BMW E24 - Fabricating Complex shapes made EASY

  Рет қаралды 40,702

Yorkshire Car Restoration

Yorkshire Car Restoration

Жыл бұрын

In this video we show you how to repair complex rusted areas Easily with simple tools on the BMW E24 635csi , also check out our other E24 series on Mat Armstrong's E24 as we try and take it from rags to riches.
If you enjoyed the video, smash that Like and subscribe button & comment your thoughts down below. It really helps us out!
Check us out on Instagram - / con. .
Check us out on Facebook - / yorkshirecar. .
Check us out on TikTok - / yorkshirecarr. .
Check out the first part in this series where we show you around the car and our initial thoughts:
• Abandoned Datsun ...
Check out our 1980 Suzuki LJ80 restoration playlist!:
• Introducing our B...
Check out our other how to and rusteration videos:
Mk2 MX5 Rusteration:
• Can we Fix the Ru...
MX5 How-To videos:
• How to Remove a M...
Check out the little classic mini restoration!:
• Classic Mini
Check out our MX5 V6 Conversion!:
• MX5 V6 Build
We also have much more content on our playlists as well as big plans for the future!
---MUSIC---
All Music provided by Epidemic Sounds
www.epidemicsound.com
LUWAKS - Departing : www.epidemicsound.com/track/2...
LUWAKS - Sjangeli : www.epidemicsound.com/track/K...
CHILL COLE - Floating Leaf: www.epidemicsound.com/track/w...
LUWAKS - Into The Blue : www.epidemicsound.com/track/F...

Пікірлер: 123
@johnmarsh2078
@johnmarsh2078 Жыл бұрын
I am really enjoying this channel. These pros are doing the stuff I and my friends used to do 30 years ago on Cortinas and Hunters but with just hammers and oxy-acetylene. We got there but nothing like as stylishly and with our repairs needing more filler to true them up. Then again we had no shrinkers or stretchers (LUXURY), folders, rollers or cropper. "Tin-snip hand" was a regular condition and the 4.5" angle grinder was a super tool of our dreams.
@amxen1
@amxen1 Жыл бұрын
We all had the Cortinas . I think Steve's first car was a Mk 1 golf . Mine was a Datsun f11
@ivanfilipovic3296
@ivanfilipovic3296 Жыл бұрын
watching old body filler with rust get replaced with fresh sheet metal gives same sensation as binge watching blackhead/pimple/hair removal videos at 3 am, so good and once you realize what you can fix on your car you just can't stop
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Haha thank you I think :)
@stevenmackay9192
@stevenmackay9192 Жыл бұрын
You know what Steve. You are by far the best automotive fabricator on KZfaq by far. Awesome work. Thank you for the enjoyment.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
wow thanks Steve we do appreciate the support as it gives us the motivation to continue to make vids :)
@waynespears5664
@waynespears5664 Жыл бұрын
These repairs are done right better than the factory could build them the first time....................................Fort Worth,Tx.................United States
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thank you wayne :) bet you don't get as much rust all the way over to Fort worth :)
@johnharpin8039
@johnharpin8039 Жыл бұрын
Great job, good to see craftsmen with the skills and patience to produce such magnificent results.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thanks John it is very satisfying doing it :)
@hutchinson69
@hutchinson69 Жыл бұрын
I love how even the pro’s sometimes fire a tack on without their earth clamp attached. Makes it seem more achievable to the rest of us. Top work.
@Dadeets
@Dadeets Жыл бұрын
That music needs to be replaced with he A Team theme in the background! John ‘Hannibal’ Smith ….in da house! It is a genuine joy watching you guys work - I am totally hooked on this channel BIG TIME!
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thank you :) we do appreciate your support :)
@berndb.5097
@berndb.5097 Жыл бұрын
Nice to see that the E24 is getting better and better. Steve you are doing an excellent job 👌👌
@GeorgeEI7KO
@GeorgeEI7KO Жыл бұрын
Amazing the faith some lads have in fiberglass and a bit of filler. Nice repair Steve.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
they do but i guess its a period repair :)
@ToreDL87
@ToreDL87 Жыл бұрын
Cut'n butt racks up another flawless victory. Well done! And nice to see you got the bead roller fixed :)
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Its only a temporary fix until we can afford a powered bead roller :)
@ToreDL87
@ToreDL87 Жыл бұрын
@@yorkshirecarrestoration The powered ones are a really good bit of kit. But make sure you get one with a big jaw as the ones with small jaws can't do panels in the width you usually tackle! I've used them a few times before, now I'm looking to pick up a manual one same as yours (for ease of moving it around).
