Why pay someone for an oil change when it's this easy? Thanks for watching! Oil Service Kits: goo.gl/RvyHMG Oil Filter Wrench: goo.gl/QPBdpx ECS Oil Filter Housing Cap: goo.gl/bmdqzy

Why did this feel like my worlds were colliding when I saw Zach on screen on anything other than a Donut media video 😄 Great video as always!

Zac when did you join donut media??!

Make sure all parts are from ECS Tuning and always wear ECS Tuning gloves during installation.

I just installed the ECS oil cap while changing the oil for my N55. Absolutely Love it! Great solid construction, very well anodized, and much easier to work with. Fit like a glove!

Danggg clean Zach

Thanks ecs tuning! I've got a 335i xdrive coupe m-sport package. I'm going to do my own maintenance.

Hey its Z.J.!! Now here's a tutorial that's easy on the eyes

Personally, I'd recommend against the ECS magnetic drain plug. Mine sheared off in the oil pan on my third oil change. Had an IPD magnetic drain plug in my Volvo for 17 years - never had a problem.

is this the same dude from donut media money pit?

More DIY videos please

Funny to see baby Zac

There seems to be a common denominator of the modern cartridge type oil filters which will take some getting used to especially after years of the spin on filters wheee the oil pan was drained first and filter was removed while oil was draining. Note how he removed the filter first. The logic is that loosening the filter housing allows more of the old oil to drain out of the filter housing. This step has been noticed when watching Y/T videos for other vehicles.

How do you reset the oil life on the idrive system?

I use Hengst (German) oil filters for my 2011 F10 bmw. They're just better made than Mann Filters!

Is it Zach from Donut Media? Absolutely love this guy. You should watch some series on donut media of him. This guys know a lot.

BMW says to Prime the oil system during oil changes in oil filter housing changes, there are a couple handfuls of peoples n55 seizing up do to not priming the oil system

I think you guys should do a DIY k04 swap instructional video.

Where can I find the plastic part you transferred into the aluminum oil filter housing.

Thank you

Where can I get that socket ?

I would have poured some oil into the oil filter housing also.

I do not use gloves, those mechanic gloves suck if the they get soaked in fluids. Rather have latex gloves. All about touch and feel boys and girls. I have never someone torque a drain bolt to spec though, that was fancy. Most people do over torque and strip it out! Glad it was by the book so to speak

A good, simple video. Thanks.

I've got a 135 with the n55 but I don't have a lift. Will the pan drain if put the front of the car on ramps?

I wish ECS Tuning had an app

Thank you Zack Jobe

The billet oil filter housing caps.....inwould be interested in finding out if you sell the billet aluminum caps for other vehicles......That could be a lucrative market if you can get the design, r/d, and any manufacturers copy right issues sorted out. The plastic housings I can already see are cheap and subject to either breaking or worse hair line crack that may not be so obvious until you get the oil leak and either burning off against the metal of the block or as a severe case total oil loss. I will check their website, thanks!

I’m not tripping right this is the same guy from Donut Media now

I was curious after reading about priming oil after fill??

That E46 M3 in the Back :-)

What’s the size of the oil filter wrench?

More f10 n55 xdrive diy’s pls.

I have a 2011 135i n55 DCT 7 speed. Do I use 0W-30 or 5W-30? How hard is it to replace the oil filter gasket and oil cooler seal at the same time I do an oil change? PPI said oil gasket was leaking.

Thank you for producing this! I'm about to go to the link and order your kit. Did you empty all 7 quarts into the engine or did you stop a little short on the seventh quart?

Hey your suppose to be at donut Right now.

Wow it’s Zach jobe

The real reason why people don't DIY oil changes B/c its sucha bitch to actually drain it comfortably. You need buy all the diff. jacks /tools to properly and SAFELY jack it up.

Good video, but one click only on the torque wrench.

5w30 viscosity is not too low ? 0w40 or 5w40 would be better, because the N55 works very hot

25 newton meters is 18.44 ft-lb torque right?

Zach from donut

Wtf Zach ? What’s up dude ! Cyphs? Got some questions

it's the guy from Donut media

My cage from my old filter housing had a spring in the center. Does this need to be transferred to the new filter housing?

Awesome Nice presentation More diy vids please!

Did you really destroyed all those inappropriate gloves?

the oil filter housing cap is available for a 318d f30 2016 b47 engine?

I can't understand what tool you use when you say "Tighten it to 25..." What tool is it and 25 what?? Thanks

zack jobe before donut

This guy seeeems familiarrrrrr

😳😳 donut man

hello~... I am a 520d f10 2010 version (although I bought it on year 2011 new) owner driver from S. Korea. I have a question in regards to self battery replacement for my bimmer. I know this much, even if I replace the battery... until I register it as a new batter, the system will still regard it as the old battery ( currently I've been having battery replacement warning light for almost 2 years) and I won't be getting rid of this alert sign on my dash board. But either way, if I still want to go through with replacing my battery even with this issue, do I need to have my charger connected on the front bonnet of the car while replacing the battery at the back trunk? I remember someone telling me if I try to exchange battery without this procedure will result in total power out from the car which then would mess up the whole system program and will end up causing me to pay huge amount at the certified BMW A/S center for restoration. Is that the case?

Any one with a full video of an oil change for an n55/f32 (435i)? Please!

Hi Is there a requirement to follow the BMW Oil System Priming Procedure as described here kzfaq.info/get/bejne/d7p6aLJ_rbXSl40.html ? My local mechanic also mentioned that you can blow the N55 if you don't do this? What is your advice? Thanks

oh shit it's the Donut Media guy

which engine oil for bmw 316i f30 model 2014

Do you have to use that specific oil?

What is the oil spec for the F30 B48 engine ?

I just installed your oil filter cap on my F10 N55 just like the one in this video. The stock cage I swapped over clicks in and aligned with the outer tabs but doesn’t sit flush due to the 2 tabs sticking up in the middle. Is this normal? I don’t want dirty oil flowing past my filter.

How often oil change is required with these N55 Engines? Every 10,000 km etc....please let me know

CoooL

My N55 2011 335i oil drain plug is in a different spot... wtf?

Whait.. Is this Zack from 🍩?

Is this Zach from donut media?!

Это сервис или аптека ?

I recently went to bmw and they said they don’t sell 5w-30 anymore they only had 0w-30

Why have you changed the housing

I want the music name

I feel sorry for the people who pay $200 at the dealership lol

and that's about $300 !

Is this the same dude from Donut medias the money pit?

Donut Media!!!!

He's at donut media now right?

Bmw oil is .. i dont wanna say the “worset” but never think of something else other than liqui moly.

Would never ever put 5w30 oil in a turbo its a very thin oil to start with, once its been through a turbo it will turn to water...

Bruh ur gloves are way too thick.

A WORD OF WARNING. I JUST BOUGHT A BMW WATER PUMP AND THERMOSTAT FROM THESE PEOPLE AND BOTH ARE NO GOOD. THEIR ORDERING SYSTEM SHOWS THE PUMP FITS MY CAR, THE WRONG PART ARRIVED SO I CHECKED AGAIN ON THEIR WEBSITE UNDER "DOES IT FIT MY CAR" AND IT SAYS "NO DOES NOT FIT MY CAR" THE OTHER PART A THERMOSTAT IS A USED PART WITH ENGINE GRIME AND WATER SPOTS ON IT. IT WAS PREVIOUSLY INSTALLED IN ANOTHER VEHICLE.

After change oil fliter , I cannot remove the 86.4 mm wrench ( just like the one in your video)from fliter housing cap, how should I do now?