BMW E30 M40 Engine Restoration - Rebuild Time-Lapse

BMW E30 M40 Engine Restoration - Rebuild Time-Lapse | Part 4

Рет қаралды 143,039

Күн бұрын

Get 30% off a Shop Manual for Your Car: click.linksynergy.com/fs-bin/c... (Available for Most Makes and Models)
In this episode, we continue restoring the salvageable parts from the 316i's engine. I show you the new block and head that I stripped out of another engine I picked up for £50, which had covered 135k miles instead of the 270k miles like the original engine.
There's one more episode after this before the big rebuild. That episode will take place in a machine shop and show things like honing and skimming of the block and head.
Get updated injectors for your car! - bavarianwerke.com/
Thanks for watching. Subscribe for more!
#restoration #BMWE30 #engine
In-depth alternator restoration - • BMW E30 Alternator Res...
In-depth starter motor restoration - • BMW E30 Starter Motor ...
Tools & equipment used:
Quartz Lacquer - goo.gl/8PTVKM
Base Coat Paint - goo.gl/mWhufG
Rust Remover - goo.gl/13gopW
Rohr 250 Welder - bit.ly/33mkOGP
Workbenches - arborgardensolutions.co.uk
Moldex Full Face Mask - goo.gl/NNYGrv
FGL 5 Spray gun - goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - goo.gl/cHTJS2
Colad Washable Overalls - goo.gl/3Css9E
Colad Mixing Cups - goo.gl/8DYmE8
Colad TurboMix Sticks - goo.gl/cYZfks
Colad Synthetic Paint Strainers - goo.gl/H79ZgL
Follow me on Social media to keep up to date with videos and behind the scenes.
My Patreon Page:
/ restoreit
My Twitter Page:
/ restore__it
My Facebook Page:
/ restoreitchannel
My Instagram Page:
@RestoreItChannel
PayPal Donations:
Restoreitchannel@gmail.com
Discord
/ discord

Пікірлер: 191

@ivanlipik 3 жыл бұрын

Just a recommendation, at 13:10 when using (hole punch?) put something soft underneath like wood or leather so you don't dull the punch.

@davidchang-yen1256 3 жыл бұрын

We use a high-durometer rubber plate at work.

@ulrichm 3 жыл бұрын

you can also use a plastic cutting board from Ikea for a few euro/pounds/dollars

@jacobmay7594 3 жыл бұрын

My man, invest in an ultra sonic cleaner. It will pay for itself in one build

@jessefoulk 3 жыл бұрын

The one particular thing he does for rebuilds I find interesting is the cleaning and re-Zincing the fastening hardware. That's really cool process

@mrpoki9 3 жыл бұрын

Damn that’s lookin good. Impressive how seamlessly everything fits back together.

@robertgoglis8841 3 жыл бұрын

Tip: at around 13:17 you are punching the holes with the gasket paper on the vise. This will definitely blunt your punch! Use wood or better yet a piece of Ertalon to put under the paper. Ertalon is hard enough to allow a good cut with 1-2 knocks AND soft enough to let the sharp edge go slightly through without damaging it!

@jamesca41987 3 жыл бұрын

Not sure why you don't have more likes on this comment... seen lots of mistakes in this video but.... aleast it'll look nice....

@pyro323 3 жыл бұрын

Good point Robert! It's like using a glass cutting board when slicing veggies. The glass will actually dull your knife over time because glass is harder than steel.

@anatolli1 3 жыл бұрын

Great video, but I think you put the fan clutch backwards :)

@RestoreIt 3 жыл бұрын

I did! haha.. All sorted now. Cheers!

@aarondylan5606 13 күн бұрын

@@RestoreIt 2 years later no rebuild? where is the video bro, we invested time

@GalvanizedGreatness 3 жыл бұрын

It’s the small details that count and take a long time to perfect but you make it look easy I envy that

@michaelskinner896 3 жыл бұрын

Beautiful job! It's most likely a lot more work to film this way, but this style of video takes me back to some of your original work. Close-ups, slow panning; I love it.

