I'M TOO TURNT UP //// Built AOD With 4r70 Internals

Рет қаралды 22,999

2 жыл бұрын

We finally got the new transmission in the foxbody. AOD with 4r70w internals. We had to make some changes to the TV cable in the next video along with a governor change to fine tune the exact wide open throttle shift points.
#4r70wfox #aodfox #firstdrive
WANT BREW2L DECALS? www.shopbrew2l.com/
LINK TO SHIRTS: / @brew2lfoxbody
#SHIFTKIT #FIRSTDRIVE #AUTOFOXBODY
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.to/BREW2L
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.com/user/1271816...

Пікірлер: 175

@autofox5.067 2 жыл бұрын

Im really glad to see some AOD content! Its good to see that you are enjoying it. As my name implies Im rocking an AOD myself and its promising to see that you can still have a cool car even though its an auto. While the temptation is always there to switch to manual its good to know theres nothing wrong with being a little different than most.

@BREW2LFOXBODY 2 жыл бұрын

Oh absolutely man! Nothing at all wrong with a nice auto car. 🫡

@midnight347 2 жыл бұрын

With these cars it's different being auto with newer mustangs it's different being manual everybody jumped on that 10 speed band wagon lol. I prefer a stick but you can Def make an auto run and make it fun much more than stock. The old autos suck bad stock imo.

@malcombailey8590 Жыл бұрын

Where can you get the parts to build one like that

@autofox5.067 Жыл бұрын

@@malcombailey8590 I purchased my parts from Monster Transmission. I would do some research first before ordering because you hear good things and bad. My experience was good however my delivery time was a little slow due to covid.

@malcombailey8590 Жыл бұрын

@@autofox5.067 thanks iv heard bad about there trans also but I actually was looking into one of there kits.

@MrStangdawg 2 жыл бұрын

My Lentech AOD rated for 800 Hp A well built AOD can take it with the proper build. Definitely add external cooler to keep fluid cooler.

@oscarvillarreal8951 2 жыл бұрын

Besides the typical C4 transmission... this is the 1st AOD transmission in a Fox that I have seen with details 😭 !!! What a miracle in FORD history🙌!!! It's going to rain 💧☁☔🚿!!!! I'm going to be using my spirit fingers from the movie "Bring it on!" For this Miracle "👋"

@paulhudgins5120 2 жыл бұрын

Just so awesome Bud, you have a kickass trans now. She sounds so great shifting, the response is amazing. That what a former owner of 2 foxbodies W/AOD would crave to get. Man I am so excited for you, this is exactly what the Carbon Fox needed.

@BREW2LFOXBODY 2 жыл бұрын

Thanks! It’s exactly what I needed👍

@garyvanhoosier2472 2 жыл бұрын

Awesome!! I hope this comes to be a package he offers!! I see a need for one of these in my future!! Great job!!🤘👍

@BREW2LFOXBODY 2 жыл бұрын

I hope so as well. It’s going to depend on parts availability and his workload

@garyvanhoosier2472 2 жыл бұрын

@@BREW2LFOXBODY nice ! Looking forward to see this happen, please keep everyone updated ! This mustang community is awesome , so much great info. Thanks ! 🤘👍😎

@ryanpatrick3347 2 жыл бұрын

I've had automatics through the years and never had an issue now with boost I love it. Nothing wrong with 2 pedels

@BREW2LFOXBODY 2 жыл бұрын

Agreed ✊

@jimmyjamesgarage3290 2 жыл бұрын

What a 🌎 of difference with that transmission! It really woke the carbon fox up. Can't wait till the next video when you thrash on it. 👍

@ogsuperflygarage 2 жыл бұрын

My hats off to Mr. That transmission looks brand new and it shifts so smooth! Good work on the install my Brother! 🙌🏾💯👊🏾

@BREW2LFOXBODY 2 жыл бұрын

Thanks brother! Mr Grant did a fine job

@mji387 2 жыл бұрын

Wow… looks brand new & most important it’s running good

@BREW2LFOXBODY 2 жыл бұрын

Thanks bud

@tha_black_merc5585 2 жыл бұрын

Building my trans very similar, except I have a SilverFox SPT-MVB. Full manual with OD on a switch. Can't wait to try it, especially now!😁😁

@VictorSanchez-kp9nt 2 жыл бұрын

Yes I would like to switch to a built aod good job with. The carbon fox is my favorite.

