No video

SWAPPING YOUR AOD FOXBODY OVER TO A MANUAL? Watch this before you start!

  Рет қаралды 15,115

BREW2L

BREW2L

Күн бұрын

Here is a quick overview of a t-5 swap in a foxbody, Some things you'll need to know before getting started.
#AODTOT5 #T5SWAP #FOXBODYSWAP
WANT BREW2L DECALS? www.shopbrew2l...
LINK TO SHIRTS: / @brew2lfoxbody
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.t...
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.c....

Пікірлер: 85
@markdebruler5886
@markdebruler5886 3 жыл бұрын
Doing T5 conversion on any foxbody is really straight forward whether it's a factory V8 or 4 banger so dont get overwhelmed. No aftermarket parts required unless you upgrade the clutch quadrant which I strongly recommend over the factory plastic crap Ford used
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Exactly! That was the only upgrade we did as well 👌
@tonyo3856
@tonyo3856 3 жыл бұрын
Cost to swap on average?
@someguyto4675
@someguyto4675 11 ай бұрын
@@BREW2LFOXBODY I want to do this with my 2.3 liter but the crossmember in mine is different than the aod. My transmission is the a4ld and im not sure how many times I had this out of this car. I was able to uninstall it and install it pretty easy the last time around. For now im just done messing around with this anymore. Since I want to redo the front seats and most of the interior I may as well go all the way.
@RegularGuyGarage
@RegularGuyGarage 3 жыл бұрын
Good overview man. I resist doing anything under the dash at all costs
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Same.... 😅
@justinsmith62
@justinsmith62 3 жыл бұрын
Ol Smokey up on the shelf. The peach is so good. Lol
@edgarserrano323
@edgarserrano323 3 жыл бұрын
Man I am happy mine came with a manual
@automotiveaddiction428
@automotiveaddiction428 3 жыл бұрын
My car is a junk yard special...everything is used..also cross fit..some car parts some truck parts...1 chevy part..could not find a washer bottle..old body kit that dont fit...but it will and I will still be able to keep it as a 4 eye.
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Love it 💪
@kevinbulatowicz5843
@kevinbulatowicz5843 3 жыл бұрын
I did it last spring. I opted for all new, LMR had a fantastic 1 stop shopping package. The only part I had to source was the pedal assembly which was easy to find and I paid like $25 for it. The absolute worst part was the peal assembly hahaha.
@GameOver321
@GameOver321 Жыл бұрын
How much was the kit? Any issues?
@kevinbulatowicz5843
@kevinbulatowicz5843 Жыл бұрын
@@GameOver321 right around $3200, came with absolutely everything necessary except the clutch pedal assembly. All quality parts.
@ponypwr
@ponypwr 3 жыл бұрын
I see the rc cars.... lets see a video with them rippin!
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
I need to get them out soon 🤔
@chrisgarcia7883
@chrisgarcia7883 3 жыл бұрын
@@BREW2LFOXBODY I was thinking the same thing
@roygustafson7729
@roygustafson7729 3 жыл бұрын
I have a JRX-PRO that I converted to a street truck with low profiles. I had to make the front axle to hold truck tires 😁 its caught air riding a rolling Wheelie.. that's how you started into Mustangs
@GearHead704
@GearHead704 3 жыл бұрын
I enjoyed the coverage of this. Plan on doing one myself some day.
@Stephen_garza
@Stephen_garza 11 ай бұрын
I have a car you can use 👍😅
@BuiltVSBought
@BuiltVSBought 3 жыл бұрын
Always great info from this channel
@JKWilson61
@JKWilson61 3 жыл бұрын
Notice a trend in crappiest jobs to do to a Fox? Seems like they all involve the dash (clutch pedals, heater core) ☹️
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
You ain’t never lied! Lol
@iammalloy
@iammalloy 3 жыл бұрын
that def made driving it fun now at the very least!
@rodcognito002
@rodcognito002 3 жыл бұрын
I jumped in a truck hit switch fired right up. Grabbed the auto trans shifter on column went hit reverse and WHAM I was in the wall of the shop. Had 4spd swap in it. Cost me 300 in parts to fix customer's vehicle. I was a little upset.
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
👀..... oh damn. That’s why I like the neutral safety swift right there. Sorry to hear that brother
@paulhudgins5120
@paulhudgins5120 3 жыл бұрын
Always great content, looking forward to the next project!
@MiturBinEsderty
@MiturBinEsderty 6 ай бұрын
Worth every penny. Auto foxbody Mustangs tended to be owned by women and older people. So the cars are in way better shape. Have lower miles and are cheaper. I paid 11k for a LX 5.0 convertible with 25k miles garages since new two owners. I’m not drag racing you can keep your 25 grand notch.