@StuSandman
@StuSandman Жыл бұрын
Tell you what, total respect for the miracles you guys seem to pull out the hat 👍👍👍
@paulmackay6376
@paulmackay6376 Жыл бұрын
This is addicting to watch, true craftsmen.....great job everyone.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thank you Paul :)
@davidhamilton218
@davidhamilton218 Жыл бұрын
You made it look easy 😂 having tried it it’s not! Bravo 👏 excellent work
@cliffludo6860
@cliffludo6860 Жыл бұрын
Bloody marvellous as per usual, keep up the good work!
@ethandevillier2699
@ethandevillier2699 Жыл бұрын
Love the channel. Top notch workmanship. I'm trying to learn to do this kind of body repair so i can restomod my 72 Dastun 240Z. My go to channels are your channel, Trev's Blog and Fitzee's Fabrications. Keep the awesome videos coming.
@neilbarnes3557
@neilbarnes3557 Жыл бұрын
Look on the bright side: at least it wasn't structural glass fibre :) Keep up the good work!
@russelblackwell6041
@russelblackwell6041 Жыл бұрын
Brilliant welding skills and shaping metal
@mikaeljonsson4686
@mikaeljonsson4686 Жыл бұрын
It´s something so enjoying seeing a true professional at work! 👌
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
We appreciate your support Mikael :)
@davidmckinney6577
@davidmckinney6577 Жыл бұрын
I love ❤️ watching you perform your magic 🎩 ✨️ I know that there's a tremendous amount of work in that line of work because I do it some and I have never seen anything like this channel its golden in my ways of thinking pure gold ❤️ I love it and I love to see such a high class of workmanship going into everything you guys do. I watched Ryan Sunday put the frame rail on mat Armstrong BMW and I loved it I wrote a big comment on it I still think that chassis rail belongs in a museum as art work it was beautiful I'm still thinking 🤔 about it and telling everyone about this channel its just the greatest thing ❤️ on KZfaq ever .take care Steve and Ryan and everyone who works there and I will be here watching..hope you all have a wonderful blessed week take care of yourselves.
@tonysmall3863
@tonysmall3863 Жыл бұрын
Cracking. Quality of workmanship you rarely see these days. Loving the channel 👍🏻
@Afrodizyak47
@Afrodizyak47 Жыл бұрын
Again Steve; THE RIGHT WAY about how it should be done! Love watching how you approach the task and give us the impetus to do likewise and perhaps not be to daunted by approaching how to eliminate tin worm.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thank you :) that is the aim of our videos and if we helped just one person we would be happy :)
@colinritchie1757
@colinritchie1757 Жыл бұрын
Superb as ever ,the amount of work that went into these two small pieces just extraordinary
@user-mx1yb3vx2g
@user-mx1yb3vx2g Жыл бұрын
Some quality welding there
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thank you :)
@user-mx1yb3vx2g
@user-mx1yb3vx2g Жыл бұрын
@@yorkshirecarrestoration think ill move down there or blackpool or london glasgow is a mess same way most off Scotland
@andrewthrossell4053
@andrewthrossell4053 Жыл бұрын
Been on my jollies Steve so playing catch up.excellent work.great fabrication.keep it going😊😊😊😊
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thanks Andrew :) will do :)
@danielferraro59
@danielferraro59 Жыл бұрын
i am living your vids please don’t stop this is my favourite channel ,… i diy this sort of stuff myself and i’m living this thankyou !!! atb Daniel 😊
@matsedin3727
@matsedin3727 18 күн бұрын
Wow! This is so inspiring. Im in need of ”corners” myself and This video was at great help and inspiration. Thanks.
@chrisgrego7359
@chrisgrego7359 Жыл бұрын
Nice work. Loved that vid nice to just watch u work with out the try to hard comedy and goofy stuff
@patrickburton6130
@patrickburton6130 Жыл бұрын
Brilliant, wish I know about you guys when I had my Sunbeam Alpine!
