@Amazinghumor 13 күн бұрын
Appreciate this content Og🙏🏽
@ConcisetheBarber 13 күн бұрын
you're welcome
@mikedog5289 Ай бұрын
Video so good I need to watch it again to really absorb the valuable information right now I use the jrl fade blade and I really love it
@ConcisetheBarber Ай бұрын
Dope Mike glad you like it
@cngwt3979 Ай бұрын
i only still keep my magic clips for the staggertooth. once JRL makes a staggertooth blade, the magic clips are out of my station
@ConcisetheBarber Ай бұрын
That’s would be interesting
@AtTheBarbers.Polska Ай бұрын
Nice!
@ConcisetheBarber Ай бұрын
Thanks!
@alexisbrown733 Ай бұрын
Thx u for sharing very informative 👍
@ConcisetheBarber Ай бұрын
You’re welcome
@topcatgrindhard2959 Ай бұрын
Much needed🔥💈👑
@ConcisetheBarber Ай бұрын
Glad you enjoyed the video
@Mackcuttin Ай бұрын
In my experience with them all, the caper blade set is less forgiving when fading. Super intentional with how it cuts. Works different depending on the hair type
@ConcisetheBarber Ай бұрын
True also depends on the barbers how they use it
@flowmagic5 Ай бұрын
Right to the point 🤙🏽
@ConcisetheBarber Ай бұрын
Thank you
@nazarethproductions7095 Ай бұрын
Best blades for me is the is the bablyliss OEM blade, babyliss taper blade, and oster fast feed blade. Good all around wahl fade, jrl vapor and andis taper blade. (Don’t last long) Every other blade either pulls or snags the skin, or just doesn’t as I like no matter how it’s adjusted.
@ConcisetheBarber Ай бұрын
Dope line up
@Mr.Oct___ Ай бұрын
I use a ceramic on my fast feed. Love that…
@ConcisetheBarber Ай бұрын
yea man dope combo
@JoRd4n-Kutz Ай бұрын
Most hated Wedge blade is missing my guy!!😆
@ConcisetheBarber Ай бұрын
lol true..its definitely not one of the most used...that a specialty blade same at the surgical blade
@desmondmitchell5602 Ай бұрын
I love that blade.i Didn't at 1st.untill iI learned to cut with it
@josethebarber239 Ай бұрын
Crazy thing is it's 1 of my favorite blades.
@jt2475 Ай бұрын
@@desmondmitchell5602what tips do u have using it?
@No1Similar2Norm Ай бұрын
The black wedge blade goes through bulk just as good as any blade up there, plus it’s fades cleaner and closer, so I don’t understand why it’s not used as much. And it naturally lays flat on the scalp when blending and detailing. Most barbers think fade blades are the way to go when fading but don’t hold the blade flush to the scalp, instead they use the blade at a 45 degree angle which is wrong.
@akronrc2827 Ай бұрын
Faper blade on magic clip! Crazy great vid
@ConcisetheBarber Ай бұрын
Thank you 🙏🏾… glad you liked the vid
@ljjlander1 Ай бұрын
@@akronrc2827 Imma try the faper blade with the FF cutter on my MC
@jovanjubert4046 Ай бұрын
They do make ceramic stagger blades and i put cermic on my corded masters and yes it stays cooler longer.
@tww15tube Ай бұрын
Lets go!
@ConcisetheBarber Ай бұрын
thank you
@identify952 Ай бұрын
Do trimmer blades next
@ConcisetheBarber Ай бұрын
Working on it
@identify952 Ай бұрын
@@ConcisetheBarber thanks man 💪🏾 I’m looking forward to it
@bradcresswell4255 4 күн бұрын
So the cocco now has sc cutting blades and the faper blade doesn't come with that cutter that is the suprent cutter blade
@ConcisetheBarber 3 күн бұрын
ive been told that they upgraded the cutting blade so if you get a cocco blade now it might be different
@raze2400 27 күн бұрын
Which blade would he best for bread? I like no clip all the way to the top
@ConcisetheBarber 26 күн бұрын
what do you mean by no clip?
@desmondmitchell5602 Ай бұрын
You forgot about the wahl taper blade...1006
@ConcisetheBarber Ай бұрын
It really .. it’s a taper blade so I talked about that blade .. many companies have taper blades just showing the true differences to blades period
@desmondmitchell5602 Ай бұрын
@@ConcisetheBarbergotcha
@terrence4069 Ай бұрын
Faper or taper blade with magic staggered cutting blade even more forgiving?
@joshuasuarez2370 Ай бұрын
Taper blade is more forgiving.
@terrence4069 Ай бұрын
Got a link and code to buy them black fast feed blades and ceramic cutting blade?
