I’ve always been afraid to think of buying a 325 or 330ci but with these vids I’ll be getting one as soon as I find the perfect candidate thanks for your vids man they’re a big help
@willk38074 жыл бұрын
I have a 2001 325i with manual transmission. New coolant hoses, thermostat, expansion tank, water pump, battery, vacuum lines, spark plugs, MAF sensor, k&n air filter, LED tail lights, LED back-up lights, LED glow kit, 32" LED light bar and it sits on 18" wheels. The body is in great condition with no rust or cracks in the rear sub-frame. $2,500 but I live in central Kentucky, USA
@EvronCoke7 жыл бұрын
It's funny I just did this job on my car today, still watching the video though😂
@deseancarter96434 жыл бұрын
Man I really wanted to see how that car sat once the coil overs were installed
@theonlyxa5 ай бұрын
Lots of examples online I could post mine if you wanna see
@amanjavaid932 жыл бұрын
DO NOT disassemble the struts without a spring compressor. There is so much pressure with those that it can seriously injure you. They call it a “live hand grenade” sometimes because of how much pressure there is.
@BradTraver7 жыл бұрын
I have been waiting for you to do a coilover video, this helped me so much!
@magradrift62714 жыл бұрын
Good explanation, I have never changed suspension before and will be doing it on my 330xi touring in January. Thanks for the help
@santiagocastaneda78174 жыл бұрын
Hey , what coilovers did you use , it’s hard to ring budget coils for awd models
@stephenfallis93745 жыл бұрын
Nice job thanks for making a complicating job. Into a excellent weekend project. This video has training style productions from start to finish. Cheers
@JeSuisBacon7 жыл бұрын
Man, I did the same thing as you - I installed the rear shocks without the shim and washer under the rear shock mount. Been driving around for 2 weeks with rattles from the rear. So annoyed now that I have to take it apart to fix it up.
@TacticalKeene6 жыл бұрын
Thanks dude! I was just about to do mine.
@mvilla46145 жыл бұрын
Do you have a link for the kit? I need this done to my e46, I would like to find it for a great price, I knw you always take price into consideration. Your videos are always a great help for me. Watching your videos is what gave me the confidence to work on my car myself. 😉
@michael_e46s215 жыл бұрын
Does anyone know what size is that swaybar link
@deity.467 жыл бұрын
I perfect!!! Just ordered some DGR coilovers last week!
@mike.135i6 жыл бұрын
how much did that set u back? how do they ride?
@thomasalvarez51437 жыл бұрын
Could u do a video on what obd2 scanners u use? And recommend a few for different things, which are better for bmw, etc
@samvhell91045 жыл бұрын
I use the bluedriver in my e46
@TheMaldenc5 жыл бұрын
Since STs and KW V2s are similar, I would imagine the V2 install on a E46 M3 is similar to this?
@xXGamester109Xx5 жыл бұрын
yes.
@TheMaldenc5 жыл бұрын
Well, I did the job last week and it's just like this with only minor differences. There's no sound deadening in the back of the M3 to be torn out. You need a shop to swap the tops for you on the fronts, unless you have a spring compressor. We took mine off, went to the shop and had them swapped in an hour. Lastly, have someone help you, it's infinitely easier with two people.
@Kingcustomz7 жыл бұрын
can you make a video about what it was like moving your business to a different state, and how did you get clients after the move? how much money did you save before the move? im thinking about moving to florida and moving my business there but im stuck and would like some advice.
@mworx64466 жыл бұрын
In your opinion what is the ideal brand and model for the most quality in the construction, build, performance and ride quality for the cost. This is an area where you don't want to be tight as you get what you pay for, and spending as much as you can is better than the usual spend as little as possible. So apart from the ST shown in the video, what do you like that ticks all the boxes
@vanceallinson34483 жыл бұрын
Hi there. Great video for the install. I have a 2000 E46 325Ci. What diameter is the front bottom shock absorber that fits into the knuckle??
@LowZoneTV6 жыл бұрын
Nice video, good length!