@1leggeddog 3 жыл бұрын

There's good potential for upgrades in the intake while you're in there!

@houseofno 3 жыл бұрын

I was hoping you hadn't forgotten the E30. I appreciate old Mercedes but I LOVE late 20th century old BMWs.

@RedsGarageUK 3 жыл бұрын

At £50, you got a bargain there! Good job as always!

@ezequielsilva2709 3 жыл бұрын

Dá gosto de ver uma restauração desse nível! 👏👏

@arnhemseptember2009 3 жыл бұрын

Looking perfect already!

@RestorationApprentice 3 жыл бұрын

Beautiful work! I love that warm grey color you use!

@USM247 3 жыл бұрын

Nice Work! As always, impressive.

@RestoreIt 3 жыл бұрын

Thanks Patrick!

@EP1CMINER 3 жыл бұрын

Didnt expect to be this early

@RestoreIt 3 жыл бұрын

Cheers dude!

@davebuts1921 3 жыл бұрын

Great work mate looks stunning.

@dane.1847 3 жыл бұрын

Love your attention to details.👍🏻👍🏻

@RestoreIt 3 жыл бұрын

Thank you Dan!

@user-my9dp7cy5t 2 жыл бұрын

внимание к деталям? он вентилятор собрал неправильно

@Pedro5antos_ 3 жыл бұрын

Awesome attention to detail! Congrats on the hard work and keep it up

@quentinrance8974 2 жыл бұрын

great work - I look forward to the next couple of videos.

@nickarko7468 3 жыл бұрын

Great Editing and content once again.

@davidlewis492 3 жыл бұрын

Brilliant stuff well done mate.

@Wolfiejohn 3 жыл бұрын

amazing job cant wait for more thanks buddy stay safe until next time

@dangerousandy 3 жыл бұрын

Very satisfying to watch.

@stusrestohut858 3 жыл бұрын

Beautiful job!

@electronic7979 3 жыл бұрын

Excellent restoration

@rahmanwang 3 жыл бұрын

Excellent masterpiece video.

@byronwilliams9994 3 жыл бұрын

Thank u so much. My m40 needs this as soon as I gt some time. Very good restore.u make it so easy n knowing I hv the same engine 💯👌😁

@70mmbobbyj 3 жыл бұрын

Nice work again.

@dillanmistry 3 жыл бұрын

Will the dirt removal contribute to advanced weight reduction? Anyways great work

@pyro323 3 жыл бұрын

Not really. It might shed a few ounces but nothng really worth celebrating.

@TheDazzaroo 3 жыл бұрын

Well done again nice looking job budd 👍

@tomswindler64 3 жыл бұрын

Great video as always,you keep out doing your self.😎😎😎👍👍👍

@gregsappington9991 3 жыл бұрын

Looking great

@chombi84 3 жыл бұрын

Great video 👍

@user-ix9uq4gz1j Жыл бұрын

Love the touring chassis, waiting for the next clip)

@gkanai 3 жыл бұрын

Love your videos. Have you seen all these new dry ice cleaning systems? They might be worthwhile to look at for future projects where you might not want to repaint something.

@felipin6665 3 жыл бұрын

Nor sure what’s more satisfactory: unmasking or sandblasting 😊. Awesome job

@ramzikahale3138 Жыл бұрын

you are prefect in assembling Bro...🤩

@johnhanson9245 3 жыл бұрын

Beautiful

@taimoorkhalid1565 3 жыл бұрын

Empressive job dude. The moment when u forgot to put the intake manifold gasket... You are doing great work I also love to restore cars I maintain my car by my own.... And thanks for uploading the video early as I demand in previous video.... Love from Pakistan...

@georgimihalkov4781 3 жыл бұрын

Amazing job, it's a joy to watch you work! Are there any videos of the 325s in the near future?

@ivanzakharov6951 3 жыл бұрын

Nice!!next part please)))

@RagnarIrving 3 жыл бұрын

Awesome video, like usual. One thing i did notice, i think you've mounted the fan differently to how it was.