@joe5.097 2 жыл бұрын

My first fox was an aod. Put a b and m 2400 stall with shift kit. Just fbo 390 gears. Kicked some ls1 ass back in the day

@tylerrhoton9983 2 жыл бұрын

As an Amsoil dealer myself. Great to see you using the best!!

@robertwhite9232 2 жыл бұрын

Love the AOD!!! Mine has one too, just waiting for mine to poop out so I can get a decent one!!! Thanks for keeping us all motivated, I look forward to every video!!!

@BREW2LFOXBODY 2 жыл бұрын

Thanks Robert! 🙌

@B-Rad9469 2 жыл бұрын

Awesome job! Not an AOD guy myself, but this might just change my mind. Can’t wait to see it in stabbing action! Great content as always!!

@mustangjoe2066 2 жыл бұрын

Gets boring, i would rather have a 5 speed,more fun,had a few aod one is they dont last!especially with the tv cable going out of adjustments,two is the price of a good aod is easy $3,000+++ not the junk boxs on ebay.me personally, 5 speed, 410,a little shot of spray besides the cam,exhaust, suspension etc.fun weekend car.if i want a drag car aod

@brokentoolgarage8609 2 жыл бұрын

Nice, it is good to see automatic content! I use the Lubeguard kooler kleen to blow out lines/coolers

@StratTone 2 жыл бұрын

Very interested in this transmission

@STXDrIvEr98544 2 жыл бұрын

I'm happy for you brother, finally got a solid trans setup in her! She is going to be a blast daily driving and cruising around. And with plenty of room to grow on that trans you can throw anything you want at it horsepower wise and it'll take it, can't wait to see what blower you go with!

@oscarvillarreal8951 2 жыл бұрын

Can you play with the shifts with the 4R70W? I know he put a Valve body in it which might help. How much HP can it take?

@cloucks1003 2 жыл бұрын

So happy the trans is doing well!

@knowwes 2 жыл бұрын

SOUNDS AWESOME

@BREW2LFOXBODY 2 жыл бұрын

Thanks brother 🫡

@jamesgeorge4874 2 жыл бұрын

FYI, the W in 4R70W means wide, as in ratio spread, the AOD/AOD-E is a narrow ratio gearset . Great content.

@BREW2LFOXBODY 2 жыл бұрын

Good to know👍 thanks bud

@anthonygrebner 2 жыл бұрын

The meaning of W is correct the rest not so much. Ratios are the same.

@jamesgeorge4874 2 жыл бұрын

@@anthonygrebner yeah, it's actually a wider ratio than the AOD, the 75E has the same ratio spread as the 70W, thanks.

@KJsProjects 2 жыл бұрын

I would be interested in you kit. I'm planning on installing an AOD on my 79 with a 347 stroker build. Doing a street cruiser/sleeper.

@sweetassugar2076 2 жыл бұрын

Listen to Brew2l! Make sure you your dip stick is plugged in Lmao 😂

@thenine3171 2 жыл бұрын

Seems nice but listening to the rain fall was nice to it hasn't rained here in months

@BREW2LFOXBODY 2 жыл бұрын

We’ve gotten a lot of rain here lately and we definitely needed it.

@hotrodray6802 2 жыл бұрын

We got an unforecast 2/10 today @ 100* thermometer. Yesterday was 102*.

@lamarrichardson1782 2 жыл бұрын

Hell Yeah brother 👍

@BREW2LFOXBODY 2 жыл бұрын

Hell yeah ✊🇺🇸

@samsneed8852 2 жыл бұрын

So what about getting one of these transmissions?

