BMW engine N62 V8 Assembly instruction. Part 1
Рет қаралды 50,586
This video instruction is made on the basis of the official instruction BMW TIS.
Part 1
Content:
0:16 About the rebranding of our BMW team
1:32 Cylinder Block, crankshaft Installation
5:03 Piston group Installation
10:00 Oil pump installation
10:43 HBC. Cleaning and lapping of valves
12:33 HBC. Valves installation
14:08 Link to the 2nd part of the videoOur main focus in BMW engines is tuning exhaust systems. You can get acquainted with the interesting offers of sports exhaust systems for your BMW on our websites and other resources listed below.
2nd Part
Content:
00:17 About rebranding our BMW team
01:18 Frames of the content of the 1st part
01:29 Installation of cylinder heads
04:10 Installation of the rear crankshaft oil seal
04:42 Installation of the upper and lower pallets
05:42 Installation of the front crankshaft oil seal
06:17 Motnazh back cover of the cooling system
06:38 Installation of the top cover of the cooling system
06:53 Installation of a crankshaft vibration damper
08:52 Installation of the timing
13:23 Installation of the stars Vanos and timing adjustment
16:24 Installation of valve covers
18:04 Appeal to the viewer from the author of the video
18:06 Link to 1st part of the video
Our sites:
doctorlavr.com
bmwdoctor.ru
Our Ebay- www.ebay.com/usr/bmwdoctor.ru
Our Facebook Store: DrLavrBmwExhausts/?modal=admin_todo_tour
Our phone for WhatsApp/ Viber: +7 495 320 06 22
We are in social networks:
Instagram - bmwdoctor.ru
DRIVE2 www.drive2.ru/users/lavr006/
My personal Instagram - lavrfriend
My personal facebook - alexander.lavr.1
If this video has been useful or interesting for you, I ask you to give a "Like".
Who wants to stay with us, subscribe to our channel.
Do not forget to click the "Bell" to receive the notifications of new videos.
See you!:)
@SheaAP1 5 жыл бұрын
Sharing this channel. I was disappointed with the lack of aftermarket support with my e60 550i after purchase. Made my day watching this assembly video. Hope you continue to support the N62 platform mods and tutorials!
@doctorlavrbmw 5 жыл бұрын
Yes! Sure! :) Very soon the 2nd part of the video!
@ChrisTyroneDrip 3 жыл бұрын
Yes no aftermarket about the e60 550 I was disappointed. All about the F10’s and up
@FishFind3000 3 жыл бұрын
@@ChrisTyroneDrip aftermarket doesnt like NA engines only turbo since they can make big power numbers with easy upgrades
@ChrisTyroneDrip 3 жыл бұрын
@@FishFind3000 yeah I figured that’s why I sold my 550i in exchange for single turbo e36 👌🏾
@ChrisTyroneDrip 2 жыл бұрын
@Burim Bunjaku 550i was fairly unreliable. Single turbo e36 was faster than my 550i and more reliable
@prabhakarshenoy9571 3 жыл бұрын
Thank you so much. I have four BMW X1, 528i, 540i and 740il. I love BMW cars. I enjoyed repairing on bmw things. Thank you for your vlog
@doctorlavrbmwperformance2467 5 жыл бұрын
Friends! This is a new channel for repairing BMW engines and tuning exhaust systems. Help with views, comments and likes!
@shahrukhmuhammad6664 4 жыл бұрын
We will...
@Trinibad718 4 жыл бұрын
Hi can you give me a website where I can purchase crankshaft and Conrad bearings for this same engine having a very hard time if I have to send you the money to get it I don't mind I'm located in USA
@djoneshot8925 4 жыл бұрын
hi my car is at the shop I have a 2009 BMW X5 4.8l i'm having a hard time finding the piston rings can you tell me the piston rings spec are the ? bore= 93mm 1st - 1.50mm 2nd - 1.50mm 3rd- 2.0
@doctorlavrbmwperformance2467 4 жыл бұрын
@@Trinibad718 Unfortunately I can not help, sorry
@greengoldmello 4 жыл бұрын
Im in the process of an n62b44 rebuild myself. I avoided removing the pistons and crank. Very helpful and well made video!
@doctorlavrbmwperformance2467 4 жыл бұрын
Thank you friend!
@MrConnorHorton 4 жыл бұрын
Thanks for the incredibly detailed video
@xgiftbolzenx 3 жыл бұрын
Cool video, I drive a 545i and i love this engine. Nice to see how it's build from scratch. You are awesome!
@gabrielchifor8680 2 жыл бұрын
Very valuable information. Thank you for sharing a very well done video on this engine.
@Deadslowsupra 4 жыл бұрын
Man keep these awesome n62 alive!!!
@chrisN80 2 жыл бұрын
Amazing job on the video and description on how to do the job
@shahrukhmuhammad6664 4 жыл бұрын
Great and very useful video.
@MaxAKbar47 2 жыл бұрын
Nice video. Really insightful. It would be nice if you had a similar video for a s62 engine.
@PaivaRoni 4 жыл бұрын
Show/Congrat!!
@patrickposey2003 Жыл бұрын
i'm happy with this video I just wish it didn't move so fast.
@vojtechskoda2710 3 жыл бұрын
First of all I would like to thank you for a great tutorial! Can you please give me advice - I bought timing tool kit, should I do any marks on vanos or camshaft anyway to don't screw timings ? Or I can continue taking heads of with calm conscience ? Thanks.