@TheKAWATEAM 3 жыл бұрын

Well there goes my sleep again 😅👌🏻

@pascaljeske7307 3 жыл бұрын

Wow i Love it a very very good Job Love it ❤️👍👍❤️

@barneykennett9282 3 жыл бұрын

Very nice...👍.

@baitse7676 3 жыл бұрын

THe correct way to restore the manifold is vapor blasting. Dry blasting is creating pores in the casting.

@bavariansleeper 3 ай бұрын

This is terrific content and I'm very jealous of the space you have! Where are the videos continuing the build? I can't seem to find them for this engine?

@daniele780 3 жыл бұрын

Great job as usual!!! Do you have ideas on what could be your next project after you finish this?

@mustafamechanic1094 3 жыл бұрын

Man I love you so much l like this job its very nice good luck with your job

@CarsRestored 3 жыл бұрын

Me: No way he can restore this Restore It: Hold my engine

@dillanmistry 3 жыл бұрын

11:44 will use this on my future e30

@danielprivate7442 3 жыл бұрын

It seems like these days you have a more practical outlook about parts which should be restored and which ones should just be replaced.

@TheNorthernmunky 2 жыл бұрын

Marvellous

@StephenJohnson-jb7xe 3 жыл бұрын

Nice job, it looks really good. Have you ever considered soda blasting the throttle body, I think it would look as good as the rest of the assembly if you did.

@johnfazzari6208 3 жыл бұрын

Nice

@jamesca41987 3 жыл бұрын

Also I'd be interested after blasting and wire wheeling the gasket surfaces how far out of tolerance they are fromm flat

@cunninghamer 2 жыл бұрын

Or how much sand it ingested

@omarbarguesfernandez1641 3 жыл бұрын

Hacéis un gran trabajo, en general, muy buen contenido, he observado que habéis puesto las aspas del ventilador centrífugo por detrás del viscoso y realmente van por delante, aunque es un fallo menor, que pa todos los que hemos cambiado el viscoso alguna vez nos ha pasado o nos pasará!! Jejejeje

@robyncheong9809 2 жыл бұрын

please send me the link to part 5 and 6 of the rest of this restoration . it has been very helpful and this has been the most complete e30 m40 316i engine rebuild iv found on KZfaq and has been extremely detailed .

@ferfernandez9783 3 жыл бұрын

De 10 👏🏻👏🏻,pero cuando nos muestras un coche terminado

@alien_brain 3 жыл бұрын

dry ice blasting ftw

@PROxShAnT 3 жыл бұрын

Press like before watching ))

@nicolascolon9862 3 жыл бұрын

Hi! Nice video as always. I am curious about one thing. Do you need to do some kind of paperwork to get that "new" engine in your car and be streatable?

@handoyo5350 2 жыл бұрын

Cool 😎 We need update for this engine video's

@ozzyfreeman2619 3 жыл бұрын

So, I think it's was good idea save the old engine

@fvkaciv 3 жыл бұрын

I love watching these videos but it’s crazy to see how not easy bmw designed everything lmao

@francescoporpiglia650 2 жыл бұрын

Hello man, really nice restoration, grats! I'd like to ask you something: what kinda of passivating agent did you use after zinc electroplating? And what electrolite for zinc? Thanks in andvance for the reply!

@boxman139 3 жыл бұрын

Wow that Emmanuel guy sure has a lot of cars

@raf530i 3 жыл бұрын

No thread locker on the fan clutch screws? Brave!

@jannanos8739 3 жыл бұрын

Great job! Was there any need to clean the tubes, on which the injectors sit, from the inside? If so, how did/would you do it?

@jimleon7894 3 жыл бұрын

Beautiful work!

@IrishLion-re8bu 3 жыл бұрын

Project is coming along quite well brother. Anyway you could help me find one of those gasket tools kits? I do restorations as well and that would do wonders

@vagkos3060 Жыл бұрын

Nice video !! One quenstion what gap diid you set between then throttle plate and the housing thank you in advance !!!

