Get notification on phone. See Ridingwithtom has uploaded a video. Cry tears of joy.

So no excuses now... it's time to do a track day on the BMW :D

And that frame slider saved my knee once on my CBR600RR when some guy open a door in a middle of a road... Slider took the whole impact. Thanks R&G

Why so many haters. Tom is a nice guy. I think the stuff looks good. Plus it's his bike if he wants to put pink protectors on who cares. It's his.

Some nice upgrades, ride safe fella.

Nice looking ride Tom

Nice kit!

Hey Tom, Just thought i would put my 2 bobs worth in about frame sliders. I recently was riding my ninja 250 when a 4WD pulled out in front of me on an 80kph road and to be honest frame sliders literally saved most of my bike. From an 80kph crash where the bike slid probably 20 metres i only had about a 5cm circle scratch on my fairing and a little chunk taken out of my exhaust and rear brake. The slider on my fairing was ground back about half way from sliding but in my opinion it saved a possible write off. So to anyone reading this, frame sliders from my experience do alot even at reasonable speed. Btw love the videos keep them up buddy :)

That tail tidy makes the bike look so much better!

Looks Nice !!! Well Done

That bike is such a BEAST!

The bikes looking great

Exactly the same as my S1000RR now. Highly recommend the LED indicators though, and the R&G crash guard for the Akrapovic exhaust! ;)

You still have the lizzard! :D nice bike Tom, greetings from Argentina!

Amazing bike bro

Lookin good!

cable tied my radiator guard too, sketchy as hell but holds up just fine even with the heat here.

The new 2015 bmw s1000xr look so cool!

This is the same as putting a case on your brand new phone, I rather take a risk of it falling than riding around with those ugly covers on.

i like the way you say "DONE"

Hey Tom I was thinking of getting the bulk of the R&G items you have installed here so a timely vid indeed. Would be epic if you could provide some feedback on my questions. The R&G engine casings I haven't committed to them as the bike runs very hot most days and coming into summer i'm already seeing 100 degrees+. Have you noticed an increase in temp gauge readings post install? I'm leaning towards the yoshimura case protectors as they cover the portions most likely to get damaged in a slow drop or stationary drop type scenario and don't fully cover the engine casing, which allows for heat dissipation. In your fiddling with the oil and rad guard could there have been a more permanent way of fixing each piece? I am actually shocked the pack and instructions come with zip ties, unless I can find guards that somehow bolt in amongst the fairing mount points i'll have to buy these and custom up something myself. Cheers mate

I love your watch. Also iv been riding my sv650 for 4 years now and 1 thing I can say is that I trust zip ties more then bolts. Bolts can unscrew themselves zip ties can't

Nice bike m8

Great Video like always..... I need to get sliders on my bike : D

Keep the work up your doing very well at your videos, thanks RidingWithTom... PLEASE READ

Good video 👍

R&G make some awesome stuff.. Ive got plenty on my Street Triple should the worst happen

The all black engine area makes it look more aggressive nice touch from R&G

looks good :)

Looking good , Im having protective gear installed on my bike .( red 2015 s1000rr )

i think a little loctite wouldn't have hurt? with all the vibrations around those parts, they might come undone?

I don't know how I feel about using cable ties to hold something that could flip you off your bike if it fell off while you were riding... but a lot of radiator guards seem to be designed like that

That was really fanny mate. You got thumbs up just for those first engine covers.

Lol now you gotta sponsor R&G in your videos lol

just a question why do people actually hide their number plates, what can you gain from a plate? just seen people doing this when selling their bikes/cars.

When you ride what brand they look comfortable in your vids

WHAT im so jealous they sent you all that :O you one lucky man haha :)

hey Tom, are you not getting any aftermarket exhaust ?

Crashpro for the win!