@knowlesy19815 жыл бұрын
Wicked video very helpful.. grate work cheers fella
@CapN-Savvy6 жыл бұрын
First, I want to say great video. I wish I had this when I did my ST install. Also had a question, do you remember where you ended up at after all the height adjustments? How many turns in the rear and how many turns in the front? Im running a staggered set-up: 18x8.5 Front et38 on 235/40/18 18x9.5 Rear et35 on 255/35/18 04 E46 Coupe I have the rear fenders shaved, but still get some rub in the rear when hitting bumps. Been lazy, but definitely need to get under there and raise it up which is why I am curious to what where you had things set. Thanks
@mrstamped1316 Жыл бұрын
I know it's been 5 years but camber arms in the rear would've eliminated your rubbing issues lol
@deity.467 жыл бұрын
And what kind of brakes is that car running?
@SemiEv7 жыл бұрын
Grayson Terry I'm running stock remanufactured brakes that were powder coated red, and slotted/drilled rotors
@kay198335 жыл бұрын
@@SemiEv Why not the bilsteins , why these kind of adjustable struts?
@silviobugatti15405 жыл бұрын
@shoplifetv can you explain why there's no need for shorter links in the back when the car is lowered but a must when lowering the car in the front? Thanks.
@phgu5 жыл бұрын
The end link isn't attached to the shock in the rear, as it is in the front.
@beng.64177 жыл бұрын
great info as always!!!
@andreagate542 Жыл бұрын
great video! do the ST xts Assemblies allow you to preload the spring Independently of setting the right height, so that spring does not have too much pre-load on it or bounce around depending on the height setting?🙏🏽
@CreativGaming7 жыл бұрын
Does this setup work for XI models? And can you recommend good Coilovers for a 2005 330xi please. Much appreciated.
@magradrift62714 жыл бұрын
FK automotive is what I'm putting in 2morrow
@Steve-bh3zg5 жыл бұрын
Hey man I’m about to put some bc coilovers on my e46 m3 and the ppl at bmw keep say those reinforcement plates don’t go on my vehicle. One kid told me that I should need them because bc usually has everything
@Geoduck.4 жыл бұрын
WARNING…. Serious cringe factor when the sound deadening material is torn out. ;^) Joking aside, this is a very useful video. I appreciate you keep them short and to the point as well.
@Guanakito503fcb7 жыл бұрын
Thank you very much for this video🙌🙌🙌
@scottf.38087 жыл бұрын
Good install vid....Good stuff...
@jamesstanding33645 жыл бұрын
The only thing I can see wrong with the way you do this is the spring will change the high but the spring all so controls preload so if you ajust both the same then shortly the driver whight will through out the ride hight and weighing the car to set them up would be better
@onesikm3 Жыл бұрын
Homie just ripped into my car like we are at the junk yard with no F**** given no thanks 🙈🤦🏻♂️
@nelsoncordova93543 жыл бұрын
There's a set of adjustable coilovers here at my local junkard on an 05 e46 330i rwd sedan that look great & am considering going and taking them off. However i own the same 05 e46 330 sedan but mine is an 330Xi (AWD) model, they look like they'd fit/work. Should i not attempt the replacement or what Should i do?
@austindamrel87954 жыл бұрын
Where is your shop if I wanna stop by for some work done on my BMW?
@MrTruthseeker994 жыл бұрын
Great video
@ihopethiscommentisntabusiv46704 жыл бұрын
Awesome video man, any torque specs you can share?
@diegohidalgo92487 ай бұрын
What's torque spec for the 4 bolts you need to remove top hat bolts, bottom strut to lower a arm and spring bolt. Lmk currently have all installed in the rear just not torqued
@Retexz7 жыл бұрын
Im just about to buy these ST coils, but i dont know if i should go with the ones with camber/caster plate or the ones without that. I dont want insane camber or change the caster. XA or XTA? Best Regards
@MarkOBrian7 жыл бұрын
Hey mate I need some help with my 330ci when I start the engine and drive it, it feels groggy and sounds like something is lagging in the engine doesn't drive properly but eventually the traction light comes on and abs light comes and makes a bleep noise then drive perfect no problem at all but this happens every time I drive, do you know what could be causing this? awesome channel btw
@jacklahey6826 Жыл бұрын
How much did all these parts cost? Probably gonna do that whole setup on the waggon
@MrBeuller3 жыл бұрын
QUESTION! Does anyone know if the reinforcement plates for the front struts causes a rattle sound? everything is tightened and I cant figure out where the little rattle is coming from. I appreciate the help in advance :]
@MrChristianMaynard6 жыл бұрын
Are e46 I,ci and xi coilovers interchangeable ? Or will the xi kits be different since they are awd? I’m looking for adjustable kits but everywhere I look it says the e46 that are rwd will not fit awd, I don’t see why not. I have 04 330xi will a kit for 04 330i not fit because mines not rwd?