@pyro323 3 жыл бұрын

There's some really good tips in the comments, Restore It! We can all learn from other people who have a little more experience than us.

@andrewedwards6548 3 жыл бұрын

I think I could honestly just watch a love camera feed of your workshop haha :) great work as always

@rallybmw 3 жыл бұрын

Another great episode! Love those in depth restoration and attation for detail! One little heads up. We have had an engine gone, because of some little particals that where left inside the inlet manifold. The only way to get them out, is by dipping them in a ultrasonic cleaner. Would be a shame to have your engine blow up after al this hard work of yours! But other than that, keep it up! 💪

@MAX_Belgium 3 жыл бұрын

what's the color on the intake manifold? is it the stock color? great video!

@takeiteasynacho 3 жыл бұрын

Yay!!!!

@RestoreIt 3 жыл бұрын

Enjoy man!

@muchamadsedickhartmann6318 3 жыл бұрын

hi what material did u use to make the gasket for throttle body and where did you order those injectors

@cranberrysmoothie1 3 жыл бұрын

You should get one of those laser cutters for gaskets, as many as you use it ought to pay for itself in a short time.

@houseofno 3 жыл бұрын

Have you priced a laser cutter for this application? Equipment like that tends to be extremely pricey. Which types of gaskets will it work with? Not all gaskets are the same. A laser cutter might not be a practical tool for every application. I am pretty sure that unless he is replacing a large number of these, and by sheer coincidence they all happen to be compatible with this laser cutter, if I were rebuilding just one or two cars at a time, buying an oem gasket is far more cost effective than buying some high tech and expensive equipment that will not see much use in a small volume workshop

@desobg 2 жыл бұрын

Do you need something else (different pressure regulator/fuel pump, ECU update ) when using M50/M52 injectors ?

@RJS027 3 жыл бұрын

awesome content, i see you use titan lube. are they any good i see them here by us and want to change from castrol to them on my e46?

@diyresttube 3 жыл бұрын

this require mechanical skills to restore this..god job bro..keep it up.

@thivesennayager6278 Жыл бұрын

When are the newer episodes coming out ? Is the car complete, and the engine? Great series and detail.

@RestoreIt Жыл бұрын

The car is currently as you see it in the episodes. The latest episode is being filmed as I type this. Cheers!

@ninakarenina1554 2 жыл бұрын

It would be perfect if you use vapor blasting instead of sand blasting. But good job guys

@497adam 3 жыл бұрын

Have you not thought about vapour blasting the alloy parts ?

@StachoWichura 3 жыл бұрын

W Polsce do Piaskarki wrzucamy nawet taki wentylator i Plastikowi nic się nie dzieje ;) a wgl..Polecam piaskarkę syfonową tą małą to se można hihi

@MangustaCBT 3 жыл бұрын

Have you the link also for the primer that you use?

@WesW3187 3 жыл бұрын

Is that light colour (I’m colourblind) the correct one for the manifold? I thought it would be silver or mat black. Nice work though.

@jamesca41987 3 жыл бұрын

Bro? Did you sand blast the injectors o-ring mating surface?

@jeffr0 3 жыл бұрын

17:47 I was waiting for the scene to turn red and start trembling @Geoffrey Croker!

@ioijiopjkiopjkp 11 ай бұрын

Where's the rest of this series?

@BonhommeLeBinome 2 жыл бұрын

What's about the end of the project, remounting everything in the engine bay?

@0304sony 3 жыл бұрын

Check the fan clutch, the installed position is wrong ( 5:20 to 15:55 )

@zevgoldman6769 2 жыл бұрын

How do you dispose of the plating solution once it is no longer fit for use?

@Pauloipadopalous 3 жыл бұрын

👍

@buraklevent7894 2 жыл бұрын

When will you publish final episode of e30 m40?

@fredrikkallgren57 Ай бұрын

Man I can’t find part 5 and 6. Are they out?

@tbruil7232 3 жыл бұрын

Did you media blast the fuel rail? Sounds like a bad idea

@jonathancostantini7189 Ай бұрын

hey, when episode 5 will come out?