BMW No Ignition , No Start , RED Steering Lock Sign

Рет қаралды 67,480

2 жыл бұрын

Short video on how to UNLOCK the ESL (Electronic Steering Lock) on BMW Cars when you have no ignition with the key , the car won't start and you will have a RED Steering wheel on the display with a lock on it.
You would need some basic BMW tools like EDIABAS and Ediabas Toolset32 + a cheap INPA cable.
Procedure would take 2 minutes if you have the tools.
With Ediabas ToolSet32 you will need to load "CAS.PRG" and execute two procedures :
steuern_elvcounter_cas_loeschen - ELV Counter clear in CAS
steuern_elvcounter_elv_loeschen - ELV Counter clear in ELV
After that , turn ignition off , then on and start the car.
If you need any DSG (Stock or Remapped) files or really need my help you can get my contact details here : www.evosoft.dk/tech.html
FRF / SGO to BIN and BIN to SGO / FRF for DSG conversion also possible , as a service at
www.dsgfiles.com

Пікірлер: 30

@Eddie5012 5 ай бұрын

This guy’s video just saved me about $1000, a new steering wheel column, and a trip to the dealership. Thank You 🙏 🎉

@CallumAtwal 2 жыл бұрын

6:20 the actual fix starts here. Cheers, this video helped!

@mynameis248 3 ай бұрын

Hey man, this video actually helped me fix this problem over a year ago; Since this was recommended to me again, I just wanted to say thanks.

@E-Tuning Ай бұрын

Thanks to your video I got my car to work again. Been looking at so many videos and no one would work for my problem. So thanks alot for the video ☝🏼

@AlexCapi 2 жыл бұрын

I love you so much man, I don’t know what I would have done without this. Thank you so much ❤️

@batmanbtch958 7 ай бұрын

i dont have a car nor a problem. but i find it very interesting sharing with ppl ur experience and knowledge. thank u so much

@filipz5038 Жыл бұрын

The red steering lock sign showed to me last night and i couldnt start the car after few minutes of trying to start the car it disappeared but it showed asists failure and i still could start the car (I was 300km far from home to watch drift race and asked for help few mechanics there and they told me what could be broken and that i should get it to service and i felt helpless, also no one had diagnostic there and i thought the battery was OK) steering wheel unlocked but there was asists failure and we tried to start the car by pushing it which didnt work. Then we disconnected the battery for 5 minutes and it showed the steering wheel lock again. The SOLUTION WAS START THE CAR WITH CABELS ( it was just low battery bcs i left charger in cigarette lighter i guess). I tried to start the car this mornig after 4 hour drive home last night and everything seems fine.

@cesarjorgemurillobarientos1813 2 жыл бұрын

very good

@sondreloken6150 Жыл бұрын

It worked for me😁 but the problem come back after a while and it worked again, but do you know why it came back?

@surinasuhaimi769 Жыл бұрын

Gonna try this

@BmwMe-uh9sy 9 ай бұрын

i cleared the warning but it still wouldnt strt

@oriater 8 ай бұрын

Thank you sir your God send Blessings

@livelifecafeanddjschool7454 2 жыл бұрын

Hi I have the same issue now, can you least help fix it?

@anthonycienegaarmenta4513 11 ай бұрын

Which ones am i suppposed to download please help

@robinodegelder9537 2 жыл бұрын

Wil it reset the tune stage 2?

@dobroslavpetrov2827 4 ай бұрын

Amazing

@dashtyATG Жыл бұрын

Thank you for your time. Quick question please what year was it? and how about if we just bypass the steering lock with mk3 emulator?

@wontonybunbonny Жыл бұрын

Ista + will reset it as cas fault

@jamesperry6672 2 жыл бұрын

I had this same issue with my e90. Had me stumped for a bit 😊

@luiscruz-rl5mg 2 жыл бұрын

How did you fix it?

@DannyZee Жыл бұрын

I love you

@gintarassavickas4833 Жыл бұрын

Got same problem, when l try to reset evl, its come up with ediabas error 13. Data transmission to interface distrupted. Any ideas please?

@ramondsalmon4417 3 ай бұрын

So I need to change the column first

@rethabileramohanoe5955 Жыл бұрын

I just had the same problem today n I was so frustrated worse I am a woman n I know nothing about cars

@mohammadissa9962 2 жыл бұрын

Hello jax, I tried the same but it's not starting. Any thoughts of what would be the problem?

@wailmoh3715 2 жыл бұрын

Salam Vérifie les fusibles Le problème est entre module Cas et Elv. Il faut effacer les défauts module cas et synchroniser cas elv avec inpa ou ista d.. Sinon il existe un émulateur elv

@wailmoh3715 2 жыл бұрын

Verifie tension batterie car si elle est faible tu ne pourras pas faire la synchronisation cas elv

@mohammadissa9962 2 жыл бұрын

Thanks wail, i checked the fuzes and the battery voltage all seemed fine, however i disconnected the battery for a full day then i started the car it started then i earased all elf and cas codes by special functions on autotel scanner. It worked and all good now. Thanks 😊