Thank you. Your video gave me the little confidence I needed to this job myself and save not only money but time. My LED replacement was also from e-bay but did not come with the protective plate or all the rubber grommets needed for installation. Had to remove the old ones, tore one but it remained serviceable. A process but well worth it and your video was instrumental in my decision to do it myself in about a half hour of work. Thanks! BTW, my bike is a 2009 R1200GSA.

I returned from the BMWRA Rally 4 am, until Dawn, on interstate 40. That LED WORKED GREAT! I’ve always been anxious about Road debris, but all the light remedied that!!

Sérgio, many thanks for your support & the file for 3D print of the spacer - works perfect for me!👍🏻👍🏻👍🏻

A top man and a great help with fitting my headlight that was too high...made the installation very easy with this great video thank you and keep up the great work 👌

Hello, i guess I owed you an explination regarding turnsignals error, fast blinking. Prior to owning the R1200GS I've owned an 2008 F800GS and bought for that bike led turnsignals but dind't installed them. So I swapped the old ones with the fast blinking from the R, put the F800 ones in and problem solved :). No dash error and no fast blinking.

Well all need these LEDs for safety and a modern look. Great work and video.

Thank you very much for your brilliant video and for sharing your experiences with the LED conversion. I recently bought a similar headlight, and I have the same issue with the instability due to the bottom fixing point. I am very impressed with your engineering skills and ability to "just" create the part, you needed. I tried designing something similar with a Stanley knife and some rubber - not as successful as yours ;-) Therefore I have send you an email kindly requesting the 3D print file. I hope you're still able to share it. Thanks again! B/R Esben

Thank you for this video: i just finished the upgrade of my R1200GS from 2009 white watching it. I just need to watch how to do the light level adjustment, and it’s fully done. 🏍🤙🏼

Top guy - a great instructional video. You have gone the extra mile by sending me your unique spacer.. Thank You😀😀

Thank you Sergio for this great vid and sending me your spacer for the headlight! Awesome

Nice vid. Thinking about this upgrade also. Like the big hammer on your workbench for the minimum required toolset...

Your video inspired me to make the change I had now added the LED Blinkers and the main light and I love it, it looks great and I will enjoy it on my rides

Awesome...looking forward to any developments you have with a vertical adjuster...

Thank you so much for the patient instruction on completing this task, for I bought the same headlight for my 2006 GSA! I haven't completed it, just studying. I see that my wires are black white and yellow and the parking light * I suppose* is red. Don't see where it attaches. But, removal of the instrument cluster, etc., are what I needed to see!! Thanks so much.

Great video! Thanks 😁👍🏻 looks so much better!

Very good and informative video definitely be converting my front lights to led

I'm really surprised that a $150 lighting kit off Aliexpress doesn't make the BMW computer throw up error codes. Since it doesn't, this seems like a fun upgrade. BTW, I find installing and removing big rubber grommets easier if you squirt them with some silicone lubricant first. If you don't have access to a 3d printer you could probably fill the space with JBWeld.

Loved your video, man!

Great job

A ideia do espaçador está incrível... as voltas que dei à cabeça para perceber como poderia fazer para resolver a questão da folga da borracha do Farol... E mais uma vez, obrigado pela disponibilidade para fornecer o ficheiro e o espaçador. Cumprimentos do norte e sucesso para o canal. Luis Coelho

Really Amazing !! This headlight transform this bike!!

Nice Video !

Hi , love the videos .. just wondering have you fitted the resistors for the indicators yet ?

Nice job Man really Pro

Show o vídeo bem explicado!!! Abraço amigo direito do Brazil.....

Bro u are a great person!

thanks for the awesome guide!

Thx for the detailed instructions. Maybe you could upload the stl-file of the spacer?

Thank you, very informative Excellent mod

Great video. Helped sooo much with the install !!

tq for your vid.This Beast still legend and the best

Hey there! as far as I know you can program the bmw unit so it will work with led blinkers, no need to add resistors 😉

Great video really enjoyed very helpfully, are u still enjoying the led head light ?

Excelente vídeo e explicação. Estou tentado a instalar um igual na minha GS de 2009, seria possível disponibilizar-me o ficheiro do espaçador ? Obrigado

Hi, you made a really useful video. Congratulation. It helps a lot for the headlight conversion. Do you have the stl. or some other file extension to print that spacer? It will be really helpful I think if you can share with us. Thanks

Thank you for your nice video. With the help of your video I was also able to exchange my headlight (r1200GS 2012) for a LED one. I do have the problem that it keeps moving, so if you could help me with the file for the 3D print.

I am looking to make the up grade with this new led head light but at the same time I was kind of scare to end up with a mess. Your video instade show clearly the work to be done and how to be done. The difference is that you are a pro and I an amatorial 😅😅! One thing I need from you if it is possible, to buy the 3D spacer from you. I have a 1200 adv 2006, I think that would be same to moto. Look for your kind reply and really great job 👏👏

Hey mate. Greetings from Australia. Just bought the same head unit will be fitting it tomorrow. Thanks for the help. Do you sell those spacers? Or would you share the file for 3d printing? Loving the channel.. Thanks mate. D

Super movie. A few days ago I received a led lamp for BMW 1200gs 2009. But unfortunately it arrived with a damaged meter base mount and I need to fix it

What brand of crash bar is that ? Great video 👍

Super great videos, thank's to you a buy one too. Can you share the file with the plastic piece to print it with an 3D printer ? Thank's !

Hello, i just did my own led light. Step by step withe this awesume vid! But did you fix the turn signals. So that thee will blink normal speed?

Hi. What a great detailed video description. Thank you for the information. I subscribed. From South Africa. Will it be possible for me to purchase the 3d printed part from you? I do not have access to a printer. I am looking forward to your next videos.

