BMW E36 | What Wheels Fit

Рет қаралды 85,850

4 жыл бұрын

Check out the E36’s in our fitment gallery!
bit.ly/3goEn8N
Explore Fitment Industries’ wheel selection
bit.ly/2YPE9Q6
Today Gels goes into detail on what size wheels will give you the desired style of fitment on your BMW E36. Anywhere from a tucked, flush, or an aggressive set up, FI has you covered!
Don't forget to subscribe - Fitment Industries Garage:
bit.ly/2WwOLEC
Be sure to check out the ESR Wheels for your E36:
bit.ly/337Ui7m
Also, be on the lookout for our BBS wheel selection :
bit.ly/30aMBf1
Browse our Nankang tire selection too:
bit.ly/39E7rWZ
We have plenty of suspension options as well :
bit.ly/2ChmsRw
Upload pictures of your car to our gallery:
bit.ly/2obqAZQ
Check out more videos like this!
/ fitmentindustries
#BMWE36 #CarMods #Fitment

Пікірлер: 101

@fitmentindustriesgarage5583 4 жыл бұрын

What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq

@zenas002 4 жыл бұрын

FINALLY IVE BEEN LOOKING FOR AN E36!! THIS IS PERFECT

@TheSlayer2015 3 жыл бұрын

"Uses a 5x120 bolt pattern" *Shows a center lock conversion*

@Chattsteezy 2 жыл бұрын

yeah for real wtf lol

@jerizzome 4 жыл бұрын

I've always loved how 5-spoke wheels looked on the E36, and those OZ Racing wheels hit it right on the mark for me

@fitmentindustriesgarage5583 4 жыл бұрын

Same here!

@Kev27RS 3 жыл бұрын

Just a shame that it doesn't have the center caps...

@3vimages471 3 жыл бұрын

And so much easier to clean.

@e36boy 3 жыл бұрын

316i sedan with a S52B32 AA supercharger stage 2 kit. Current wheel setup is Fifteen52 Turbomacs rally white 17x8 with 235/45 tires. My other setup is Volk Racing RE30 18x8 with 225/40 tires. Using D2 street coilovers with rolled fenders.

@bradcomis1066 3 жыл бұрын

1997 328is here. No fender rolling. 18x8.5 ET40 245/35R18 front and rear. Continental Extreme Contact DW. A teeny tiny bit of rub on the inner fender in the rear. Front and rear camber is -2*. Dinan lowering springs.

@johnogorman6372 3 жыл бұрын

I've a set 18x8f and 18x9r AXE EX10'S in Orange off my old E90 under my 36 saloon

@brandoninks264 4 жыл бұрын

This is the perfect video to end my day! The wife and I drove to East Troy, WI today to buy a transmission for my Chevy 305 swapped E36 drift car project

@fitmentindustriesgarage5583 4 жыл бұрын

LET ME DRIVE IT

@brandoninks264 4 жыл бұрын

@@fitmentindustriesgarage5583 definately when it's finished!

@Wonderboy_Adam 3 жыл бұрын

I own an e36 sedan. Running E34 Racing dynamic srl. 16x7.5 square with offset 13. Best feeling ever

@RichardFromageRacing 3 жыл бұрын

I just bought a set of RD GP’s that are 16x7.5 et13 for my E36. Definitely the perfect specs.

@jamesrossharry2230 3 жыл бұрын

I've got an 97 328ic hardtop. Been looking for new wheels lately. Thanks for the info. You got a sub outta me for this video alone.

@camdenwhitman8988 3 жыл бұрын

can i buy your hardtop off of you

@grad0n 3 жыл бұрын

17x9” SSRs et45 with 15mm spacer(so et30) and 255/40 Yoko AO52s.

@powdere4donuts 4 жыл бұрын

What size fenders would i need if i buy some 10x10.5 +5 4.5' lip front. 235/40/10 & 10x11.5 +5 5' lip rear. 245/40/18 Would also need 5x114.3 adapters

@theodoresteffens1238 3 жыл бұрын

nice video, i run BBS RK2's staggered 17's on my 95 m3. even got 255's in the back with some fender rolling

@lolsau 2 жыл бұрын

How about a lower ET lets say like 15-25 would there be any issues?