@ThaDutchDK19897 жыл бұрын
how much do the front reinforcement plates cost? cause i did the rear cause its very common but the front is normally never cracking right only by m3? further have you got solution for the squecking trunklid?
@slammedb18a13 жыл бұрын
Any suggestions for if your coilovers didn't come with an indentation for the pinch bolt to slide in? Lol
@Crepos7 жыл бұрын
Hey mate, i have an e46 320d 136hp 5 speed, and i want to know if i can put a 6 speed gearbox from an e46 320d 150hp? And what are the good parts and bad parts changing it? Keep up the great work
@connerhart32236 жыл бұрын
Drop a Cummins in it. Not really. For the most part, going from a 5 speed to 6 speed isn't much more than just swapping the transmissions out. It might be a little different due to wiring and whatnot, but it shouldn't be difficult.
@Anthony-qh1xv2 жыл бұрын
Hey I have a BMW X4 35i, M suspension, will using sport mode wear it out faster? or not (in relation to suspension)
@ROGUESPIRIT_3 жыл бұрын
my e46 is bottomed out with the front suspension, any reason that removing the helper springs will make the ride shit?
@isrealperez90696 жыл бұрын
Say what causes inner tire wear and how to fix it rear driver side
@miguelmarin43096 жыл бұрын
Hi, could you please provide a link for ebay or amazon for the kit you are using ? I want to do this project for my bmw 318i 2000 ans i need some recomendations, thanks.
@yohanns63876 жыл бұрын
Marvelous channel!
@isaactorres71314 жыл бұрын
Love your videos. If i buy an ebay turbo and install it. Woul you be able to a remap?
@mozoe7135 жыл бұрын
Hey I only have one coil over creaking on the right front side they are adjustable I’m not sure why can anyone give me an idea .. is it the chamber plate I didn’t touch it because I didn’t know how to adjust it
@adrianbravo91603 жыл бұрын
i have the sport package on my 330i e46, do i have to buy a specific type of coilover for it or can i use any e46 compatible coilover?
@leored79 Жыл бұрын
Dont you have to revit the reinforcement plate to the mount?
@ES-REDROT4 ай бұрын
Does the car need a re-alignment after this?
@kriss85662 жыл бұрын
Bonjour Bonne vidéo 👍 Mais comment régler la hauteur arrière en vidéo svp ?
@vviiper7 жыл бұрын
Hmmm, @ShopLifeTV I am about to stick some Eibach ProKit springs on my saloon. I got some Meyle HD front droplinks to replace the old ones. Am I going to have issues with the new front droplinks as the car will sit a little bit lower on the Eibach springs?
@mike.135i6 жыл бұрын
i have lowering springs and stock everything else and i dont have issues
@3APNHA4 жыл бұрын
Best videos 👌
@dironizareyes5963 жыл бұрын
Impala links would work with lowering springs? Which year impala? Please need to know
@kikin1240457 жыл бұрын
Does this apply for 330xi as well? And are 2wd and 4wd struts the same?
@ciidde3 жыл бұрын
well the head of the 18mm bolt in the front broke off for me 😕
@waleedhameed76377 жыл бұрын
Thank u so much
@tysonbracero95654 жыл бұрын
Can you lower a 325xi with coilovers from a regular rwd sedan?
@legendarymzr68017 жыл бұрын
What brand/type of coilover you recommend for a e46 330xi??
@user-dj7cp9jg9m4 ай бұрын
What is the part # for the lowering sway bar link pls?
@NirmalSingh-gf8ef2 жыл бұрын
Watching after 4 years How was it ? I am wondering to have same for my e46 What do you recommend mate ?
@ShopLifeTV2 жыл бұрын
Still use them! Still going strong! Full disclaimer though I do not drive this car everyday
@connerhart32236 жыл бұрын
I'm gonna squat mine when I get coilovers. Obviously not as a permanent thing, but still
@cornherald26505 жыл бұрын
I got some racing coil overs, but don't l know how to adjust... rather not have a ship due it, maybe I need friends that work on cars
@BrownNProud7815 жыл бұрын
usually you have to put the top ring all the way to the top where it meats the spring, you twist it left to lower it. you'll see the whole spring twist
@user-kl3nq2lu7d6 ай бұрын
did preload just not exist 6 years ago or what
@tubefreak34246 жыл бұрын
gold
@arturosantiago184 жыл бұрын
Was up bro can you do rear shocks and coils ?