Can you do a Video where you show ur camera view and stuff so Kind of a helmed setup

To be honest... r&g tail tidy is cheap and it looks it. I recommend the evotech products as they are far more premium looking and easier to fit. No soldering required and for the rad cover .. no plastic ties 👍🏼

honestly i like how the protection looks like, the only thing im kinda eh on are the frame sliders..i'd still put em on the bike tho..can never be too safe:P

YOU HAVE A BEARDED DRAGONNNNNNN !? We're soul mate's xD

Sick

Goddamnit i'm jealous for that bike..

I'm sure someone has already asked but there's a lot of comments on your videos, but what's the outro song??

Hey Tom how much would a crash kit like that usually cost?

Have you seen the 2015 model of the bmw s1000rr?

Tom, do you go to work in a suit or riding gear?

tom you now need a gold chain!

Can you do a review on some more bikes new lams bike MT07 ??

Such a nice bike. One day....

a bit of a cold over there mate

I felt it was weird when I cable tied my R&G rad guard on my beemer too but 2 years later she's holding up nicely

What camera are you using in this video?

Could you test ride the ducati monster 696

I have to agree with some of the comments. Way too much R&G which detracts from the bike itself. I understand branding but that's just a tad over kill. i'm surprised they didn't make a "protective cover" for the bmw logos with more R&G to make it the R&G S1000RR.

Lol tom needed this... Jk he is an amazing rider

Now your Bike is heavyer!

How much did/would it cost to buy all the protection?

If you didn't, I would put a little threadlock on the spools or else you may lose them over time.

Is that a stock exhaust?

What kind of gloves do you use

I dont think it looks bad at all. If you really care about your bike you'll get the protection for it, you rarely notice whats on it and im sure you'll forget about the stuff on it so it doesnt hurt anything.

You lucky dog!

The bolts aren't done up tightly so that if you crash, the bolts break instead of your engine casing cracking.

No exhaust slider?

TOM WHAT DO YOU DO FOR A LIVING

DONE!!!!!

You forgot to mention the Radiator and Oil Cooler Guard at the end.

I would swap those silver bolts out with some matt black ones

imo the engine case should have come with black bolts.

you should really take the stickers off of all of the engine covers. Not any of the sliders though, they don't look bad.

Now crash it. Or isnt the protection stuff used for?

R&G Bar Ends?

A little nit picky here, but I wish they would have made it so the logos on the first two pieces you put on were both horizontal and not one cockeyed and one horizontal. It would look a lot nicer.

Gotta love people saying "if you can afford a 15k bike you can afford to fix it". that is such bullshit i feel stupid even repeating it.

Nicely done mate! I hope you do more of these videos. Can someone tell me the purpose of the sock though?

Why cant we see his plate?

should definitely tint the wind shield

You need black screws for the engine covers. :D

Cool lizard but, it looks small, how old is it ?

I'm sure I seen all this gear on you're bike 2 months ago lol

Lots of protection there to save cash if it's dropped but I'd hate their logo everywhere.

RnG...RnG everywhere.... but i love it, except RnG stickers :-)))

Is this syndicate gamer??

R&G Case covers R&G Radiator guard R&G Bearded dragon

Dude a Casio calc watch lol

If you wreck going 25mph the sliders will brake your fairing. Your better off with out them.

If tom buys another bike, he should by the new Kawasaki H2!!!!!!!!!!!

***** you should of gently put the bike on its side to show all the contact points are protected

Dat bike.......sooooo freakin sexy!

35 likes and a dislike and I've watched 4min of it.......... I was view #4 xD

Should call it 'The Bat'

This Bike looks like a Shark

Bike looks more sexier 😍

love your hairy arms. hairy just like mine ;)

Second! I just wanna thank my mom without her my phone bill wouldn't have been paid an I wouldn't be in this position thanks mom!

I Have a Schuberth SR1 Tech black Large that would suit u and your bike colours, u can b the Aussie Marcel Irnie

reservoir sock 11:02 ..never fans of that..much like condom my opinion