The MixRGB node is the legacy node that's still kept for compatibility, the new one you can get by using a Mix node and setting the type to color
@Littlerolz Жыл бұрын
Thanks for the heads up. It's very handy to have all the different mix functions in one node now!
@fishnpotatoes Жыл бұрын
@@Littlerolz No problem! If you use Cycles you can also easily apply this material to all objects using the material override option found in the bottom of the view layer properties.
@Littlerolz Жыл бұрын
@@fishnpotatoes oh really that’s a feature I actually didn’t know about! Good little tip right there!
@fishnpotatoes Жыл бұрын
@@Littlerolz Yeah I know some other people have used it to make clay renders of their scene by applying a clay material to all their objects
@idoblenderstuffs2 жыл бұрын
ive never seen that grease pencil method for outlines lol. i see a lot of people use the other one you mentioned, although i personally found another method wich is a lot easier, less fiddly, and does look better in most circumstances. in the shader tab, you use the Fresnel node and multiply it over your texture with a mix RGB. you can use a colour ramp to change what colour you want the outline to be as well.
@Littlerolz2 жыл бұрын
Oh that’s cool, I didn’t know the fresnel node could be used to make an outline like that. I’ll have to give that a go!
@kaibe52417 ай бұрын
This is pretty cool, I'm looking to do something similar but instead of "lines" for shading, using dots.
@kaibe52415 ай бұрын
Come again?@quicklearner5g
@JeffNotes2 жыл бұрын
eyyyy, fellow person that is not good at drawing! This tutorial really helped me figure this out mann, awesome! =)
@Littlerolz2 жыл бұрын
Glad I could help out! The real drawing skills will come later with practice haha
@zaelitude Жыл бұрын
if you already have NodeWrangler, then ctrl+0 will add a MixRGB
@cosmicarts21 Жыл бұрын
Perfect! These is all I want!!! Thank you so much!!!!!
@dez7852Ай бұрын
Thank you for this!
@thedudeguy1238 ай бұрын
Littlerolz, i've just recently discoveret you, and i must say i realy enjoy these helpful short tips and tutorials. i do realy hope you will return to make vidios more often man. ( also your sci-fi discambuluater video was insanly enjoyable too!)
@Littlerolz8 ай бұрын
Thanks for the kind words! :D I would like to get back into making videos, its just a little hard getting back into making things i feel people would want to see and find useful
@thedudeguy1235 ай бұрын
still hoping for more vides mr.@@Littlerolz !
@violettracey9 ай бұрын
Thank you!
@TC3Dgraphicdesign2 жыл бұрын
Great! Thank you sir.
@spearmaster-rw2 жыл бұрын
i wish you get ro 1k, good luck!
@Littlerolz2 жыл бұрын
Thanks for the support!
@hritikvyas5285Ай бұрын
will it work with texture ?
@hamdullahguclu974311 ай бұрын
I wish you shared the texture, I couldn't find it.
@Nativefall Жыл бұрын
How do I add this with an existing texture?
@user-id9bb2lt9h Жыл бұрын
Is there any way to make this work in cycles???
@skepticalnewyt Жыл бұрын
How could I make it work for cycles, is it posible at all or not
@honawa Жыл бұрын
Does it work in cycles??
@trulex Жыл бұрын
Thank you so much for sharing!! No offense bro but your voice sounds like Jesse Eisenberg, at first it appeared like HE was narrating the video
@Littlerolz Жыл бұрын
Well I've never been compared to him before lol! but I'm glad you liked the video haha!
@MarshmallowBoy2 жыл бұрын
darn, you are underrated.
@Littlerolz2 жыл бұрын
Thanks! I appreciate it!
@MarshmallowBoy2 жыл бұрын
@@Littlerolz yeah. this is really high quality. i am suprised you don't have more subs.
@Littlerolz2 жыл бұрын
@@MarshmallowBoy thanks! I mean I’ve not been at it for all too long and I’m still just trying stuff out and having fun in blender honestly
@MarshmallowBoy2 жыл бұрын
@@Littlerolz Thats awesome, there really isn't as many good tutorials as you would think there would be in the blender community
@Littlerolz2 жыл бұрын
Ah I don’t know about that, there’s some crazy talented people on KZfaq making all sorts for blender! All of who deserve loads of recognition for what they’re making! I’m just happy to be able to be a part of that community!
@keineken_328111 ай бұрын
For some reason, the Guru node didn't work, it very noticable where it ends and starts. Do you have any advice for this?
@pierrethehandsome251811 ай бұрын
Is there a way to set up this shader where the shadows would blend better with objects theyre casted on? What i mean by this is that ive applied a normal map to the bdsf, but the object's shadows tend to be completely opaque, therefore obscuring the normal map and any other detail. How might i make the shadows less intense? Changing their color on the color ramp just obscures it with a different color
@tiaan_va Жыл бұрын
Why does the compression on this video look so low res? My player is set to 1080p and even when viewing it on a 1080p monitor, the smaller text of the nodes at some zoom levels are just 100% unreadable because it's just fuzzy, kinda looks like a low resolution video was upscaled to 1080p. I've made 1080p screencasts before and have uploaded them on KZfaq before and the text was always quite crisp when watching those videos back. Might be something worth checking into. What settings do you use when exporting your videos for upload?