@ljjlander1 Ай бұрын
There's a blue mim blade with 27 teeth. You should review that one
@ConcisetheBarber Ай бұрын
Yea I would like to try that one
@Luke-wh9ru Ай бұрын
Babyliss loves over releasing jeez... the 27 tooth doesn't come on the loprofxone I'm assuming?
@desmondmitchell5602 Ай бұрын
@@Luke-wh9rulol nope
@Luke-wh9ru Ай бұрын
@@desmondmitchell5602 shady biz moves right there fr!
@jt2475 Ай бұрын
Anyone have experience with the mim blade? What I like or dont about it
@davidsee3566 Ай бұрын
Rad content my guy, i love that babyliss blue blade. I use it on my Tpob goblins. It’s my go to for detailed fading. What are your thoughts on the wedge blade and the blade that comes on the TPOB Play? Respectfully
@BigT1523 Ай бұрын
Will the stagger tooth Wahl cutting blade fit on the babyliss lopro fx with the MIM blade or the TPOB Play??
@ConcisetheBarber Ай бұрын
yes it should fit on the lopro
@DonTheBarber Ай бұрын
🔥🔥🔥
@ConcisetheBarber Ай бұрын
Appreciate it
@user-uh1nm3dj4l Ай бұрын
If I need one good caliper just for styling the beard, do you recommend whal Magic Clip Gold ?
@ConcisetheBarber Ай бұрын
That’s not a bad one to pick plus its good pricing and I also have a discount with wahl at their direct site (concise15)
@arealoptical Ай бұрын
how about vgr-001/kemei 2796 fusion blade??can you review it??
@ConcisetheBarber Ай бұрын
yea one day when i get it
@arealoptical Ай бұрын
@@ConcisetheBarber okay bro..waiting for it👍👍👍🙏
@valetudo025 Ай бұрын
Switching the blades out to ceramic does not make the blade move faster. I tested this out with two corded fast feed clippers. I used the RPM app, Giri. Both machines ran at 3633.7 rpms. Unless I’m incorrect, I think the machine is capped at that rpm speed which would make the blade move at the same speed.
@ConcisetheBarber Ай бұрын
i have that rpm tester as well ...however it doesn't detect 100% accurate but its close ...and for me ive used it on masters and fast feeds ..i feel it move faster however i like the steel better...but most that use ceramic will probably say the same that it can move faster
@ljjlander1 Ай бұрын
@@valetudo025 there's less drag with ceramic tho
@joshuasuarez2370 Ай бұрын
Depends on the motor type and clipper. It certainly does increase speeds on many setups. I always do before and after RPM tests when modifying clippers. Will never slow it down, but high chance to improve speeds slightly by around 5-10 percent in many of my test findings. Poor RPM apps don’t do the job. You need to buy an actual rpm laser tester to see it properly
@valetudo025 Ай бұрын
I use fast feed at work with a ceramic blade. I don’t think the blade moves quicker. It might be smoother and stay cooler longer. after using the rpm app and watching the blade move, I still believe that particular machine is tuned and set at a certain rpm speed. Nothing will make the blade move faster, and if it does, it’s negligible. I think this myth came out of it moving faster back in the day before all these cheap rpm apps were available on phones. I’m going to call this one debunked.
@valetudo025 Ай бұрын
@@joshuasuarez2370 it may increase the speed on other machines (vector motor) but on the fast feed it does not. I haven’t tested other clippers with ceramic blades to confirm or not.
@user-uh1nm3dj4l Ай бұрын
Which trimmer for beard design and lines do you recommend, Babyliss Gold fx or saber?
@ConcisetheBarber Ай бұрын
Both are good really preference with that comparison
@ConcisetheBarber Ай бұрын
Do they both come with a dock ? Battery life etc etc .. like that time of stuff .. but performance is very comparable
@user-uh1nm3dj4l Ай бұрын
@@ConcisetheBarber thanks man
@BigT1523 Ай бұрын
What clippers will the Wahl stagger tooth blade fit on???
@ConcisetheBarber Ай бұрын
its a good amount ..say the name of them and i can let you know
@dailybreaddaily7300 Ай бұрын
@@ConcisetheBarber instincts?
@EugeneHenderson-jt8kf Ай бұрын
Which blade has that crunch factor
@ConcisetheBarber Ай бұрын
Andis and oster will always have the loudest sound to me
@EugeneHenderson-jt8kf Ай бұрын
@@ConcisetheBarber I put the fusion blade on my VGR v003....it has a nice crunch on the low speed 7000 rpms .....high speed 8-9000.......blades definitely are the difference
@HassenVillavicencio-zt4vr Ай бұрын
noti ganggg
Sofie StayGold
Рет қаралды 12 М.