@HicksHouseVideos
@HicksHouseVideos 3 жыл бұрын
That speedo cable is dumb, that was one of our biggest problems.
@ross9644
@ross9644 3 жыл бұрын
Great video, thanks!
@justin91lx
@justin91lx 3 жыл бұрын
That's a clean coupe! The clutch pedal assembly sucks
@hondatech5000
@hondatech5000 3 жыл бұрын
had to come throw ya a like because ive done the pedal box before. Btw i have 2 pedal boxes and t5 swaps... all my ford crap is on fbmp
@bigskyab
@bigskyab 4 ай бұрын
Y'all forgot to mention the necessary installation of the cup holder ......how do ya drive a manual fox body while googling your address and drinking morning coffee?
@thetechfromheaven
@thetechfromheaven Жыл бұрын
I want to do this in a 91 XR7, hope to source all the parts soon!
@wwade72
@wwade72 3 жыл бұрын
I did the swap in my 1988 fox time consuming
@lamarcdesign
@lamarcdesign 3 жыл бұрын
I would love to have an aod vs that c3 that came with the car
@motorbrains88chris
@motorbrains88chris 3 жыл бұрын
I did this swap and the pedals were a pain in the a**
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Definitely a pain.....
@nolanbrady9305
@nolanbrady9305 3 жыл бұрын
Ok so the swap has already been done but I’m putting a bbk clutch cable kit in and I can’t get the piece that actually sits over the quadrant to come off because there is like a frame piece in the way so it won’t slide off
@dk2190
@dk2190 3 жыл бұрын
Just convert the harness under the driver seat
@thefoxchamber
@thefoxchamber 3 жыл бұрын
Good info bro.
@95turbostang21
@95turbostang21 Ай бұрын
My car is a 347 stroker 4r70w with 28oz external balance flexplate . 3 questions 1) So when im doing the swap from auto to t5 i would need to buy a 28oz ex balance flywheel for the clutch ?? 2) And my flexplate is 164 tooth but when looking up for a new flywheel they are 157 tooth is that ok 3) when looking on summits site i see they have a 10in diameter flywheel and 13.2in diameter flywheel now Do I purchase based off of the size clutch that I would go with
@KM-uw4ez
@KM-uw4ez 3 жыл бұрын
What about the ECM? According to Neomustangs, you need to change the computer or you will probably have some idle or drivability issues. Have you experienced anything like that?
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
You do not need to change your computer, the A9P from the the car will work just fine with the 5 speed. The A9L won’t work with the auto though.
@robertelmo7736
@robertelmo7736 3 жыл бұрын
@@BREW2LFOXBODY I don't think the Megasquirt either lol...I'm trying to go the other way, Tremec to AOD or possibly a new 6 speed F150 Auto lol...
@RRMOTORS88
@RRMOTORS88 7 күн бұрын
I did a t5 swap on my 92 mustang it does not go past 3k rpm in less I keep the clutch pedal in it revs perfectly normal any clues ?
@josedamiansolercarrillo430
@josedamiansolercarrillo430 Жыл бұрын
Saludos desde España, mi foxbody automatic y haré change a t5
@curtissanchez8555
@curtissanchez8555 3 жыл бұрын
Soon I’ll be doing the swap. Installing a Tremec 3550. Do i use the same pilot bearing as if i was installing a T5? Anything you can think that i should keep in mind installing a tremec 3550?
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
The pilot bearing should be the same as far as I know. Nothing out of the ordinary I can think of 👍
@curtissanchez8555
@curtissanchez8555 3 жыл бұрын
@@BREW2LFOXBODY Over all, great videos. Thank you.
@89gt5.0
@89gt5.0 3 жыл бұрын
Installed a3550 in mine years ago.had to modify the cross member like he said to make it fit. Its considerably larger but fits fine
@curtissanchez8555
@curtissanchez8555 3 жыл бұрын
@@89gt5.0 thank you
@jstyles510
@jstyles510 Жыл бұрын
Hello @BREW2L! Question, when cutting the transmission tunnel, do I need the transmission tunnel hump kit from LMR? I feel that I don’t need being that my cover already has a shifter boot cover from a 5 spd Notch. Thanks in advance 💪🏽
@rodneyhickman1630
@rodneyhickman1630 3 жыл бұрын
I have a 1988 fox body GT convertible with an automatic want to switch to a 5 speed how much do you charge
@ThatGuyWithTheFords
@ThatGuyWithTheFords 3 ай бұрын
Hey man! I’m starting this swap on a 93 with a 4cyl. Is it the same process as the 5.0? Any help is appreciated!
@Chad-Dion
@Chad-Dion 3 жыл бұрын
I hear all sorts of stuff on ECU swap for a 5 speed. Idle issues etc. Didnt make any sense to me but thoughts ?
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Never had an issue using the stock A9P with the 5speed personally
