In today’s video we will demonstrate the step-by-step connection of the Blind Spot Detection system, which consist of 360BSD and MDVR8204S
0:10 We have already introduced the 360BSD AI Monitor in our recent video, so if you want to know more about the 360BSD AI Monitor, you can first check that out.
0:20 This system consists of the MDVR8204S, a 3SD card MDVR. An AI 360BSD Monitor, 7 cameras for the front, rear, left and right side of the vehicle and a Quad Monitor.
--
0:33 Here is the 360°BSD connection to MDVR8204S.
First, there are 4 1/2 extension cables. The first single end is connected to the tail line of the front camera. The rear end of the cable branches out into two lines, one end is connected to the 360BSD and the other end is connected to the MDVR.
1:06 Connect 360BSD to the first channel, CH1 of the BSD screen. After the connection is completed, the MDVR on the other side is connected to channel one of the DVR. After the connection is completed, the BSD screen and DVR channel one displays the front camera image.
1:42 The second rear view is also separate. One end is connected to the tail line of the rear camera, and the two ends are separated. The 360BSD is connected to channel two, CH2, and the other end is connected to DVR channel two. DVR channel two displays the rear-view image.
2:28 The BSD on the left side of channel three is also connected to a separate end. Two separate 360BSD channels are connected to channel three CH3. The other end of the DVR is connected to DVR channel three. The DVR left view and BSD screen display the left view image in three channels.
3:09 The fourth right side BSD, a separate end is connected to the right BSD, the other two ends 360BSD are connected to the BSD screen CH4, and the other end is connected to the DVR fourth channel. Complete the connection with DVR
--
3:39 To know more about our smart products, subscribe to our channel or send us an email inquiry!
#BSD camera,#bsd blind spot detection system,#Blind spot detection,#Blind spot detection system #qoho