@MustangGuy6501 2 жыл бұрын

Wow that sounds great love the shifts makes me want to keep mine an auto if I could get a 302 and one of those transmissions awesome job

@BREW2LFOXBODY 2 жыл бұрын

Man I’m loving this setup so far! It’s a nice change from shifting gears all the time.

@MustangGuy6501 2 жыл бұрын

@@BREW2LFOXBODY for sure but I love a 5 speed. but I do want to make it to where it's able to basically be a daily and yes shifting does get old but I just miss driving it, last time she was a daily was in 2010 lol

@novi306 2 жыл бұрын

Get a cheap bubble balancer for your tires. They do work great. I’m sure a lot of people would be interested in seeing tools like that shown on your channel

@davidcrowe9531 2 жыл бұрын

I’ve got a 4r70w that I’m doing in my fox right now with all the sonnax updates. Waiting on parts running GPZ friction with kolene steels. Run a manual valvebody.

@Adam-ri1vi 2 жыл бұрын

Oh damn I want one

@chrisbrooks556 Жыл бұрын

Which Grants Transmissions location is it that built it? Ive been researching this build. Would like to inquire about them building one.

@geneblankenship3016 Жыл бұрын

Got the same Wheels they're hard to keep balance they sling weights off for some reason and they're just hard to balance love the looks but that's what I found on them

@vrm86gt 2 жыл бұрын

That shifted good!

@BREW2LFOXBODY 2 жыл бұрын

It kinda took me by surprise honestly. I knew it would shift better but I didn’t expect that right of the gate.

@vrm86gt 2 жыл бұрын

@@BREW2LFOXBODY my car was aod wheni got it and had it rebuilt twice, once just stock rebuild, then second time with 3200 stall FTI converter and Silver Fox Valve body, mine never shifted like yours! Somtimes it seemed like it would almost skip over 2nd gear, so I said that's enough of that, Im swapping to T5! Now I kind of want to do a built C4 or Turbo 400 swap for drag racing!

@mikej9932 2 жыл бұрын

Badass 👍

@BREW2LFOXBODY 2 жыл бұрын

Thanks bud! I’m enjoying this one!

@mrtickles23 2 жыл бұрын

I just built my trans similar, its almost ready to drop in my 65 mustang

@ferdinandcuevas8457 Жыл бұрын

I'm interested in how Your Hybrid AOD is working out now that You have been using it for about 11 months and I would also appreciate any information that You can share with Me as to Your source and availability ! Thank You , Best Wishes 🇺🇲 🇵🇷 🦊 👍

@frank3stangs 2 жыл бұрын

Nice video!!

@jplperformance9073 2 жыл бұрын

I try and install my dipstick a few times a week lol

@BREW2LFOXBODY 2 жыл бұрын

👀✊

@hotrodray6802 2 жыл бұрын

Used to check the oil 3-4x a day. 😎

@jplperformance9073 2 жыл бұрын

Awesome video 👍

@BREW2LFOXBODY 2 жыл бұрын

Thanks brother!

@jplperformance9073 2 жыл бұрын

I still have the rack if you need it for Papa t's car

@therealfoxbodyaddicts 2 жыл бұрын

I need one of those! Now if we race I’ll get gapped lol

@BREW2LFOXBODY 2 жыл бұрын

Man the old one was slipping so bad I’m sure I would have gotten gapped 🤣

@therealfoxbodyaddicts 2 жыл бұрын

@@BREW2LFOXBODY lol

@d.collier_8280 Жыл бұрын

I’m interested in that. I have a AOD in my 85 F150, and I’m looking for a better shifting trans for it. My current one seems to shift to soon

@nathankipping784 2 жыл бұрын

Nice work! the direct drive shaft makes them shift instantly I like how it sounds and shifts with the Wide gear set too. If your ever interested in how the one piece shaft works in the AOD I can tell you it’s smoother and not as aggressive in its upshifts. So if your into the tire busting between upshifts than your better off with the two piece shaft. Thanks for the content once again good stuff.