@kombo7939 3 жыл бұрын
Hello, I really like your videos and i just wanted to ask if u could give me a tip where i can buy that holder for the engine u have in your videos. Thank you for response
@x1area51ii7 4 жыл бұрын
This is like grilling steak but in metal lol..awesome
@judochopthefed 4 жыл бұрын
X1area51 II haha. 🎯
@doctorlavrbmwperformance2467 4 жыл бұрын
:)))
@truckatadders 3 жыл бұрын
Can you provides a link to where i can buy that engine stand please?? It's the closest I've seen to the ones in the dealership 👍👍
@FishFind3000 3 жыл бұрын
Im surprised your not using engine assembly lube
@meayman1 2 жыл бұрын
hi, thanks for the video, could u please tell me from where u got the lapping tool and spring compressor tool :)
@chidiigilar7128 3 жыл бұрын
Is it possible to replace an N62 timing chain in a BMW x5 4.4i E53 without unbolting the alternator and also what socket size did you use to loosen the crank shaft bolt?
@The_TURK. 3 жыл бұрын
how should you drive the car after having re-engineered the engine? do you have to drive slowly or drive fast so that the engine has full power again?
@Trinibad718 4 жыл бұрын
Is it the same thing for the 4.8 n62
@kavintruong1106 2 жыл бұрын
did you use new crankshaft main bearnig bolts and caps? i know you said new connecting rod bolts but what about the main baring? are they reusable?
@baims8367 4 жыл бұрын
? Or his Bmw guy I recently but 1 owner 2008 550i very nice how ever needs the valve seals car has 90,000 not bad yr. I was going to remove engine and Trans to replace the seals also rear main a gasket replacememt on woke engine might as well ? Is there any performance prt for this I can't find any cams pistons ect like to hop the engine up headers ect if u know of any mods and parts please let me know thnx
@SanDoval201970 3 жыл бұрын
so after you are laping the valve, after your done you mix the valves , so in dosen matter what order they go I all way live valve one with cylinder one I do not mixing them, so that ok it dosen't matter?
@judochopthefed 4 жыл бұрын
Perfection. Has BMW changed their gasket material for the better?
@doctorlavrbmwperformance2467 4 жыл бұрын
Thank! But I did not understand your question, friend.
@mathaaushle 11 ай бұрын
”Spred locks of composite ring” what is he using?
@szaboimre9268 3 жыл бұрын
Hi! This is USA model?
@ivandro1983 2 жыл бұрын
I have a question,the loose leaves of connecting rods are blue and red ?this is what a got from official diler ship like set.
@ivandro1983 2 жыл бұрын
They're different colors,it's right or thry make mistake?
@judochopthefed 4 жыл бұрын
Dr. Lavr, When purchasing your headers, should I cut my cats off my manifolds or purchase high flow cats and weld onto the headers? On a bmw 645
@doctorlavrbmwperformance2467 4 жыл бұрын
First, you install a sports collector. Second, you inject sports catalysts into the exhaust pipes at a distance of 30-50 cm from the manifold flanges.
@ryanlabbate515 2 жыл бұрын
Hello does anybody know if this is the same for an m62b44?
@Manny91352 3 жыл бұрын
And final step check engine light 😆
@Gtbtd 4 жыл бұрын
Guten Abend. Bei wie viel km würde diese Arbeit gemacht? Wie sahen die lagerschalen von kolben und kurbelwelle aus? Wie war das hohnbild? Allgemeiner Verschleiss?
@doctorlavrbmwperformance2467 4 жыл бұрын
Overhaul of this engine was carried out at a mileage of 200,000km. But it was not made due to engine wear. There was a hydro stroke in the cylinder.
@jianruli3750 4 жыл бұрын
Where I can buy the valve compressor tools
@doctorlavrbmwperformance2467 4 жыл бұрын
In the online store, friend :))
@Trinibad718 4 жыл бұрын
what if I use assembly lube instead of oil to coat the bearings
@msengineeringdavid3148 4 жыл бұрын
Don't mind whats done in the video assembly lube is what you want on there for a dry start.
@leonwittorf2388 3 жыл бұрын
are the exhaust and intake springs of the valves the same?
@magicm6372 2 жыл бұрын
No. The exaust are longer.
@leonwittorf2388 2 жыл бұрын
@@magicm6372 they are the same
@leonwittorf2388 2 жыл бұрын
@@magicm6372 it is also the same part number
@giedriusstankunas4320 4 жыл бұрын
whats different between Hm and Nm torq?
@doctorlavrbmwperformance2467 4 жыл бұрын
There are no differences, this is the same, too, friend.
@garyvanremortel5218 3 жыл бұрын
What the hell is a radical bearing?
@thienti1908 2 жыл бұрын
Can I remove the heads of the N62 (on the E60) without completely removing the engine?
@haipingwang7075 2 жыл бұрын
Yes! But it needs lots efforts out of your mindI did twice!
@moolyong 2 жыл бұрын
피스톤링 플라이어좀 사서써라
@ronamariemelad4061 3 жыл бұрын
very dirty!!! much better if you insert the piston rings in the grove the apply oil
@FishFind3000 3 жыл бұрын
who ever is doing the voice over and saying tighten to N M is annoying!!! Its newton meters!!!!!!!!!!!!!