@Littlerolz Жыл бұрын
Oh sorry about that. It looked fine my end when I edited it. Don’t know if KZfaq compressed it any more maybe or after the initial export. Don’t know. Either way I’ll set my text scaling to be a bit higher in future so it should still be readable even if compression takes a toll on it!
@tiaan_va Жыл бұрын
@@Littlerolz I have seen that it actually looks fine on some of your other videos. Had to see if it was a once off thing or not. So think something might have gone wrong with only this specific export
@Littlerolz Жыл бұрын
@@tiaan_va yeah I received another comment on this video about it looking blurry but not on anything else. Guess something just happened when I made this one. Sorry again, I’ll try to make sure it won’t happen in future. Hope the information was still at least understandable mind!
@tiaan_va Жыл бұрын
@@Littlerolz it was, so thanks for the video, exactly the kinda effect I was looking to create to an upcoming project I have to do :)
@shamusmoore Жыл бұрын
where's the link for BlenderGuru's addons?
@LylaFur4 ай бұрын
doesnt work anymore
@Maanjiro_gАй бұрын
Why
@Maanjiro_gАй бұрын
I havent tried it yet but I think it would work...
@LylaFurАй бұрын
@@Maanjiro_g one of the nodes doesn’t exist anymore.
@WordyDird_artАй бұрын
@@LylaFurWhich one? A lot are just renamed. Like the Mix color node. It's just a Mix node now I believe.
@wallon53612 жыл бұрын
Is there a way to export the cross hatching shader into a texture to be used in another program like Sketchfab?
@Littlerolz2 жыл бұрын
I think you should be able to but I can’t say for certain how it would work as I haven’t used sketchfab. But when you export files as .obj files they can keep their materials associated with them so I don’t see why you couldn’t do it
@games528 Жыл бұрын
@@Littlerolz You can bake it into a texture, though it won't react to light anymore afterwards.
@narasimhahm321 Жыл бұрын
Hi Great video really helped a lot of people, by the way where did you get the Crosshatch texture ? , it really looks organic and great.
@Littlerolz Жыл бұрын
Thanks! And I got it off a quick google image search. Just looked up crosshatch texture and found some good ones
@israelfv Жыл бұрын
Y E S
@christopheralexander76402 жыл бұрын
the light doesn't seem to effect it for me :(
@Littlerolz2 жыл бұрын
Make sure your light is strong enough from the source. I found this doesn’t work well with HDRI’s if you’re using one. Other than that try adjusting the coloramp node slider. Hope this helps!
@christopheralexander76402 жыл бұрын
@@Littlerolz Yeah, I tried the light being stronger, i set the lamp to 10,000,000 watts, but it no work. But I wil try the other thing, also ur vids are awesome, keep up the good work
@Littlerolz2 жыл бұрын
@@christopheralexander7640 haha yeah I think that should be bright enough lol. I assume you've got all the nodes set up correctly and you're in full render view. The mixRGB should be even between them (unless you're going for something a little different) other than that, without seeing it I can't think of anything that could be the issue sorry. And thanks, you're feedback is really appreciated!
@ryleypalmer2 жыл бұрын
use eevee
@Littlerolz2 жыл бұрын
@@ryleypalmer yes this is true it only works in eevee
@Hyper-Fixation-Studios2 жыл бұрын
could you use it for a video game?
@Littlerolz2 жыл бұрын
You probably could but game design is something I know very little about so I can’t say for certain sorry
@idoblenderstuffs2 жыл бұрын
you could maybe use a similar method for a game. although you would have to figure out how to make the same effect with unity's shaders (or whatever engine youre using)
@hamdullahguclu974311 ай бұрын
I don't have the color rgb mod. What is the new name?
@XINN1X10 ай бұрын
its caller Mix now. Add the Mix node and then change it from Float to Color
@undead1ll1Ай бұрын
@@XINN1X I hope you have a good life
@AminWTАй бұрын
Doesn't work anymore ;)
@fuyu1259 Жыл бұрын
bro increase your bitrate, this sh1eeet looks like it's out of focus and my head hurts
@Littlerolz Жыл бұрын
Hey sorry to hear that. Tbh I don’t know much about bit rate. Would that be something when recording or editing and exporting a video?
@halano Жыл бұрын
I want shader for render engine not object material Blender community are no lifers
@Littlerolz Жыл бұрын
As far as I’m aware without digging into compositing and a lot of post processing there’s no way to apply a shader to an entire scene like that. You have to work on an object by object basis. You get far more control over what’s going on that way after all
@shamusmoore Жыл бұрын
quite rude :(
@halano5 ай бұрын
@quicklearner5g With the newer blender version I discovered many ways to do global shading,including shadow pass, thanks for point that out.
@maksimuru11 ай бұрын
video is of poor quality - text is not visible
@mwatsonanimation6 ай бұрын
You need to change your video settings to 1080p by clicking on the cog icon