Great video! I`m more confident now in making the change for my 2009 GS. will be really helpful if you could send me the spacer file. many thanks!

Great Video - looks simple to fit! I'm waiting to receive the unit from China but would appreciate if you could send your 3D STL file?

Thanks for the video. Just sent you an email asking for the file, hope you still have it somewhere.

Nice video. Could you tell me who makes your upper tank guard bars?

Do you have a link for the headlight unit? Thanks for the video, also would the genuine bmw indicators already have the resistors in place as I saw another video & they were plug n play? 👍😎

What a great video! I also bought one. Can I buy the spacer from you? I don't have a 3d printer myself :)

Muito bom!

Hi, dude. This is very good resolution. I have same problem with light. Do you have above the picture from print on the sale ? Thank you ...

Hello, can I mount this headlight on a K100 from 1985 ? I turned it into a scrambler

Brilliant job! Thank you. Do you have the link where I can buy one of them?

Hello, thank you for your superb video! Would it be possible to have the small 3D printed part to make the adjustment? Thanks in advance!

Nice video. Will it be possible for me to purchase the 3d printed part from you? I do not have access to a printer.

Looks great but dose it put a bulb warning for the headlight ?

Hi great video how do you fix the fast blinking turn signal?

Hello, nice job. Is it possible to get the stl-file for the spacer? Some wishes from germany Leo

what crash bars are they? they are amazing, btw I fixed that bottom issue of the headlight moving by cable tying that rubber Gromit from both sides so it stays put, worked perfectly

Hi man! Great video! Could you send me the spacer file? Thx man!

I’ll take the headlight protection please

Where did you get the turn signals. I got a 2007 GSA already with the LED headlight but would like to upgrade the turn signals

Hi. What cash bars usted you motorcycle... after the change lights, the desk or computer show error on diplay?

Thanks for sharing. I bought it! How can I contact with you about that little plastic part?

Hey can you send the link for the front headlight assembly?!

Nice Video! I also bought the LED Headlamp, but it wiggles aswell. I hope you could sent me the File, so I can print it myself. I just sent you an E-Mail. Clever people helping others with clever ideas ;)

Seems like a major design flaw that the LED headlight housing doesn't have any provision to aim the beam. There's no point in having a brighter light if it's not shining in the right place.

Thank you for this awesome video! I send you an email so if you can send me the stl file! Keep on the great job!

Hello friend, I think your video on installing the LED lamp for the BMW K25 is great. I've bought the lamp and I'm having an issue with vibration, could you please help me with the file for 3D printing? Greetings from Colombia.

Amazing! How can I get the file for 3D printing?

Does the headlight more kabels or somthing like the backlight? (Your other video)

I just watch your video about the new light on yoursBMW 2007 was it any good did it do the job very good please can you let me know Terry

Just bought a led unit for my 2006 GS, how could I get hold of one of those spacers as don’t have a 3d printer?

What about headlamp conversions for K1300R 2014? Seen K1300R replacements but also R1300GS[?] conversion for K1300R, too. Any experience with that?

Olá efectuei a mesma alteração que VC fez mas o farol treme muito será que há a possibilidade de me fazer uma anilha igual á sua e eu pago todos os custos

It's the same model year bike, but with the headlamps, the fuel gauge doesn't work, and the fuel warning light works. Do you know the solution?

Is there any sort of assembling or adjustment at the electronic control Unit necessary, when switching to LED headlight?

sorry, but can you adjust the light according to the weight on the bike as you do with the original headlight?

Hi I have received the printed gadget for my LED headlight it fits fine many thanks ...

Hello, where can I buy the piece that you have made to hold the headlight so that it does not move?

Hi once I fitted mine I needed to adjust i as the beem is too low, how do I do this or are they fixed.? Thanks

Thank you for a great video. I have same issue with the headlight shaking. It would be great help if you can share the stl file for the spacer. How can i get that from you? Thanks in advance!

hey is your computer give a warning ? after running the new led light .

Hello, So I did this job on my 2008 R1200GS and now I have the same issue with the turn signals. Can you please let my know what resistors did you use to remove the error from dash and stop the fast blinking? Many thanks for you time

Hello Sir. Thanks for the helpfull video. Can you send me the drawing of the part you made on the 3D printer? Kind regards, Arjan Kramer

Hello my friend. I would have liked to have your spacer. How to contact you? Thank you for this great video!

Hello Sergio, First time here I bought 2007 the same color for my 40 birthday, so how can I request for you the spacer please?

First, congrats for your Video and work!! In the Video you talk about the spacer and in case you send the data of the spacer for 3d print. Please i need your mailadress to go in contact with you?! Thx and best regards Peter

Hi, just received my new headlight. Can I get a spacer from you?

I need to get in contact with U I need a piece on 3D print that you might be able to help me as I saw this great video I imagine you kan do it

Would this work in the f800st?

Hi, friend. I bought a headlight from China like yours. Very low light. Can you file please.

Hi, can you tell me the dimensions of that small piece? Or send me the file so i can print it?

nao tiveste alertas no ecran a respeito dos LED ? queria fazer algo semelhante, mas a idea de ter o alarma me tem colocado de pe atras. ..... i piscar rapido se resolve com a resistencia, a minha preocupacao sera mesmo o triangulo no ecran

Hi i need the stl file for the spacer Thanks!!!!

how much are you asking for the little 3d printed piece?

Podes mandar o link de onde compraste o farol da frente

Very good vídeo. Puedes mandarme el fichero para imprimir la pieza 3D? Obrigado.

Where can i buy this one & how much ?

Brother i hope u can help me, i buy the same headlight it came today but my conection wires dont fit on my bikes i can sent u a picture?