BMW F10/F11 Diesel Fuel Filter Replacement DIY

Рет қаралды 49,617

Francesco Galante

Жыл бұрын

Recorded with Dji Osmo Pocket 2

Пікірлер: 28

@PonderingOne Жыл бұрын

Francesco, thank you for sharing your information with us. This is another helpful video. I respectfully suggest that you use jack stands when working under your car. The hydraulics in the floor jack can fail, which would injure you badly or possibly kill you. Please be safe!

@paulroman7587 Жыл бұрын

This is great job and well explained, thanks!

@br0leg274 Жыл бұрын

Hello Francesco , could you tell me which type of Car-jack you are using? I own also a 530d xDrive and do the most service stuff on my own, but due to Corona my workshop closed and I need to these things on the street.

@DefJamDead Жыл бұрын

Nice tutorial, thank you

@dinhvanpham8102 3 ай бұрын

Hi, Thank you very much for another fantastic video. Your videos are the best👍 Can I ask where you got Ista+ from? I have an F11would like this software.

@vilimyllykangas1027 Жыл бұрын

Can you make a video how to change serpentine belt

@nailgafarov236 Жыл бұрын

I replace it last year, run ista procedure for remove air during procedure I hear pump and stream into filter, but car start from 3rd attempt. On next day same 3rd attempt for start. But after I dont have any problems. Why bleeding didnt remove air? Maybe High pressure pump issue?

@lerafessayeur9111 Жыл бұрын

Bonne vidéo 👍.

@HamzaGuzel690 2 күн бұрын

OBDeleven just added a fuel priming app for this car. Is that pretty much the same thing? Is that safe? It only does it for 30 seconds

@HNZKFK 5 ай бұрын

Thanks for video, ista works good

@Stefano_C_Pli 7 ай бұрын

Ciao. Volevo chiederti se è possibile cambiare il filtro senza usare la diagnosi oppure se serve per forza usarla per attivare la pompa del gasolio per fare il riempimento del filtro?

@Junglefever71 Жыл бұрын

Nice job. Can i ask where you got Ista+ from? I have an F11would like this software. Thanks

@paulroman7587 Жыл бұрын

Yes , that will help us a lot, If somebody will explain how to install ista+

@adigerlaprasad5348 Жыл бұрын

Nice video sir🙏🙏🙏🇮🇳

@mirkomz Жыл бұрын

God job 👍 Is it possible do this maintance without Ista use?

@phoenixosprey7455 Жыл бұрын

Yes but you risking the CR pump running on air.

@mihaicaliman1867 Жыл бұрын

Yes you can , I have done it for 3 times without the ISTA , make sure you clamp end of the hose , even if you forgot about that it's fine the car will start a bit slower . What you can do ... Put ignition on for couple of times and then start the car and enjoy your ride!

@seanmccarthy407 Жыл бұрын

Some scan tools also have a 3min low pressure pump run programme prior to start to remove any air I recommend you get one of these for fault codes and battery replacement too

@alessiopaganelli Жыл бұрын

Ciao ho visto il video, volevo sapere se è possibile sostituire il filtro senza usare il PC per la procedura di svuotamento aria, grazie

@SchemAytas-te7st 3 ай бұрын

No your hpfp will be smoked after crank the car without bleed the system

@johnnaysmith7218 2 ай бұрын

Does bleeding have to be performed on ISTA for E60 520D N47 from 2008?

@A.A.TURBOsystems 18 күн бұрын

Yes

@DaddysPlay Жыл бұрын

Without ISTA, I try to start engine. after no push the brake and start key on & off 4~5 times. There's no problem driving my car. I upload my youtube this processing. thks^^

@marianogambardella668 Жыл бұрын

Please, do not try to start the engine without performing a bleeding procedure. This can cause high pressure fuel pump damage.

@DaddysPlay Жыл бұрын

@@marianogambardella668 Yes, you're right. I'll perform bleed air procedure next time. 😊

@dpayne8611 Жыл бұрын

@@marianogambardella668Not even the BMW mechanic does it, they just fill back the fuel and starts it.