BMW 1-Series rear bulbs replacement (E81 E87 LCI)

Рет қаралды 36,158

7 жыл бұрын

How to replace rear bulbs in BMW 1-Series cars (E81, E87). Access rear bulbs in your car to replace blown ones.
More at mr-fix.info/
Facebook: / mrfixpl
Instagram: / mrfixpl
Pinterest: / mrfixpl
Instructables: www.instructables.com/member/m...

Пікірлер: 17

@gamefoorum 5 жыл бұрын

Nice video mate , I have BMW 118d e87 2005 , want to order reverse light and rear lights and lights inside and change from stock to led can bus ready . I've saw on Amazon that there's tons of models , is there any specification or connector to look for ? Thank you !

@WS-tx8lv 2 жыл бұрын

Obrigadoooooo!!! 🇵🇹🇵🇹🇵🇹

@iwillnoteatzebugs Жыл бұрын

thanks

@chickenwarlord5795 4 жыл бұрын

Hey, first of all do you have halogen or xenon? Secondly, if i put a led bulb on that empty space at 1:15 will black bars effect appear or do i need to do something else?

@sidshekar 4 жыл бұрын

0:24 which one is the reverse light cable? I am trying to install a reverse camera so I have to hook it up to the reverse light. I am not getting any help online to tell me which one is the positive and ground for the reverse light. thanks!

@mrfixpl 4 жыл бұрын

If you are going to tap into car wiring I strongly recommend using multimeter or power probe.

@sidshekar 4 жыл бұрын

@@mrfixpl Thanks for the reply! Oh ok So I put the car in reverse and check for which wire is positive and which is ground. But I saw somewhere that stop lights are also be ground when no current is going through them.

@mrfixpl 4 жыл бұрын

Most likely all bulbs share one of the lines. For example ground can be common for all bulbs, and each bulb is operated with separate positive signal. You can also trace the circuit from the bulb to the connector to check how it's operating. Or you can look online for wiring diagrams for your car.

@sidshekar 4 жыл бұрын

mr-fix thanks!! I’ll give it a go!!

@germancarfan 2 жыл бұрын

Anyone have a bulb list for this?

@clapperfool 5 жыл бұрын

can LED be put there?

@mrfixpl 5 жыл бұрын

Sure. You would have to use one with load resistor (so-called CAN-BUS ready) or you have to code out circuit check to avoid dashboard warning.

@clapperfool 5 жыл бұрын

mr-fix ooh nicee, thanks for the quick answer :)

@Alteriukas 7 жыл бұрын

Why is there an empty slot?

@mrfixpl 7 жыл бұрын

If you have rear LED lights then diodes are embedded in the housing. When installing the holder back in car, this empty slot fits connector that's on the back of the light.

@Alteriukas 7 жыл бұрын

Are we talking about same slot (1:17, bottom slot doesnt have light bulb)? Just making sure.

@mrfixpl 7 жыл бұрын

I'm talking about the closes to the amber indicator.