@theodoresteffens1238 2 жыл бұрын

@@lolsau its pretty tight how it is but as long as you shave down the tire i doubt there would be any issues

@reneboypantaleon9014 Жыл бұрын

How about 18x9 ET38? Would that fit awesome? Or I need to fender roll and pull?

@philipnzau3176 3 жыл бұрын

i need a setup for my bmw e39 and can’t decide on what to do

@wilsonkong2782 2 жыл бұрын

Wanted to confirm that the apex 17x9 with 225/45 won't require fender rolling?

@exp9873 Жыл бұрын

Will 8jx17 et20 with 215/45 tires work on stock suspension without fender rolling

@yungyasei5595 11 ай бұрын

i got a pair of work cr kiwami’s in 18x8.5 et38 but i still have to put 20mm adaptors on them so they will be et18… wondr if it’s gonna fit lmao

@mdvp2202 3 жыл бұрын

18” 9j offset 20 and 18” 10j offset 25 with 225/40 and 255/35 with camber kit and coilovers could work on an E46 4doors? I got this crazy deal on Facebook marketplace and I don’t know if I’ll work. Please help 🙃🤣

@11105angel 3 жыл бұрын

What wide body kit did that blue e36 have at 3:47 ?

@kemalyetis4899 2 ай бұрын

Bro sence ön tarafa ve arka tarafa en fazla hangi olcude takabiliriz bence on 225 45 18 arka 245 40 18 sence nasıl

@thedandy6765 3 жыл бұрын

can we get this for pandem e36?

@mazdarx7698 Ай бұрын

i want a set of 326POWER Yabaking for a e36 316i yes the cheapest e36 trim and model you can get doesnt matter but i needed this cus i couldnt figure my offset out

@Kugoi_Studios 5 ай бұрын

I want to put a rocket buny kit on mine, but I don't know what rims and weels fit with that kit, does anyone here know? If it's 18" better, For everyday use and possibly with air suspension

@squardo5548 3 жыл бұрын

My Touring fits no more than 8J ET40 with 225/45/17. ET35 would work if it wasn't for the TÜV, but without rolling the fenders anything else would scrape. Just in the rear tho, front looked like it would work out with the wheels further out.

@erikwagner5987 2 жыл бұрын

Servus, ich kann dir aus Erfahrung sagen, 8x17 ET20 passt mit nem 205/45R17 Reifen auch für den tüv. Fahr ich so mit orginalen Kotflügelkanten mit nem kw v1

@lolsau 2 жыл бұрын

How about a lower ET lets say like 15-25 would there be any issues?

@luxfreak359 Жыл бұрын

Da schleift doch nix oder hat deiner noch die alten radlaufkanten? Bei meinem touring fahr och als winterreifen styling 160 im 17x8 et34 mit 225/45/17🤔 mein radhaus hat aber schon die umgelegten kanten vom werk aus

@n3utical 2 жыл бұрын

best wheel for e36?- definitely oz hartge 17' 3tlg.

@uscp2 3 жыл бұрын

I know this chanel is called fitment industries, but would have been nice too see at least one setup where the tire would even fit the wheel. holy stretch...

@Kev27RS 3 жыл бұрын

Cool video! The orange E36 at the beginning could have steelies on and it would have the same effect as the ones "shown" in the video... 😂 #StopBlackWheels

@MultiTerpen 3 жыл бұрын

Style 21s😍

@darkotomic9685 3 жыл бұрын

What about r16 et20 7j off widht with 205/55/16 tire on factory suspension?

@user-il8yw5jb3p 3 жыл бұрын

Stock wheels on e36's have ET35-40 so you would probably have to roll the fenders

@rizkirahmatullah8588 4 жыл бұрын

danggggg finalyyu

@r129r16pfl 3 жыл бұрын

For e36 track day bro r17 9j all round

@MiguelSilva-ym2qc 3 жыл бұрын

Do this for the e30!!!!

