BMW E9X 325i N52 Rough Idle DISA Valve ISSUES

Рет қаралды 17,294

Күн бұрын

BMW E9X 325i N52 Rough Idle DISA Valve ISSUES
Become a member and get exclusive discounts at www.ZeroTo60.com plus other unique perks and benefits:
/ @zeroto60tube
In Australia? Visit the Zero To 60 Shop! www.zeroto60.com
Follow our socials for BTS stuff and more car content
On Instagram: / zeroto60tube
On Facebook: / zeroto60tube
Business Enquiries: zeroto60tube@gmail.com
---------------------------------------------------------
0-60 and 100-200 Dragy timer: amzn.to/2IKMQr0
---------------------------------------------------------
Our Must Have Tools:
Car Trim removal set: amzn.to/3oQhsHe
Under bonnet led light: amzn.to/3aaDJLt
Electric Rattle Gun: amzn.to/380Eh41
3/8" Drive torque wrench: amzn.to/34aGzwy
1/2" Drive torque wrench: amzn.to/37gGUPZ
---------------------------------------------------------
Our Must Have Car Care:
Hybrid ceramic: amzn.to/2KlkMuP
Tyre shine: amzn.to/2WcRzox
XL microfiber dry towels: amzn.to/2IShFdC
Wash mitt: amzn.to/3oQM7UA
---------------------------------------------------------
Our Camera Gear:
Ultimate camera/gear bag: amzn.to/2Kj1N46
Action/vlogging camera: amzn.to/37eWawM
Non-vibrate suction mount: amzn.to/3a9vmjy
Wireless mics for in-car audio: amzn.to/3a8C1dH
---------------------------------------------------------
When we're not working on cars, we're watching the Grand Tour!
amzn.to/3qXghY4

Пікірлер: 42

@cocko1135 3 жыл бұрын

Good on your following up on this and not just doing performance vids. Nice work mate

@ZeroTo60Tube 3 жыл бұрын

Thank man! It’s all part of the car journey. Hope you’re well mate.

@Saif0412 3 жыл бұрын

Nice one! I remember the M54 also had Disa valve issues, I remember buying a repair kit, never got round to fixing it 🤦‍♂️

@StratoJohn 3 жыл бұрын

Good work Andrew 👍🏻

@anaestereo810 Ай бұрын

Good job mate...next on my todo list, while the manifold is off ill do the crankshaft sensor

@Nico_335i_DCT 3 жыл бұрын

Great fix guys! The coils on the n52 are on their end at about 180k km's most likely. It's better to change all 6 indeed. Dutch regards, Nico.

@nathanjames6951 3 жыл бұрын

Don't sleep on the big one, it ended up in my #6 intake runner. The aftermarket ones are also known to be backwards. Check them in INPA before you stick them in.

@aaronestevez8086 2 жыл бұрын

For future reference. It’s hard pulling out the intake manifold with everything connected to it. You can actually reach the diss valve if you remove the alternator which is a little bit easier than taking off the whole intake.

@ZeroTo60Tube 2 жыл бұрын

Appreciate that info. Thanks man!

@miguelcampa7036 3 жыл бұрын

I got a factory freak n52 solid engine

@jackypattersonjr.leadinged2560 3 жыл бұрын

What fault code did you have for the small DISA? Was is 2AA9?

@brendenns3926 3 жыл бұрын

I just love those cars, although i love my e46 more🤣 in my opinion easier to work on 😂..have yall done work on the e46 platform?

@shalveenkumar2142 3 жыл бұрын

hey mate did you get any codes for the DISA Valve? My 2011 F10 N52b#) has been driving like crap for the past year and no codes we can't figure out what it is. Occasionally I hear a lumping sound from the engine bay. Did you get any codes or any noticeable sound from the engine bay to conclude this was a DISA Valve issue?

@Scuffed_Andy 3 жыл бұрын

7.6 l/100km? My stock e39 528i auto is using 11.2 l/100km combined highway and suburban. Is it broken? Should I burn it?