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
they are worth a few bob now Patrick :)
@paulbateman3001
@paulbateman3001 Жыл бұрын
Well another great video thanks Steve great workmanship
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thank you Paul its much appreciated :)
@gtibrian1978
@gtibrian1978 Жыл бұрын
nice craftsmanship, and good review without it being too long.. 😄
@craigmorgan4676
@craigmorgan4676 Жыл бұрын
Stunning work brothers!Love ure content!👊👌👊🦾🦾🦾
@slyonme
@slyonme Жыл бұрын
this guy is a legend..hopefully he is teaching his masterclass to the young fellas
@danijelcar5184
@danijelcar5184 Жыл бұрын
Nice repair on that rear corners😎👍
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thank you :)
@davidmccausland9063
@davidmccausland9063 Жыл бұрын
Super job u r doing
@MissChristineC1990
@MissChristineC1990 Жыл бұрын
Litterally fantastic to watch. Great tips for my wagon
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thank you Rachel :)
@keithfinnegan1865
@keithfinnegan1865 Жыл бұрын
Great job Steve, all the best
@robinfoster7597
@robinfoster7597 Жыл бұрын
Your work is top notch! Respect!
@leeopenshaw9302
@leeopenshaw9302 Жыл бұрын
Great job there Steve keep up the good work 👍👍
@gerrymcivor374
@gerrymcivor374 Жыл бұрын
Superb, again!
@bobfrankish8883
@bobfrankish8883 Жыл бұрын
Fantastic Steve, top job.
@aliveRaptor2929
@aliveRaptor2929 Жыл бұрын
A true work of craftsmanship👌
@amunarjoh
@amunarjoh Жыл бұрын
That's extremely well done..! 😮
@bashsharif8272
@bashsharif8272 Жыл бұрын
excellent workmanship
@craigshagey9999
@craigshagey9999 Жыл бұрын
Love the channel use guys have got some talent keep up good work nice c old cars getting love ❤️ they need 💪
@jeffhammond8969
@jeffhammond8969 Жыл бұрын
Repairs done right!
@TheDaf95xf
@TheDaf95xf Жыл бұрын
Evening Steve. Well you’ve pulled that one out of the bag nicely 😊 Ryan and you both have very different techniques but still achieve the same fantastic results 👏🏻🤩
@leofabbro456
@leofabbro456 Жыл бұрын
Hi Steve. Breaking down into simple shapes is the solution, but you still have to be a good welder. No problem for you.
@chrisbuckland8389
@chrisbuckland8389 Жыл бұрын
Top stuff as alway great to watch.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Glad you enjoyed it chris :)
@bmw_classic
@bmw_classic 10 ай бұрын
Great fabrication
@jimmypratt6450
@jimmypratt6450 Жыл бұрын
Absolutely brilliant , if people only knew what it takes too frabricate such a small part and respect the effort it takes + time 👍
@JohnHonda101
@JohnHonda101 Жыл бұрын
Lovely job there.
@georgetaylor3449
@georgetaylor3449 Жыл бұрын
Lovely job
@alecfraser1928
@alecfraser1928 Жыл бұрын
Hypnotic just watching fine workmanship. I am surprised how much of a gap you like to weld into.
@georgeclements2742
@georgeclements2742 Жыл бұрын
Nice work, as always. If there's rust in those parts, I bet there's plenty more to find.
@drumtochtyglen
@drumtochtyglen Жыл бұрын
As wonderful as ever Steve!
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thank you Eddie just underbody to do on this car now :)
@stevemcilroy9518
@stevemcilroy9518 11 ай бұрын
impressive Steve
@jamesconnors4297
@jamesconnors4297 Жыл бұрын
tidy work....
@williamkhatchell620
@williamkhatchell620 Жыл бұрын
Very nice work!
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thank you William :)
@Rob_Dingemans
@Rob_Dingemans Жыл бұрын
Great job removing all the bondo crap.
@my-ami-de3798
@my-ami-de3798 Жыл бұрын
Well done 👍
@tonigon5767
@tonigon5767 Жыл бұрын
Your work is beautiful and meticulous.
@ianhands9289
@ianhands9289 Жыл бұрын
Superb work Steve. These videos really are inspiring. Is that just a heavy grit sanding pad you use to grind the weld flat ?
@eliseviv
@eliseviv Жыл бұрын
Hi, Love the craftsmanship. When you are Mig-ing the small panels together, it appears to be a series of tack welds. Is this an artifact of filming, or is this what is happening (I do notice occassionally a half second weld) I presume the wirespeed is higher than would be a regular setting? Thanks again for such a fabulous video series.