@Chad-Dion
@Chad-Dion 3 жыл бұрын
@@BREW2LFOXBODY I always thought that did not make any sense... but never actually did it.
@sav22rem22
@sav22rem22 3 жыл бұрын
In my experience it typically doesn’t matter. Just gotta make sure your o2 harness is pinned out right
@ericbarr6812
@ericbarr6812 3 жыл бұрын
Man that's funny called Andrew's car weak!
@scottharvey3054
@scottharvey3054 3 жыл бұрын
Clutch pedal is worse than doing a heater core !
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Agreed 👀
@scottharvey3054
@scottharvey3054 3 жыл бұрын
@@BREW2LFOXBODY lol, swapped my pedal assembly when I did my 5 lug conversion- had column out at the time... cobra brake booster is more of a pain than the pedal box and the heater core !
@Shakerhood69
@Shakerhood69 3 жыл бұрын
@@scottharvey3054 Sometimes when l look under the hood of my car l wonder how l got that damn Cobra Booster in there!
@scottharvey3054
@scottharvey3054 3 жыл бұрын
@@Shakerhood69 no doubt.... but the benefits of having better brakes were worth the struggle !
@Shakerhood69
@Shakerhood69 3 жыл бұрын
@@scottharvey3054 I think Cobra brakes have been one of the best Mod's i've done to the car!
@MACofallTRADES707
@MACofallTRADES707 5 ай бұрын
Did u change the computer ?
@Mattys91gt
@Mattys91gt 2 жыл бұрын
I wish I could do this to my aod it does have a shift kit I was told but I need to learn how to do rear axles please anyone in Massachusetts near Cape cod please help me just fixing the car
@austins5955
@austins5955 Жыл бұрын
Hey I have a T5 swap I’m doing and it came out of a SN95 v6 car do I need an SN95 bell housing for the 5.0 or the fox bell housing?
@pabloo5.0
@pabloo5.0 2 жыл бұрын
Can I use my aod computer (a9p) when swapping over to a t5 or will I have to swap to a a9l computer as well?
@BREW2LFOXBODY
@BREW2LFOXBODY 2 жыл бұрын
A9P will work just fine 👌
@kevin92foxbody67
@kevin92foxbody67 3 жыл бұрын
Man I want to do a t5 swap in my 92 soooo bad! But its mostly all original and physically can't do it my self 😞 I broke my back n just can't bend that way..maybe I can bring my fox to you guys for that??? I do really need help 🙏✌✌
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Sorry to hear about your back Kevin.. definitely makes doing things 100 times more difficult I’m sure. I wish I could help you out but I just don’t have the time to work on anyone’s else’s car.
@kevin92foxbody67
@kevin92foxbody67 3 жыл бұрын
@@BREW2LFOXBODY nothing new to me..but I appreciate ya anyway ✌✌
@schwarry1
@schwarry1 3 жыл бұрын
Is it a good idea to replace the rear main while your at it?
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Absolutely.... 👍
@TrentonLeeEntertainment
@TrentonLeeEntertainment 3 жыл бұрын
Hey boys whats a good set of coilovers that wont break the bank too bad?
@hobbs0798
@hobbs0798 3 жыл бұрын
So what does the steering have to do with dropping the trans
@quarans08
@quarans08 5 ай бұрын
the pedals
@josedamiansolercarrillo430
@josedamiansolercarrillo430 Жыл бұрын
Facebook y ves mu foxbody
@dk2190
@dk2190 3 жыл бұрын
You don’t need to pull the column
@brianmef71
@brianmef71 3 жыл бұрын
It would be funny if someday you did a 5.2L Voodoo engine swap. LOL
@roygustafson7729
@roygustafson7729 3 жыл бұрын
If it does Not fit.. you must spit😜
@dustinhastings1824
@dustinhastings1824 3 жыл бұрын
Yes easy swap getting under the dash sucks worse when your a fat guy haha but not impossible
YOU HATE AUTO FOXBODIES... But Hear Me Out!
12:08
BREW2L
Рет қаралды 32 М.
A9L vs. A9P computer on a Manual Transmission Foxbody Mustang
17:21
Leech Motorsports
Рет қаралды 10 М.
ISSEI & yellow girl 💛
00:33
ISSEI / いっせい
Рет қаралды 24 МЛН
Ik Heb Aardbeien Gemaakt Van Kip🍓🐔😋
00:41
Cool Tool SHORTS Netherlands
Рет қаралды 9 МЛН
SPILLED CHOCKY MILK PRANK ON BROTHER 😂 #shorts
00:12
Savage Vlogs
Рет қаралды 49 МЛН
هذه الحلوى قد تقتلني 😱🍬
00:22
Cool Tool SHORTS Arabic
Рет қаралды 44 МЛН
First drive after swapping our fox body from T5 to AOD!
10:11
Foxcast Media
Рет қаралды 21 М.
How To: Mustang AOD to T5 Transmission Swap - Part 5 (1984-1993)
9:11
Late Model Restoration (LMR)
Рет қаралды 40 М.
Fox Body Mustang TKX Swap and Aluminum Flywheel Upgrade!
11:58
Classic Industries
Рет қаралды 2,4 М.
Automatic to Manual Gearbox Swap in 8 Minutes!                            Corolla AE110 5A-FE Engine
8:37
93% Of All Foxbody Mustangs Available Are Like This - Or Worse...
22:39
QUICKLY find FOXBODY issues using this simple approach
12:41
ISSEI & yellow girl 💛
00:33
ISSEI / いっせい
Рет қаралды 24 МЛН