No matter what they say You’re a hero to blender community

just a quick note for everyone using blender 2.81 who wants to follow this tutorial: not all the settings for the voronoi node mentioned at 1:40 are possible anymore since the node has been hcnged in 2.81 the way to still get the exact texture shown is by making a math node, setting it to subtract and connecting hte distance value of a voronoi texture set to 3D, F2 and chebychev into the top value and the distance value of a voronoi texture set to 3D, F1 and chebychev. then you will have the exact same texture as shown in this video. ideally the scale values on both voronoi textures should be the same (if you want to copy this tutorial exactly: it's still 1.7) otherwise you'll end up with very weird looking patterns

all you have to do to solve any problem: add in a color ramp!

If youre using 2.8+ version i recommend putting your vornoi settings on 3D - Smooth F1 - Chebychev this gives you a rather similar result And also scale down the smoothness

You can, - Add a metallic PBR material of your choice - Add a wobbliness to the lavalike orange spot to make it look a little unpredictable instead of just a perfect circle - Plates and orange emissive material looks isolated from each other so there should be a way to make both of them look like they are interacting with each other. - You can use a black-orange coloured image to give it a variation and realism without many efforts. - Abstract Background reflections can be added. (Little bit practice work for intermediate learners )

For people who are stuck with the crackle effect,,,duplicate the voronoi texture.Ste one of them to f2 and the other to f1.....use a math node and subtract f2-f1....plug it to the color ramp and adjust the slider......make sure to connect DISTANCE outputs to the math node

OK i was able to get this to work with blender 3.1.0 I used 2 Voronoi Nodes, 1 settings are 3d F1 Chebychev, 2nd Voronoi settings are 3d F2 Chebychev. Make sure the scale is the same on both of them. They are both then connected to a Math Node which i have changed to Divide. Used the Value out for doing all the steps in the tutorial where Ducky used the Voronoi Crackle Texture. Then just play with the Color ramps, including flipping at a few places.

Whenever I watch your videos, I always try to guess the next node you're going to use, it really helps in understanding how these nodes work.

In Blender 2.81 the Voronoi texture node has been changed. The equivalent of Intensity-Chebychev-Crackle is: the substraction of the distance output of two Voronoi nodes, one with 3D-F1-Chevychev and the other 3D-F2-Chevychev. Similar to this wiki.blender.org/wiki/File:Blender2.81_voronoi.png. It took me two hours to find out.

Every Tab is a universe of its own in blender. Thanks for shedding light to infinite possibilities this crazy application has.

Crackle is now called distance to edge for the ones who are stuck there!

Love your tutorial the way u teach without any skip or timelapse. Waiting for your blender course for bigginer to master. 👇 👇 👇

If anyone's trying this in 2.81 or above you'll have noticed that crackle as gone out of the voronoi. To solve this duplicate the voronoi set one to F1 and the other to F2 then combine the distance with a math node set to subtract then add the colour ramp.

did you know that in blender, to copy and paste text or numbers, you don't have to click into the text field? Just hover over it and press ctrl+C or V or stuff like that. Not that important, but kinda cool

I can't tear myself away from your videos💯💯💯💯

My laptop hates me doing these tutorials 🙄. Acer aspire 5 i3 8th gen, but it is working so far farming out the final render to a 3060 build 🤷🏽‍♂️. But I'm just happy that I have actually reached a point where I can follow along with these at all 👏🏼. Thanks to Blender Guru and Grant's node training (lifesaver). You design in a style that I find most appealing 🤙🏼

it works in blender 2.92, you just need to modify some setting

legit ima make this, then make it my desktop wallpaper, looks so gooood

U r my best guru for blender

Boom; was waiting for that!!

Looks awesome Going to try it later

I love the videos. I just started with blender and most tutorials are really complex but yours are so easy to follow! Keep up the amazing work.

I love it! Sometimes searching for the how and what, but that's the only way to learn something! Well done!

Always a joy to watch.

Used blender for 3D sculpting and now I've decided to put textures as such, newly subbed to your channel because you make awesome content! Thank you!

This looks gorgeous! Gonna try it right away!

This is my overall favourite of your tutorials!

Such a siiick look on this one! As soon as I saw this pop up on your instafeed, scramble to check and see if you confirmed a tutorial, you did, which made my day and then... you delivered! Nathan, great design man. Some real creative powers in that skull of yours to keep churning out all these interesting designs and then make such digestible tutorials. Just slaying it sir.