@BREW2LFOXBODY 2 жыл бұрын

Thanks brother. My converter locks both shafts together. It’s kind of a hybrid in a sense from what I was told.

@awee5816 2 жыл бұрын

Would the stock input Shaft work well with the 4r70w?

@oscarvillarreal8951 2 жыл бұрын

@@BREW2LFOXBODY this is for a lock up converter right?

@nathankipping784 2 жыл бұрын

@@awee5816 Yes for the 4R70w but not with the AOD it’s weak and it will break much easier I know this from experience lol.. There is a 300m shaft for the AOD that is much tougher by far and will last.

@awee5816 2 жыл бұрын

@@nathankipping784 if the AOD was stock but with a stock converter would the 300m shaft fit perfectly in the Fox?

@BillyWillicker 4 ай бұрын

How is the shift timing? Do the 1-2 and 2-3 shifts happen at the same RPM at WOT? Part throttle? Minimum throttle? Likely not, and that is why the 4R70W gearset wasn't ever a really good idea for the AOD. The best AOD setup is to be set up for a conventional open converter(one-piece input and C6 converter is an example) and a good final drive ratio for the application. If you NEED the 4R70W gearset, install a 4R70W and get all the benefits of it with programmable shift points, line pressure rise, and TCC - it's become quite available and economical and is a better unit overall.

@keeslerbrown7399 5 ай бұрын

Awesome video! What are the prices on the hipo AODs from Grant Transmissions?

@billpace3489 2 жыл бұрын

Brew that trans seems to work real well. A little more peppy

@BREW2LFOXBODY 2 жыл бұрын

It’s amazing how much faster the car feels now.

@billpace3489 2 жыл бұрын

@@BREW2LFOXBODY yeah I know how that is when I built my wife's car. Went from 5 speed to a c4 reverse valve body that made it feel like it was a lot torqueier, more responsive. A transmission can make a big difference in these fox bodies

@zackjay71 2 жыл бұрын

Lol those hairy arms lol. Keep up thegood work

@JESSEPAVON Жыл бұрын

He man awesome video, i been wanting a 1987-1993 mustang and I’m set on a standard transmission but this automatic seems awesome. What trany would u recommend on a set up to run about 12s to 13s on the quarter mile. Thanks

@nigelthomas1223 2 жыл бұрын

Hey nice trans and video question where can I get a pan like that one

@bama_5.051 2 жыл бұрын

Brew2l did Andrew have a yard sale?LMAO... 👀👀

@BREW2LFOXBODY 2 жыл бұрын

He did sell the lightning ⚡️ 👀

@Projectpompeii Жыл бұрын

Can you put 4r75 internals in an aod case

@horsepoweraddict7199 Жыл бұрын

Why no long tubes? Are there any for this available or foxs with a 4r70

@pete1003 2 ай бұрын

Question? What kind of valve bodies in there and do you have a j mod done to it as well?

@sn95_capo32 2 жыл бұрын

What do you think it does on a 1/4 mile?

@WayneG504 Жыл бұрын

Do you still have to AOD shuffle to hold second gear?

@Jlwsilence 2 жыл бұрын

Looks like u wanna get on it so bad 😂

@BREW2LFOXBODY 2 жыл бұрын

I really did. Lol

@joemamastinks1611 Жыл бұрын

What parts were exactly swap internally in the aod ?

@user-dk2sh2lw3u Жыл бұрын

hi! are buyed aod with 4r70 internal like plug and play or you builded by yourself? i need to know how to assembley(

@MrBlackbutang 2 жыл бұрын

Lol. That’s how people burn up transmissions. Playing with the tv. Cable. This was common knowledge by 1990 . Thanks 4 showing ruin equipment.

@BREW2LFOXBODY 2 жыл бұрын

Tv cable adjustment is necessary.

@MrBlackbutang 2 жыл бұрын

@@BREW2LFOXBODY only with pressure gauge with a fine line. Not much more than factory spec . 1 or 2 psi more. Your money’time’trouble .

