BMW R1200RT ( 2014-2018 ) FRONT WHEEL REMOVAL AND TIRE REPLACEMENT.

No video

BMW R1200RT ( 2014-2018 ) FRONT WHEEL REMOVAL AND TIRE REPLACEMENT.

Рет қаралды 36,410

3 жыл бұрын

TO PURCHASE Motion Pro 08-0536 BeadPro Forged Steel Tire Bead Breaker and Lever Tool Set. Please click link below:
amzn.to/39amIzl
TO PURCHASE MICHELIN Road 5 Touring Radial Tire-120/70ZR-17 (58W) 58Y. Please click link below:
amzn.to/3lxDmyF

Пікірлер: 41

@rolyf100 3 жыл бұрын

Very helpful. A couple tips: you mean tire bead, not tire beam, and the thing inside the valve stem which you unscrewed is the actual valve. It’s called a Schrader Valve. Thanks for the DIY.

@bosconiantrade6181 3 жыл бұрын

Yeaph you were right about that. Thanks

@toonrockstelly4044 Жыл бұрын

Absolutely brilliant! Thank you so much for video….massively helpful 😃

@aligky 11 ай бұрын

Awesome video, exactly what i needed and to the point.

@PhilTrompetter 2 жыл бұрын

This is an outstandingly clear and well made video.

@bosconiantrade6181 2 жыл бұрын

Thank you Phil. Although I made a few Typos on my other videos. I'll be making more videos in the future and I hope it will help a lot of motorist. Have a wonderful day Phil.

@062809 2 жыл бұрын

Thanks, very helpful. *Sweet torque wrench.

@davesmith7748 7 ай бұрын

So where were the 2 pops as you first inflated the tyre?....sorry tire. It will pop as either side bead crosses the ridges around the wheel.....this way you know it has seated correctly......usually you then reduce pressure to the correct value for riding. Then check the rubber lines around the tyre to see if parallel with rim to make sure its concentric.

@bosconiantrade6181 7 ай бұрын

Thank you for the tips. I'll do that next time I change the front tire but for the rear one I always bring to the shop to get it pop.

@AR-uf1zx 2 жыл бұрын

Good video. I would suggest putting some blocks or something underneath the rim so you dont warp the rotors.

@bosconiantrade6181 2 жыл бұрын

Good idea. Thank you.

@user-wh1se7mt2e Жыл бұрын

Great video

@h5162k 2 жыл бұрын

nice video and i feel cared for in your videos. you have a wonderful life.

@bosconiantrade6181 2 жыл бұрын

Thank you

@mirko.jankovic Жыл бұрын

nice job!

@bosconiantrade6181 Жыл бұрын

Thank you.

@user-wh1se7mt2e Жыл бұрын

What grease do you use on the spacer and quick release shaft? Can I pick that up at the auto parts store?

@bosconiantrade6181 Жыл бұрын

Auto Zone

@kevinraabe457 2 жыл бұрын

Coolvid

@sven-t 3 жыл бұрын

Nice video. only one thing I wonder. Why would you change your tire yourself without a tire machine? For 10euro or dollar you can have it done at your local motorcycle shop. otherwise a beautiful bike.

@bosconiantrade6181 3 жыл бұрын

Actually I did it out of curious sake. It's my first time doing it. If you ask me if I want to do it again after 7 years hmmmm...well I don't know I'll be 68 yrs old by then. Yeaph maybe I'll just go to the shop and have it done. Thank you.

@bosconiantrade6181 Жыл бұрын

@@Electromag50 That's great!

@letigreblanc4313 3 жыл бұрын

Thanks for this useful tuto now i will not be be afraid to do it myself Just let ask you few questions how many Km you got on your bike ? do you use it every day ? but most important HOW CAN YOU HAVE A BIKE SO SHINNING spécially the exhaust ? please help us best regards

@bosconiantrade6181 3 жыл бұрын

I average about 1400 to 1600 miles a year. I'm trying to preserve it as much as I could. So maybe one day may one of my grandkids or future great grandkids can enjoy it. To keep the chrome shiny. I use recommended cleaning stuff that are safe for the bike. Ride safe have a great day.

@nikolayzhivkov4678 2 жыл бұрын

Thank you, very informative. Only you missing are torque values for all of bolt junction.

@bosconiantrade6181 2 жыл бұрын

Hi! Nikolay. I did that intentionally for the following reasons: Torque Values are critical. Mechanics should always recheck torque values " in Accordance with Manufacturers Specifications because they can be modified and change for newer models. Normally Quality Assurance Inspectors witness Torques in critical areas . For safety precautions I recommended for solo mechanics that they should always verify and confirm Torque Values through the Maintenance Manual specified for the bike. Have a safe ride.

@nikolayzhivkov4678 2 жыл бұрын

@@bosconiantrade6181 OK, completely understand you, thank you!

@Easy-rider30 Жыл бұрын

Nice vdeo, but I was wondering why you didn't bother to balance your tire?

@bosconiantrade6181 Жыл бұрын

As a matter of fact that will be on my next video. Stay tune. Maraming salamat ride safe mga utol.

@Easy-rider30 Жыл бұрын

@@bosconiantrade6181 Salamat din jan Tol. I just got the beemer 2013 and model 90 anniversary. ride safe din jan tol..

@MinhvuLy 3 жыл бұрын

Good job cababayan

@bosconiantrade6181 3 жыл бұрын

I like your scooters. I enjoy watching your videos.

@tomcat91783 2 жыл бұрын

What tool was used to remove the air valve?

@bosconiantrade6181 2 жыл бұрын

I used a Tire valve cover with stem core remover. Thank you for watching the video.

@martinlare9026 2 жыл бұрын

Voyant moteur s'allume sur le tableau de bord de ma moto bmw r1200rt.

@HILMISTUBE 3 жыл бұрын

Which brand of tyre did you installed on your BM? Thanks for the video.

@bosconiantrade6181 3 жыл бұрын

Michelin Road 5

@oleran4569 2 жыл бұрын

@@bosconiantrade6181 Now that you have ridden the Michelin Road 5s for a while, how do you like them? I'm thinking of putting them on my R1200RT.

@bosconiantrade6181 2 жыл бұрын

Very smooth specially on the curbs. Michellin Tires maybe a little bit pricy but it's worth what I paid for.

@oleran4569 2 жыл бұрын

@@bosconiantrade6181 Thank You! I have Micheleins on my baggers and love them, but wondered about handling on the BMW.

@johndelprado2825 3 жыл бұрын

BMW motorcycle