@Afrodizyak47
@Afrodizyak47 Жыл бұрын
Yep it is basically a series of tack w/ stitch welds in order to minimise heat and distortion, Technique is to space pot a series of tack welds to set the sections in place and then use the cutting disc to open up the panel to finish weld. By working your way across the join from side to side, build a tack on the preceding one; wait till the weld bead just glows red and then add the next weld onto that. Sometimes you need to cool the weld with compressed air so as to keep the adjoining panel from too much shrinkage, Again it depends on the shape and size of the panel. In my limited attempth, I have used a higher than recommended setting, in order to get a penetration. I think Steve has covered this in some of his previous welds m but for a more in depth on this "cut and shut" technique, "Fitzee's Fabrications" has a few videos on it. I love watching YCR, Steve, Ryan and Crew, doing their stuff, as it is the right way to go about it.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Hi Brett I couldn't have said it any better than Brian has 👍 thank you Brian :) 👍
@oldschoolshaving
@oldschoolshaving Жыл бұрын
Amazing skill !!😮😮❤
@HarrySmyth-ru2rt
@HarrySmyth-ru2rt Жыл бұрын
Tidy job 👍🏼
@paiefilhofulinariabraz4752
@paiefilhofulinariabraz4752 Жыл бұрын
Show de bola parabéns meu amigo que Deus abençoe
@mikehewitt6484
@mikehewitt6484 10 ай бұрын
Enjoying the content 👍🏻 Better without the music 😱
@jamesward5721
@jamesward5721 Жыл бұрын
Todays job dropped in here is a Gen 1 1970's Hilux tub. It's Unobtainium to replace & is also in complete tatters. I already did most of the other panels on this vehicle, the doors, cab, etc etc - it has arrived piecemeal. Last big hurdle is the tub.. I have - tbh - not a clue where to even start - there isn't a rust free square inch. Everything is rotten. Only "Plan" I have is to get a mate with a big industrial blaster to blast the whole thing, go from there taking it entirely apart & rebuilding every individual panel, then put it back together. I'd rather face into 20 BMW E24's than one Hilux tub - they are a total nightmare when you delve into them. Blaster picks it up in the morning - say prayers for me.
@TheNorthernmunky
@TheNorthernmunky Жыл бұрын
I need to send my MR2 to you!!!!
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
We re doing a mk1 MR2 at the moment :)
@eightfivetwohk13
@eightfivetwohk13 Жыл бұрын
Brilliant job as always. That filler was enough to feed a family of 5. Have you ever used lead ?
@4caminos4caminos20
@4caminos4caminos20 Жыл бұрын
10/10👍
@karenmurray3098
@karenmurray3098 Жыл бұрын
bloddy amazing steve !!! how did you learn to do this stuff ?
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Hi Karen, thank you. I just started mending cars. I basicly learned myself as there was and still isn't anyone who will show how this kind of restoration is done, hence why we show people how it's done and how to do it :)
@karenmurray3098
@karenmurray3098 Жыл бұрын
@@yorkshirecarrestoration self taught!!!
@405_hive
@405_hive Жыл бұрын
Genius……
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thank you :)
@thereanimatedsage9949
@thereanimatedsage9949 Жыл бұрын
Great video but please leave out the glitchey effects in the middle of the video, it is very annoying and just not needed, but otherwise amazing work and video good job!
@simonabra1813
@simonabra1813 Жыл бұрын
What metal are you using? (Grade, thickness, etc - what should I ask for when ordering supplies?)
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
most external panels are 18 gauge and structural are 16 gauge :) just standard body repair steel :)
@sss-yz3lg
@sss-yz3lg Жыл бұрын
What gauge would be the metal that is being used.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
It's 18 gauge :)
@TK42138
@TK42138 Жыл бұрын
👏👏👏
@neilstandish455
@neilstandish455 Жыл бұрын
Why didn't you put one single tac weld on the inside of the piece that you made 🤔 only to grind off all the weld you put on the outside.😊
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
I'm guessing you mean why did I weld both side then grind down the outside. Doing this give enough metal/weld to put a radius on that edge and not leave the metal thin. If I didn't then when I put a radius on it there would be a possibility I would have ground through it.
