BMW Vanos Removal | BMW E36 & E39

BMW Vanos Removal | BMW E36 & E39 | M50 & M52 TU Engine

Рет қаралды 1,506

2 ай бұрын

Hi, in this video, I'll show you how to do a BMW Vanos Removal Step-by-step on a BMW M52 / M52 TU engine, as fitted to BMW E36 (323i, 325i, 328i) and E39 cars (523i, 525i, 528i). It is necessary to remove the single Vanos completely from the engine if you want to repair it and yes, it can be a bit of a tricky job, but this How To video seeks to show you what is involved in the work.
To Remove a M50 / M52 Vanos, you will need some specialist tools that allow you to lock the engine timing and to advance the exhaust camshaft position, which frees off the single vanos so that it can be removed from the car. I will list some of these tools below, but please do your research or ask questions of the sellers to make sure that they suit your engine as the M52 Vanos and engines do vary some during production and in different regions.
🔥 OUT NOW BMW VANOS PART 2 (Rebuild & Refit), it’s here! 👉 • BMW VANOS Rebuild & Re...
💥 Please consider SUBSCRIBING for MORE Great Car DIY Content!: 👉 kzfaq.info...
🙏 To Share this E36 Vanos Removal Vid 👉 • BMW Vanos Removal | BM...
The car featured in this video is a E36 323i fitted with the M52
Vanos Timing Kit
👉 UK link: amzn.to/3TPSfyY
👉 USA link: amzn.to/4cxpcHy
Creator C110+ BMW Fault code reader
👉 UK link: amzn.to/3crKGYI
Creator C410 (C110+ superseded in USA)
👉 USA link: amzn.to/3kOlwYQ
Trim fasteners removal tools
👉 UK link: amzn.to/4cvrQgV
👉 USA link: amzn.to/371IRQo
00:03 BMW E36 Vanos Removal
00:16 Common BMW Vanos Symptoms
01:21 Remove Vanos Unit M50 / M52 Engine
02:25 Remove air box BMW E36
04:35 Remove Viscous Fan BMW E36 E39
06:22 Remove Coil Packs BMW E36 E39
08:42 Set engine to top dead centre M52 engine E36 E39
Affiliate links: This video and description contains affiliate links, which means that if you click on one of the product links, I may receive a small commission. I always try to link to parts and tools with the same criteria as I would if buying for myself, which is usually a balance of price, quality cost etc. In most cases (but not always, due to changing availability over time) the tools, parts etc are the exact ones that I used in the video.
Disclaimer - Please note that this video and its content is intended for information purposes only. Although every effort is made to ensure that all the information is correct, there is no guarantee that this is the case. This video should not be considered a substitute for seeking independent advice or the services of a professional. Any work that you carry out on your vehicle or vehicles in your care are at your own risk.
#E36 #M52 #Vanos #BMW

Пікірлер: 18

@ReviveMyRide 21 күн бұрын

💥 VANOS PART 2: Rebuild & Refit kzfaq.info/get/bejne/etSFqqpqxJ_bZ6M.html 💥

@jonzhovkliy8809 2 күн бұрын

Great video glad to have come across a proper vanos removal video thank you

@ReviveMyRide Күн бұрын

Thank you! Glad you liked it! If you’re interested, In the follow up vid we refurb the vanos and refit it👍 cheers, Phil

@jupward8468 2 ай бұрын

Can relate to the bloopers far too well. Nice to see you at the NEC this week! Looking forward to seeing more on this in the future.

@ReviveMyRide 2 ай бұрын

Good to meet you! Yeah, we had a great time at the Classic cars and restoration show 👍 I'm working on the next vid now, where we rebuild the vanos and refit it again, should be a good one! Cheers, Phil

@stemcleeds 2 ай бұрын

Great video, the best I've seen re vanos removal.

@ReviveMyRide 2 ай бұрын

Thanks very much! 👍😎

@andrewmclaughlin1086 2 ай бұрын

Please do the re install, I really trust your videos and am I waiting to do mine 😂 hope all is well

@ReviveMyRide 2 ай бұрын

Hi @andrewmclaughlin1086 very sorry, my intention was to issue the 2nd video the following weekend! We are currently selling our house and have been crazy busy getting it ready for sale. Thank you for the kind words about my content, really appreciate it, new vid out soon, I'm targeting it for this Sunday! 👍Cheers, Phil P.S. I like the spectrums that you do on your channel! 😀

@andrewmclaughlin1086 Ай бұрын

@@ReviveMyRide thank you so much they are from so long ago, and I look forward to seeing that video from you thanks hope the house selling went smooth

@bombakdik 29 күн бұрын

Very good, very clear and what a wonderful ease. I like that you only are using hand tools. Do you have the assembly as well? Cheers from Belgium.

@ReviveMyRide 18 күн бұрын

Thanks so much! Great to hear from a viewer from Belgium 🇧🇪 😎 Yes, I have a rebuild and then reassemble video, you can find it here, hope you enjoy it! Thanks, Phil BMW VANOS Rebuild & Replacement | E36 / E39 | EASY Step-by-Step Guide! kzfaq.info/get/bejne/etSFqqpqxJ_bZ6M.html

@eriksony6398 2 ай бұрын

Do you still work on Mercedes cars?

@ReviveMyRide 2 ай бұрын

Yes I do! Basically, the way I plan my work is just fixing what comes up as a problem on my small fleet of cars. The Merc has been pretty reliable, I’ve had the wheel bearing adjustment job a few months ago, the recent dead battery problem was on my Merc. Keep watching, I’m sure the Merc will break soon! 😂 thanks, Phil

@eriksony6398 2 ай бұрын

@@ReviveMyRide Hi Phil, We have a good scan tool for Mercedes benz cars, Do you want to test it? I want to send MG to you.

@eriksony6398 2 ай бұрын

Hello?

@ReviveMyRide 2 ай бұрын

@@eriksony6398 Sorry for the slow reply! Thank you for the offer, I already have a Merc Scanner, it is a TopDon Artidiag, can't remember the model but it does "almost" everything I need it to do. I'm having a problem with "SOS not ready" and it's the telecommunications unit that needs to be coded in (long story but it is from another car) but my understanding is that this is beyond most scanners and you need software and a device to do coding... but if your device can do this, give me a shout and I'd be glad to feature it! Cheers, Phil

@eriksony6398 2 ай бұрын

@@ReviveMyRide Yes, our scanner can do what Topdon do and more.