Oh my God, thank you so much for this video. I’ve watched countless videos, and none of them showed how the belt go on the pulleys like this one you are truly a lifesaver. I had no diagram to look at because my serpentine belt snapped on the highway.

I know perfectly how to do this but I like your videos so I watched it anyways. Just like that :)

As always great video and audio and plenty of information! I own a ‘02 325i w/AT. Over the weekend my SERP. Belt broke while driving to a friends wedding. I got lucky that it didn’t get into the engine via crank seal! Before I install a new belt would I have or need to re-time the ole gal or no? She starts still and have replaced the pulleys including water pump pulley as well. 124k miles btw. Thanks in advance for any info and for all the experiences u share with us! Keep em coming !

For anyone that’s stuck on the fanclutch I had to use a saws all then a nut cracker once I had more room to work with

An excellent DIY presentation. Clean video and audio. I enjoyed a lot. Thanks.

Excellent!

nice work there Nathan I will be replacing all my belts and tensioner my self this weekend....

Where did you get all those parts at? My x5 3.0 has a squeaking noise coming from the alternator front of the engine that sounds awful and I think it’s one of the pulleys

how did you take out the fan while the belt is broken ? im having trouble with it and its a pain in the ass !

I know this is an old video my question is cuz I see one other videos would these pulleys make my M54 fan wobble if they are bad

I’ve been thing about getting rid of clutch fan due to what happens when it breaks plus I’ll be better gas mileage, a little more hp and quicker rev. I can’t find much info about it. How do you feel about getting rid of the clutch fan and what do you recommend for the electric one as a replacement and what has to be done to have it work properly? Thank you and I love your videos. They have helped this new bmw owner out tremendously

Are there one-time use aluminum bolts that need replacing?

This video is as good as it gets. Thank you so much sir! But one question for you, My car makes some noise every time I step on the gas. The fan clutch runs so much higher than it should and it’s making some noise. When I drive around town it makes noise like a shrieking sound noise every time I step on the gas. But if I let go of the gas the sound goes away. But when I run on the freeway I have power and there’s no sound the higher I go. The sound comes from the tension belt and the fan when you put in park and step on the gas. Please help me. I change the purge valve, the air flow sensor, and check all the air flow and they’re all ok. I have a 2002 BMW X5 3.0i engine. Please help me. I can’t figure where it’s coming from. Is it my idler pulley or the water pump. I recently change my water pump because it was broken. The shop did it. Don’t want to lose anymore money in the shop no more. I only knew after watching your videos that the fan clutch goes right into the water pump. Please help me! Thank you! By the way, is it normal for the fan clutch not be able to trust by your hand? I see that you can spend the fan clutch with your hand but I can’t with mine. Is the fan on too tight? Is this why I’m hearing this sound? Is this why when I step on the gas the fan runs like crazy high? Is that normal? Please response! Thank you!

I can't find the location of the torques or bolt to loosen the Tensioner

Great video. FYI guy that works for company I work for got two weeks off using the slang for Diagonal Pliers in a public business because someone thought it to be offensive. Just the world we live in. 😢

I got a 2005 330i where did you purchase your parts? Rock auto? I have a late build 330i which has M3 components. So I'm not sure what are the right parts to buy.

This happened to me on the freeway going 80 mph in the left-most lane. My power steering just cut out, and all of a sudden my e39 felt like a old school chevy lol. Pretty scary moment for a relatively new driver.

Serpentine belt breaking, I have a 2003 E-150 6 cylinder 4.2 liter Cargo Van with 130,000 miles, The belt shredded off after starting in cold weather, I purchased a replacement (Drive-Rite $27 6-rib 1 yr. warranty belt 1020K6 6PK2590) I had a very hard time getting it on, I had the pulley moved over 100% and it still took two men and the but of a hammer to push it over the idler pulley, seemed too tight compared to videos here on You Tube, so I figured this was due to slight difference in length due to manufacture??? or could this be a symptom of something else? I started and ran it for10 minutes, it started smoking at first, figured this was due to cold belt, moisture whatever, it stopped after a few minutes, so shut it off. restarted and it ran for a minute then snapped, on one side of the belt appears to be some wear and slight shredding. I do not want to just buy another belt and put it on without finding the cause here, 2 belts broke leads me to believe something is out of alignment? What is the most likely cause in your experience? spring pulley? idler pulley? A/C locking up? Thanks in advance for any help...

Top work Nathan. Exactly the job I have to do this week. My Idler pulley actually disintegrated. I'll be replacing all of them plus new belts of course. Mick

Just to be clear, the Torx size is 50, not 15, right? I want to be sure I have it before I pull it all apart.

This looks like a great tutorial. My belts got a terrible squeak in reverse when at low revs and while idling in reverse. Also when I take off at low revs in drive. Will this be the belt worn/loose? Or is it more the pulleys? My car is a 2001 BMW 330i

Excellent video. Naming all the parts as the work is done and does not assume the viewers are knowledgeable.

What is the outro song you used? Thanks.

Do i for sure have to take the fan off to replace the serpentine belt? I just had to replace my ideler pulley and i have a 32mm wrench for that nut but don't have anything to hold it from spinning

can a faulty belt cause the engine to idle high and cause the alternator not to give charge to the battery?

Hey Nathan. I must be blind, but clicked on your Amazon link. could not find the pulleys to order... Want to support your channel, please let me know how to order...

You didn't show anything really lmao

You skipped all the important parts video is no good!

Horrible video I wish you would actually show the work that you are doing instead of skipping that part but thanks for all the information