@benlegair5935 Жыл бұрын

I’m getting around 20mpg spitting oily water out the exhaust and the car pulls like a child on a trike. I’m pretty sure it’s a air related issue since I have replaced all Sparkys and checked the ig coils are good. Am I on the right track or am I returded?

@isrealperez9069 11 ай бұрын

I can know if you can help me by chance when I started my car and when I put it in reverse I guess the word is it surge up and down

@priit7777 Ай бұрын

On my n52b25 both disa valves were not working correctly (not closing at all), neither of them gave any errors....

@igotaction 3 жыл бұрын

Old school rubber covered spark plug wire pliers are perfect for getting the vacuum lines off the intake manifold.

@ZeroTo60Tube 3 жыл бұрын

Nice tip man!

@igotaction 3 жыл бұрын

@@ZeroTo60Tube no worries mate😉 hit the vacuum hoses with some WD-40 and let it sit for a few and then the spark plug wire pliers are perfect for getting behind/in the middle of the manifold you may even get them off and not crack them

@zafiropapanikitas5568 3 жыл бұрын

You are just unreal... is there anything you can’t do? 🤩

@scottstrachan9915 3 жыл бұрын

I hope for your sake that large DISA valve doesn't come apart and get eaten by the engine.

@danmurphy5889 3 жыл бұрын

What software do you guys use for your fault diagnostics ?

@ZeroTo60Tube 3 жыл бұрын

On the BMWs it’s mainly ista or inpa

@ben7020 3 жыл бұрын

What do those valves actually do? Variable Intake runner length?

@ZeroTo60Tube 3 жыл бұрын

Spot on man. Yeah is basically to improve low end torque.

@sksuppressor756 2 жыл бұрын

This video gives me more belief it is the disa and not the maf. Fucking good cuz I ordered a disa haha

@mayc4543 10 ай бұрын

Your mpg seems to be to good. My 325i averages 15l/100km.

@mit0lajgi284 Жыл бұрын

what was the consumption before changing disa valves? my consumption now is about 20l/100km. Also when i was checking the disa valves, closing and opening the small one was slower than the big one. my engine n52b25

@romelpalmes2235 Жыл бұрын

Do you have 323i? because N52b25 is only stage 2 manifold with only 1 large disa valve.

@mit0lajgi284 Жыл бұрын

@@romelpalmes2235 325i europe, 2 disas

@Mr16bit 3 жыл бұрын

Also given all the oil in the intake manifold would you recommend the owner get a walnut blast at some point?

@ZeroTo60Tube 3 жыл бұрын

The intake ports and valves are really very clean, well spotless. These are full time port injection.

@Mr16bit 3 жыл бұрын

@@ZeroTo60Tube oh cool. Thought they may have been di

@DebtFreeCars 2 жыл бұрын

You need to change your CCV like now. Oil in there is not normal.

@jeremiahex Жыл бұрын

Hey, guys! I have an idle issue on my S85. How can I send you a video so you can hear it and get your thoughts?

@ZeroTo60Tube Жыл бұрын

hey mate, unfortunately not something we can help with at the moment.

@jeremiahex Жыл бұрын

@@ZeroTo60Tube I was looking for a second opinion. But that’s cool. I see how it is. Peace out.

@ZeroTo60Tube Жыл бұрын

@@jeremiahex you need to understand i have over 1000 unanswered emails. I have probabaly gone through similar with 1000 different people over the last 4 years, it never takes 2 minutes with a diagnosis video, it turns in to 20-30 emails and hours of correspondance. I need 5 staff to manage the messages this channel gets. Im only one man and lately i dont even have time to make new videos. There is a reason most youtubers dont even answer comments, we dont have any time. So just to clarify you have no idea how it is.

@Mr16bit 3 жыл бұрын

Just listen to 7:49 to 7:56 🤣