches the Front Belt Pulley [BLH5807] with a small driver. There should only be a small amount of movement (a couple mm) in the belt when applying pressure to it.
Aviation Republic
Рет қаралды 497 М.
Comedy Club
Рет қаралды 7 МЛН
CoeShow619
Рет қаралды 7 М.
เจไจ๋แปน J Jai Pan
Рет қаралды 46 МЛН