@neilstandish455
@neilstandish455 Жыл бұрын
No I thought you didn't weld inside 👍
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
@@neilstandish455 ah nope. Deffo welded both sides :)
@SuperWayneyb
@SuperWayneyb Жыл бұрын
🤘😎🤘
@scottgm321
@scottgm321 Жыл бұрын
Do you ever stop and wonder if one of your ancestors was a blacksmith that made armor and helmets? How did they make all those amazing suits of armor when cardboard hadn’t even been invent yet?🤔
@user-ri5jk9ls7l
@user-ri5jk9ls7l Жыл бұрын
1 000 000👍
@vincentcasino2356
@vincentcasino2356 Жыл бұрын
This car fully restored is valued at over hundred thousand dollars
@lackodhr.5303
@lackodhr.5303 Жыл бұрын
🤗👍💯
@nikolasb2933
@nikolasb2933 Жыл бұрын
OK so say it took him 2 hrs to do that. What do you think that small part would cost? My guess is 150 pounds.
@bobfrankish8883
@bobfrankish8883 Жыл бұрын
I am currently restoring an E31, 840Ci, the E24 was kind of the forerunner. There are no parts like that any more, so you have no choice but to make them. But as an example, BMW made a rear wheel arch repair section for the E31, the last time I checked they were still available, wait for it, £1000 each side. I am currently having to re-make the radiator support panel, it is no longer available from BMW. It is the worst single panel I have EVER encountered. It is made entirely from bends, curves raised edges, complex holes, you name it. I have had to make it from at least 20 smaller sections of metal all butt welded together. The amount of welding and grinding is just insane. Steve and the guys are just sensational in my opinion.
@philrobinson8461
@philrobinson8461 9 ай бұрын
Should I be concerned that on some of the shots while welding you don't seem to be using a welding mask?
@T3glider
@T3glider 6 ай бұрын
Why does it seem like all the cars in England are decaying faster than the British Empire?
@atefelabed8365
@atefelabed8365 Жыл бұрын
I just don't understand why you do not speak or comment in your videos. It would make your content so much more interesting and educative to explain some of the stuff you do. Bizarrely, it seems the only videos where you talk a bit are those on Matt Armstrong's car!
@alimechs
@alimechs Жыл бұрын
Your channel is wrong it must be yorkshire coach works.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thabk you dosnt have the same ring though :)
BMW E24 - Rusty floor and jacking point repair.
27:11
Yorkshire Car Restoration
Рет қаралды 29 М.
WHAT THEY DON'T WANT YOU TO SEE  : How easy complex parts are to make.
23:57
Yorkshire Car Restoration
Рет қаралды 83 М.
🍕Пиццерия FNAF в реальной жизни #shorts
00:41
Чай будешь? #чайбудешь
00:14
ПАРОДИИ НА ИЗВЕСТНЫЕ ТРЕКИ
Рет қаралды 2,9 МЛН
TRY NOT TO LAUGH 😂
00:56
Feinxy
Рет қаралды 12 МЛН
BMW E24 : Fabricating the inner wing panels
26:11
Yorkshire Car Restoration
Рет қаралды 46 М.
1981 BMW 635 CSI Group 2 & Group A | Racing in 2023
6:36
Belgian-Motorsport
Рет қаралды 8 М.
BMW E24 Rear Arch RUST repair.
29:25
Yorkshire Car Restoration
Рет қаралды 51 М.
NOTHING LEFT of the Escort RS2000 after chopping the floor out
24:16
Yorkshire Car Restoration
Рет қаралды 18 М.
1971 BMW E9 3.0 CSi - Car Restoration
26:53
Car Restoration
Рет қаралды 944 М.
The Most Dangerous Tool I've Restored [Restoration]
34:29
Hand Tool Rescue
Рет қаралды 363 М.
I BOUGHT A BARN FIND BMW E24 635CSI
20:44
Mat Armstrong
Рет қаралды 1,1 МЛН
Easy Restoration of a BMW E24 Inner Wings / Fenders
18:21
Yorkshire Car Restoration
Рет қаралды 30 М.
Выбираем тачку? #шортс #топ #марьяна
0:17
Гидроудар на мерсе - спас деда Танком 300! #tank300
1:00
ТАНК ПРОТИВ ВСЕХ
Рет қаралды 2,5 МЛН
Подбор живого Матиза до 450.000р🔥 День 3
0:36
Kras-Подбор
Рет қаралды 1,9 МЛН