Nice video. Just picked up a SSG 330i and planning to swap in a ZF 5 speed. Hoping I can reuse the OE flywheel with this trans but just now starting my research.
@TorquebrosDriftTeam Жыл бұрын
Thxs, yes you can reuse the flywheel 🤙👍
@y2ksierra Жыл бұрын
@@TorquebrosDriftTeam awesome. I already have the trans, linkage, driveshaft and pedals so it sounds like this should be a fairly easy and inexpensive one. Thanks for replying, it’s appreciated 👍
@a.t.g000 Жыл бұрын
@@y2ksierrahi mate what’s the best place to get parts for this kit? I’m going to manual swap my e46 aswell
@y2ksierra Жыл бұрын
@@a.t.g000 I ordered from FCP, schmiedmann and rock auto. Still haven’t done the swap, but will here soon once my E30 is done.
@a.t.g000 Жыл бұрын
@@y2ksierra oh yes mate thanks for that.
@ing.jhonnyromero Жыл бұрын
hello. Could you make a video showing the slower steps to do the programming in the DME or ECU. THANKS
@steezust Жыл бұрын
Hello , Great Video! I did have a question I wanted to ask as far as the transmission removal for the SSG goes. Is it fairly similar to either the Auto trans removal or Standard Trans? I am aware there are several components to the SSG mounted on the trans.. Do these come off along with the trans or are they things I need to disconnect and remove before taking out the trans?
@TorquebrosDriftTeam Жыл бұрын
hello, thank you, the ssg gearbox is very similar or identical to the standard gearbox ( manual ). the length is also the same therefore you can use the existing cardan shaft. all components in the ssg gearbox must be removed and are mounted on the gearbox, including the control unit otherwise there are error messages. the complete wiring harness of the ssg would also have to be removed but i have left it in my car. And yes first you have to unplug all cables from the ssg before removing the transmission
@phamee Жыл бұрын
Great video! Could use your knowledge on this hard to find point as I preplanning. For the reverse wiring, is it the same as an AT with a wire to the Blue relay in DME fuse box? Watched 50skid video and he just mentions coding. I couldn’t find any other resource on the matter. Appreciate any help.
@Cuprone Жыл бұрын
Good video i am interested in making the exact same change from ssg to manual. I have doubts about how to connect the wiring of the reverse lights. how did you do it? thank you so much
@alexionut44742 жыл бұрын
Hi, I have an bmw e46 330ci ssg and I want to convert to manual zf5speed, and the only thing I don’t know how to do the wires for it if you can help me or give an idea how to do it I really appreciate
@TorquebrosDriftTeam2 жыл бұрын
Hi, you don't really have to wiring anything, the signal for the reverse lights at the transmission you can use from the original wire harnness, all the another things you can code out with the INPA software, here a good video and chanel how to do it kzfaq.info/get/bejne/fM9ypZSZntCUkok.html If you have cruise control option you have to change the chlutch position sensor and wired new on the DME. In my case i don't have wired at the moment and it's the only thing is not working. This sensor you can also code out
@callumw8719 Жыл бұрын
How do you get rid of the rev hang when the clutch is depressed? Mine was converted from ssg to manual and this issue is very annoying😅
@Bluez_Clues Жыл бұрын
Needed a different driveshaft or re used? About to do this myself and looking some help! Not a lot of info out there on these. Thanks!
@steezust Жыл бұрын
You can reuse the rear half of the shaft but you have to replace the front because the manual driveshaft is longer than automatic , the manual transmissions are shorter than the automatics.
@rcw86___29 Жыл бұрын
solid
@kjellsonneveld1532 Жыл бұрын
Hi, hope you will still respond to this but do you need a new flywheel and gearbox bolts or can you just use the ones that came off the ssg and leave the flywheel as it is?
@TorquebrosDriftTeam Жыл бұрын
Hi, you can use the same flywheel and the gearbox bolts. In my case i leave the clutch and the press plate too, but the clutch pedal its to hard to press, in future i must chance this too from e factory 330i or something similar
@gorlovka5740 Жыл бұрын
Hey, hope you will still respond to this but i swapped my e46 330i from ssg to manual but it won’t start. Is this a problem with coding the car? I saw a video of a automatic to manual and the guy said you had to splice the brake sensor wire and connect it to pin 8 of the little ecu that sits above the pedals. Do you know what this problem is? Hope to hear from you!
@TorquebrosDriftTeam Жыл бұрын
Hi, i'm not sure if you can do it this way. In my case i code the start/clutch signal in the ecu out, so you can start the car without pressing the clutch pedal . I hope i can help you
@gorlovka5740 Жыл бұрын
@@TorquebrosDriftTeam aaah okay, thanks for responding!❤️
@azjolol Жыл бұрын
Hey what'd you do with your SSG equipment? I have an SSG and I'm keeping it SSG. Looking for cheap donor parts, let's connect if you or anyone else has any of your pumps or clutch actuators or shift selectors!!
@TorquebrosDriftTeam Жыл бұрын
Where are you from? I have all the stock SSG equipment and i want to sell it as a package with the gearbox, send me a private message for more details
@finessedyawife4915 Жыл бұрын
Did you have to do any modifying under the car for the transmission? And also did you have to code anything out
@namkinh69372 жыл бұрын
Where can i buy this manual transmission? My country does'nt have this tranmission?
@TorquebrosDriftTeam2 жыл бұрын
Hi, i can't tell you where you can buy a ZF 5 speed transmission, you need a donor car, maybe on a junkyard or ebay. The ZF was in many cars mounted. Good luck 1995-1999 E36 328i 1992-1999 E36 M3 2001-2006 E46 325xi 2000-2006 E46 330i 1990-1992 E34 525i (M50) 1992-1995 E34 530i (M60) 1996-2000 E39 528i (M52) 1996-2003 E39 535i (M62) 2001-2003 E39 530i (M54) 1994-1996 E38 730i (M60) 1992-1994 E32 730i (M60) 1995-2001 E38 735i (M62) 2000-2006 E53 X5 3.0i (M54) 1996-2000 Z3 2.8i (M52) 1996-2000 Z3 3.0i (M54) 1996-2000 Z3 M3.2i (S52) *Canada & USA only 2001-2002 Z3 M3.2i (S54)