@mikespeed3928 Жыл бұрын
Where'd you get the reinforce plate from?
@ericklopez17356 жыл бұрын
Can you please tell me if you pit 2 rubber pads for the rear springs ? (One on top and one on the bottom) I have some weird noise in the back... I put the adjusters on the bottom metal on metal with no rubber
@jamesstanding33645 жыл бұрын
7.40 shows reused them
@pabtolosa7 жыл бұрын
Buen video. Saludos...
@eastsideofthetracks83113 жыл бұрын
How do I know wich is left or right ?????
@tallerguanaco94857 жыл бұрын
Hey great videos thanks for the information. I have a cuestión hop can help me What can cause a shaking steering wheel on a 325xi thanks please help me.
@Truthseaaker6 жыл бұрын
Luis Santamaria warped rotor
@elijahoelker34116 жыл бұрын
Bad alignment
@jubileecaprice5 жыл бұрын
Hey can buy those for my 08 750li
@TecKnowTech7 жыл бұрын
I have st coilovers anyone know where we can purchase the front coilover inserts I email ST a few times with no reply smh. RF insert is leaking.
@koraytuncay65926 жыл бұрын
what is the meyle sway bar links part number ?
@MsSebaastian6 жыл бұрын
what kind of trunk door is that?
@jodyblackwell83407 жыл бұрын
is it the same for the 1996 Z3
@yoniroberto16724 жыл бұрын
Dose these work on a BMW x3 2004
@Tommy-wo4hg3 жыл бұрын
hi do you ahve the parts number of the end links?
@teamxgp73834 жыл бұрын
Yoooo what kinda rims ya running?
@carlossandoval7250 Жыл бұрын
Are these coilovers the same as the street edge coilovers ?
@onesikm3 Жыл бұрын
LMAOOO NO WHERE CLOSE BRO. We ain’t in the same tax bracket cuzzz😂
@santiagocastaneda78174 жыл бұрын
Does anybody know a cheap coil overs for xi versions ?
@masterofdisaster666 Жыл бұрын
Could these be adjusted to near stock ride height?
@onesikm3 Жыл бұрын
Almost
@olliesmall48795 жыл бұрын
Anybody know what the wheels are??
@fanoffrankieonps36 жыл бұрын
What rims are those?
@eastsideofthetracks83113 жыл бұрын
This is difficult!
@MitchellBrower2 жыл бұрын
What spring rates did you go with?
@onesikm3 Жыл бұрын
Last I recall st does not give you an option for differnt spring rates for an off the shelf kit unless otherwise requested you should recieved 400lbs/inch front and 479lb/in rears which in kg is like 7kg front and 9kg rear. Please correct me if I’m wrong and don’t follow this video tutorial as a good guide since this install had way too many mistakes lol
@benz_benz_benz7 жыл бұрын
Where i can get this reinforcements plates?
@cyborge087 жыл бұрын
ECS tuning should have them
@matdoucet4207 жыл бұрын
do you know the torch specs for the suspension
@mike.135i7 жыл бұрын
yeah full brightness
@cmkm547 жыл бұрын
M. Hayes 😂😂😂😂
@dasausa48627 жыл бұрын
Can you lower and xi??
@magradrift62714 жыл бұрын
I'm late I know but yes you can, I have a 330xi touring and I'm doin my coilovers 2morrow, the reason I'm watching this vid
@benjinom7 жыл бұрын
Link to coilovers?
@mike.135i6 жыл бұрын
literally type in ST coilovers in google.. search and youll find it
@sheldonherbert81163 жыл бұрын
So they seriously not show the finished car? Tf 🤯
@onesikm3 Жыл бұрын
And LOL misinformation at its finest bro. Do you know what you didn’t then now ? You installed camber/caster plates actually but you must informed viewers to either mount the front strut with the slide adjustment front to back if caster adjustment is desired or side to side if camber is desired ? Lol You never stopped to ask yourself, “ hey why does this camber plate have some many offset holes going around this entire camber plate” 🤔🤭 on the kw/st bmw gamer/caster plates the come included in this kit and other kits just like them with the similar design plate only mounts in one direction where your camber is adjust with the slide in the left to right side to side position and caster is changed by removing the mounting studs and shifting them to the other holes already available to you on the plates LMAOOO !!!!! 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