@bama_5.051 2 жыл бұрын

What did Andrew say when he found out he was on the thumbnail? LMAO

@BREW2LFOXBODY 2 жыл бұрын

He just laughed 😂😂🤣

@bama_5.051 2 жыл бұрын

😄😄😄

@kevinhurley9001 2 жыл бұрын

Best way to know if a converter is seated If you can’t get your fingers behind the converter when it is in then it’s seated

@VictorMarquez-vi9fg 3 ай бұрын

Hiw much is the package transmission

@5literfox89 Жыл бұрын

What rear gear?

@ls3183 2 жыл бұрын

Them mustangs don't like the rain

@faststang85 2 жыл бұрын

I won't build a early aod for the main reason the overdrive band is small and are prone to burning up and you can't use the larger aode/4r70w band because of the case. That thing seems pretty stout though none the less

@hotrodray6802 2 жыл бұрын

The mods are explained in the trans buildup video. The case has been modified etc for the new guts and hybrid valve body/ cable.

@dillonconrad1697 2 жыл бұрын

Will it say In overdrive at wot?

@hornkneekneegrow7942 2 жыл бұрын

Or you can buy a 1995-96 ford explorer 2wd transmission (not XLT) and it will bolt right up

@hotrodray6802 2 жыл бұрын

It's not as strong .... And you need a computer to run it.

@hornkneekneegrow7942 2 жыл бұрын

@@hotrodray6802 Monster beef kit, stand alone tuner (quick 4), Selector slenge Tps Harness. Terminator x Ecu etc

@cprgarage3206 2 жыл бұрын

BREW2L, stock input shaft? I'm planning to build my AOD in my '91

@BREW2LFOXBODY 2 жыл бұрын

Aftermarket hardened input shaft with custom lock up converter

@hotrodray6802 2 жыл бұрын

@@BREW2LFOXBODY so it's a different converter than you had. Ok👍😎

@colecullip7485 7 ай бұрын

Is it with the stock computer?

@KingRob 6 ай бұрын

How much hp can it handle?

@HavingCoffieWithMrSatan 2 жыл бұрын

Mr satan REEEEE REEEEE fast

@BREW2LFOXBODY 2 жыл бұрын

I don’t know about fast.. lol

@jonrobertson869 2 жыл бұрын

Can we get a video of how to correct the bouncing speedometer? My LX has the same issue as the carbon fox

@hotrodray6802 2 жыл бұрын

Check and see if your cable ends is slipping in the square holes

@BREW2LFOXBODY 2 жыл бұрын

It could be a cable issue or I’ve heard the magnets have issues as well.

@awee5816 2 жыл бұрын

WTF! AOD transmission on a Fox 🦊 😃!!! This is a New Content cultural breaker in the Fox body 🦊 community. That would be weird to see content on an AOD with an E-brake. I'm not sure if you can Use those for a Daily though. Another 🎊Surprise🎉 is to see someone install a transmission cooler radiator. There's no content on that for Foxes and the different types of AOD transmission coolers. Also a strong input shaft and the difference between stock, 2 piece, and 1 piece. What the difference between lock up and non lock up converters and shafts.

@bama_5.051 2 жыл бұрын

Seems very smooth.. just wait till u adjust everything out wow..

@BREW2LFOXBODY 2 жыл бұрын

I can’t wait! ✊😊

@bama_5.051 2 жыл бұрын

😎

@79beans347 2 жыл бұрын

Hey man did you drill a hole in the bellhousing so that you could turn the flywheel? Just curious, never seen anyone do that before

@BREW2LFOXBODY 2 жыл бұрын

Yes sir 👍

@79beans347 2 жыл бұрын

@@BREW2LFOXBODY may have to try it myself I always use the starter hole. Never seen that before but it does seem easier 😁 cool trick even if you wasn't trying to show it 🤣😂 Eye was watching 🤣😂

@xbgtjg66 2 жыл бұрын

i run a silverfox stp mac vb , no more tv cable to stress about , did you use the old converter without cleaning it out

@anthonygrebner 2 жыл бұрын

Silver fox site has a ton of info...a lot of questions in the comments section can be answered with just a bit of research.