@jimmystuck8969 4 жыл бұрын

In the intro, what are those five spokes with like rectangles on the edge. It’s the white wheel that’s two to the right

@keller7669 4 жыл бұрын

rotiforms

@thysaab7509 Жыл бұрын

my dad had 18/10in-the front and 18/11in-the back of the e36-1997

@arielkisara3197 3 жыл бұрын

hello i use same velg like that sedan blue e36 with 9,5 rear i want use toyo proxes 255/40 is it safe work

@fitmentindustriesgarage5583 3 жыл бұрын

245/35 is as large as we would recommend there

@hsingh630 9 ай бұрын

Can you fit 8x17 front and 8.5x18 on the rears without any issues? If so what kinda offset do I need to be looking at?

@imnota 7 ай бұрын

35 front and probably 40-45 rear, although you could always run more aggressive depending on the tire fitment and if you want to roll the fenders or not

@MarkaVar 3 жыл бұрын

e30 next maybe?

@Hatlegratzz 2 жыл бұрын

I been thinking of Watanabe's RS or jr19

@fitmentindustriesgarage5583 2 жыл бұрын

Both are dope! 🤘

@lamuerte7012 4 жыл бұрын

Do bmw e9x

@bobross6677 3 жыл бұрын

Thanks ill need this later after i buy the dead m3 near me

@bxgetup183 3 жыл бұрын

Plz do a bmw E39

@Lumel187 3 жыл бұрын

So I'm conflicted between keeping the wheels staggered or square them off. I see everyone squares their set ups but don't they come staggered for a reason? Help please ?!?!?

@Sphyn0x 3 жыл бұрын

They come staggered to reduce oversteer, safety reason. Squared is better.

@Lumel187 3 жыл бұрын

@@Sphyn0x oh yea I found out lol understeering is deff not it. Full sends with over steer only lol

@downhillfreak9798 3 жыл бұрын

Hi, What do you think about Styling 94 on a E36 Coupe? ;)

@thedandy6765 3 жыл бұрын

i got a question for you im about to buy a 318 with soft top convertable and ive seen some hard tops for it would you say it looks cool i think it does

@moshakra02 3 жыл бұрын

@@thedandy6765 yea man they're really cool, I have a 96 318 vert, just make sure you check the seals around the rear window for leaks n what not.

@klausbarbel7046 3 жыл бұрын

1.30 lisa yasmin's e36😍

@gravity718 3 жыл бұрын

What wheels are those

@versacecondoms1501 2 жыл бұрын

17x8.5 +41 on the rear, 17x7.5 +41 on the front, works?

@fitmentindustriesgarage5583 2 жыл бұрын

that should fit just fine

@jakob2049 3 жыл бұрын

Damn No sedans?

@adrianzieba6052 4 жыл бұрын

In Poland only wider steelies form Opel insignia :D

@kubawrobel6590 3 жыл бұрын

Not only ;)

@alexandertraficante5080 4 жыл бұрын

Currently running 18/8.5 ac schnitzers dropped on bc coils with the extreme low kit without rolling fenders very slight stretched 225 Bridgestone potenzas 🤷‍♂️

@Sami-hl6vy 3 жыл бұрын

Any pics?

@alexandertraficante5080 3 жыл бұрын

Sami watch @m3nace for full videos

@novandypramana 3 жыл бұрын

What about 9.5 at the rear offset 30?

@fitmentindustriesgarage5583 3 жыл бұрын

You can, but you’ll need to roll and pull your fenders

@novandypramana 3 жыл бұрын

@@fitmentindustriesgarage5583 i already rolled the fenders and camber a bit and i consider to use 235 40 18 for more strech, what do you think, 235 40 18 or 245 35 18 ?

@ybetz02 4 жыл бұрын

Kansei KNP!!!!!!

@Vanki4aAssetto Жыл бұрын

Work vs ss nardo gray best e36 I've seen

@Vanki4aAssetto Жыл бұрын

kzfaq.info/get/bejne/nZyqZrGastLOYXU.html

@rhar1044 3 жыл бұрын

If you put anything other than 17s and stock offset tire sizes on an e36 M3, it will ride like crap. It’s supposed to tip slightly forward for track use so if you lower the rear end it won’t corner nearly as well as designed.