Thanks. I really loved this project

Thank you for this amazing tutorial that really helps me to understand better nodes

I like this very much. Especially the specific voronoi texture to make circuits. Nice!

I do like the look of this, but in my opinion it looks even better with displacement instead of bump

If you click and drag the top number to the bottom number (like at 6:54) it copies the top numbers to the bottom numbers. If you type something in after doing that all of the things you've just dragged over each other are changed.

Absolutely awesome keep on doing these type of stuff

I just finish it. it looks perfect. thanx you

I'm so lucky for find you great job man

Amazing tutorial and very helpful for my current project. Thank you for the great educational content Ducky, I hope your channel continues to grow :)

Thank you Nathan, its beautiful

Nice bro nice #keepfilming

@Ducky3d mine Vornoi texture is different from yours I'm using blender 2.82 Why

They removed the crackle setting in the new version, how do I do it then?

when a 13 minute tutorial video turns into 5 hours of intense real time learning...

Great choice of colours and would look amazing in an animation - lots of scope for variations on the theme... cheers 👌🌠💯👀😎💡

hi man i want to use this technique in my model but voronoi textuer is changed in 2.93 can u tell me how i made same thing in this version : )

amazing work man, helped me a lot, I will apply this idea in my animation

looks amazing

Thank you for this incredible tutorial!

You are too strong the friend .. thank you very much I really needed a tutorial like that

How is this going to work in Blender 2.81? They removed Crackle from the Voronoi Texture

Wowsers that's an awesome design bro. Super creative!

the power of color ramp

great stuff ducky ! Thanks

Doesnt seem to work in blender 2.81- The voronoi texture has different settings

Love it ! Such as all your videos, things are well made and well explained ! A good way to learn, thanks ! :)

simply awesome tut learn a lot from it.

Love your tutorials. Great work!

Some tutorials got worthless cuz the Shading system and nodes changed so much so we cant do as you say. Voronoi Texture doesnt have the Crackle Stuff anymore

just genius...

just wow

Very good thank you for the excellent work you do !!

The voronoi node changed again shortly after this build and now I can't figure out how to get the "beveled" edges on the chebychev cells now. Does anyone know?

click the two boxes and hit f. it will "fill" the line between expected nodes. doesn't always get it right, but I find it's easier to correct the already made connection than a new one. also... you are awesome and I love learning from you. super curious where you learn from and get your inspiration.

At 8:38, you can just duplicate the line of cubes as a whole, rotate them 90 degrees on the z-axis, and then position them correctly on all four sides of the beveled cube. Just a tip to make things faster and easier. Like this comment if this was helpful.

It actually doesn't look like a sci-fi landscape for me but like a COMPUTER CHIP! By the way well explained.

Gracias amigo.

Oh yeah... that's for sure... very Sci-Fi looking rendering!

ya got the tut finally!!!

This is awesome 👍

u're amazing i love you man

Color Ramp looks so dumb but it has the sollution for everything

Is this from the new HP security design? Looks great!

whoA ! in 2.90 the voronoi-node no longer has options like crackle when you set it to chebychev !? So it's improved and upgraded, but has also lost features !? weeeeird !

Genius 😍😍😍👏👏👏🤝

Wow! I love it! :)

that was cool

Very useful thks!

In 2.81 the Voronoi texture, the mapping and the bump node has changed, so I failed to follow right on the very beginning.

good job, thats really cool

that voronoi texture don't have any closet feature output

Great tutorial

blender 2.81 Voronoy texture NO Crackle I do not know what to do Help please

How can I do this tutorial in Blender 2.82a? ... the "Voronoi texture" node is different in version 2.8

My Voronoi texture doesnt have the same options as yours

You're an absolute animal. I love it.

Wow awesome work 👌 👌

awesome man

My voronoi texture doesn't show closest/crackle option what do I do

i dont have a dollar but thanks for your product placement like chrome doing adblocking in , im a go get another browser and stop watching ads on youtube

Alright, that was neat, subscribed.

My GPU when rendering with Cycles be like

Dude keep these videos up!

How does the voronoi texture in blender 2.82a works!!!?

every time when I follow your tutorials, I keep on getting another result...

Now all it needs is some floating points to label where the "A.I. Technology" is and you can make bank!

Throws highly detailed alien landscape that took 50 hours into trash :(

you are holy shit blender master! I respect you

i love it

What laptop do you use?

Hey ducky!!!! My voronoi doesn’t have the same features as yours!!!!!!!!!!!!!!!!!! What should I do!!!!!!!!!!!!!!

Dude, i love you