@KS-89LX 2 жыл бұрын

Not trans related, noticed they mickeys stacked on the floor and seen other videos where you also had the nitto n555r2 which do you feel is a better tire?. I’m running the n555r now they at the end of their life.

@BREW2LFOXBODY 2 жыл бұрын

The MTs are definitely better but I prefer the 555s for wet weather and daily driving.

@KS-89LX 2 жыл бұрын

@@BREW2LFOXBODY thank you. I picked up a set of 17s from a 2000 GT to daily. I appreciate the feedback. I’ll go with the mickeys for the SVE’s Searching for a 12.9x pass hoping these will get me there or at least close.

@Mattys91gt 2 жыл бұрын

I need help adjusting my aod it has a aftermarket kick down cable

@hotrodray6802 2 жыл бұрын

Explained in trans video. I set wide open throttle then check the pressure at idle procedure as per video

@angelob2867 Жыл бұрын

I think the factory aod can handle 450 hp? Any idea what this one can handle?

@michealgray533 4 ай бұрын

if ford is to be believed 700ftlb of input torque is what the 4r70 rated at so id say around that

@maddog716 9 ай бұрын

How much did it cost you for that transmission build if you don't mind

@BREW2LFOXBODY 9 ай бұрын

Around 3k

@feellnfroggy 2 жыл бұрын

Why'd you drill the trans. Isnt there an inspections cover for unbolting tc?

@hotrodray6802 2 жыл бұрын

Turning using the starter ring gear.

@feellnfroggy 2 жыл бұрын

@@hotrodray6802 I know what the purpose was, I’m curious why he drilled it when the bell housing has an inspection port for just that purpose.

@TheSlim93gt 2 жыл бұрын

Where are the subframe connectors?

@BREW2LFOXBODY 2 жыл бұрын

We have a set coming soon for this car. But if I’m being honest… it’s not a modification I worry about very much on a street car.

@TheSlim93gt 2 жыл бұрын

@@BREW2LFOXBODY Use Maximum Motorsports. You will feel a difference.

@ajcates9136 2 жыл бұрын

Anyone know where I can get a convertible top you know a good quality one ☝️

@autofox5.067 2 жыл бұрын

Wheres that seatbelt Andrew? Lol

@BREW2LFOXBODY 2 жыл бұрын

You know kids…. 🤷‍♂️🤣

@chrishearst3324 2 жыл бұрын

@@BREW2LFOXBODY what would be the price range for this type trans brother?

@imakeituptoyou 2 жыл бұрын

No chirps?

@BREW2LFOXBODY 2 жыл бұрын

The converter soaks up some of that. Plus we opted for the less aggressive shifts.

@imakeituptoyou 2 жыл бұрын

Makes sense. I don’t know the engine combo but what stall are you using? Sorry if it was already mentioned in the video .

@hotrodray6802 2 жыл бұрын

@@imakeituptoyou 2400

@joe5.097 2 жыл бұрын

Should of went higher at least 3k stall

@hotrodray6802 2 жыл бұрын

Increased power later will increase the stall

@BREW2LFOXBODY 2 жыл бұрын

Exactly ✊

@ThirteenToOne 2 жыл бұрын

eh... automatics are for.........

@drewsharpe7484 3 ай бұрын

That precision converter is garbage

@BREW2LFOXBODY 3 ай бұрын

Absolutely not. Don’t spread misinformation on my channel

@FrankA-973 2 жыл бұрын

Your to old to say turn up 😂

@BREW2LFOXBODY 2 жыл бұрын

Never!! 🙌😆

@hotrodray6802 2 жыл бұрын

LOL.... From in here looking out it still looks like 1988. .... That damn mirror 😱😱

@onetransmission7871 2 ай бұрын

After 56 years on the bench I'd have to say this appears to be a complete phony video. You can fool the general public but not a rebuilder. You and Sponge Bob need more Crabbie Patties. Please don't make any more bs videos.