yup, my right rear spring rusted and broke at bottom (2004 E83). Thanks for the helpful vid. This does not look nearly as bad as I thought.
@erikslot70232 жыл бұрын
Saved me a lot of money! Got my springs replaced. Was a bit worried, at how low the shaft needed to go to fit the new one. But greasing, and a good kick, made the bottom part of the spring snap in place immediatly. Good stuff mate, thx for making a vid for this.
@UberXY4 жыл бұрын
Helpful. Tip: skip first six minutes.
@nilsbryde5 жыл бұрын
Thanks for showing how to replace this springs, I will start on this job on my 2007 X3 in some days, U saved me a lot of trouble, thanks again from Norway
@MOAB5 жыл бұрын
It was easier than i thought, but the little bottle jack is a must. thx for watching.
@campally5 жыл бұрын
Legend, made this so easy for me. Thanks heaps.
@danmc26784 жыл бұрын
Just did this. Do yourself a favor, disconnect the brake line bracket and sway bar end link. Especially the brake line bracket as there is a lot of pressure on it when cranking down on the lower control arm to insert the spring. The Bentley repair manual also says to disconnect the rear axle bolts but I didn't find that necessary.
@lamarrmingle59764 жыл бұрын
Good work!
@mariwanjalal91093 жыл бұрын
Thank you for sharing
@alexanderthegrape53704 жыл бұрын
Great video !! If you don't have a bottle jack like I did you can also use a small car jack. I almost tried the scissor jack that comes with the car 🤔🥴
@jackynails8095 жыл бұрын
Have to reemplace the plastic too the upper and bottom i did to my truck and fit perfect
@docyt4 жыл бұрын
I don't think they beef'ed it up for 2006. That's the year I have and am now watching your video to see how to replace mine ;)
@tylerjacobsen49582 жыл бұрын
Good video!!!
@MOAB2 жыл бұрын
Thanks!
@gabrieleloisa78872 жыл бұрын
Thank so much for your video. I mean it.
@MOAB2 жыл бұрын
You are so welcome!
@sniper_15375 жыл бұрын
I had to do the same but ..Mine has the M sports package...skinny coil at bottom like yours... those new springs looks like for a reg suspention....x3 see if this is 3.0Si your working on
@beernutsonline2 жыл бұрын
I think this is a very common fault on post 2000 cars, my cars from the 60's, 80's and 90's never breaks springs, but wifey's 2004 Audi and my late dad's X3 have broken both the rear ones.. :p Well, new ones acquired to be mounted as soon as the snow leaves! Thanks for the instructions, and the classic Simpsons clip! :D
@willwel55334 жыл бұрын
If you would have looked on Bimmerworld, they have replacement upgraded Bilstein B3 springs for $70 a piece. So $140 for the pair. A spring broke on me last year as well, so I bought these and replaced both. Sucks you didn't see the Bimmerworld springs, but oh well. Love the bottle jack technique, I just had a buddy pull down and I had to put them in real quick. I'll remember this for the next time.
@MOAB4 жыл бұрын
Now you tell me. LOL I looked all over on line and couldn't find any. I had never heard of Bimmerworld. Thx for watching.
@danmc26784 жыл бұрын
Ebay, just bought a pair of Bilstein springs for $140 - includes shipping.
@jameslillycrop49194 жыл бұрын
All I can say is what a cracking video there buddy I'm from the UK found this very helpful I will be changing my springs as both have snapped in the same position very informative well done
@nicks75482 жыл бұрын
Could you use spring compressor? You can get them for free with a deposit at Autozone or advanced. Have to do mine good video and feel your pain.
@tylerrouch57632 жыл бұрын
Not the one I tried.
@FahimMotoGP4 жыл бұрын
must remove lower sway bar link nut , it puts tremendous pressure on it when you push down. Don't need a jack get a wife, its better .
@joaquincannon78982 жыл бұрын
Sorry to be so off topic but does anyone know a method to get back into an instagram account? I somehow forgot the account password. I would love any assistance you can offer me.
@gaellucas87052 жыл бұрын
@Joaquin Cannon instablaster =)
@joaquincannon78982 жыл бұрын
@Gael Lucas thanks so much for your reply. I found the site on google and im waiting for the hacking stuff atm. Looks like it's gonna take quite some time so I will reply here later with my results.
@joaquincannon78982 жыл бұрын
@Gael Lucas it worked and I actually got access to my account again. Im so happy! Thanks so much, you saved my account :D
@gaellucas87052 жыл бұрын
@Joaquin Cannon happy to help :)
@drakedwyer47474 жыл бұрын
What's the name of that mini heavy duty Jack for spacing?
@MOAB4 жыл бұрын
I don't know the brand name, just a cheap Harbor Freight Jack. Less than $20 i think.
@kevinaustin37153 жыл бұрын
Bottle jack
@motorcyclegarage23075 жыл бұрын
Your uploaded video today has been blocked in the Uk - Which is a shame - have not got a clue why ?
@MOAB5 жыл бұрын
Yeh, I just saw that. I had the radio on in the back ground and AC/DC song was on so I am in the process of deleting the song. Thank you for the heads up.
@GoingShirtless4 жыл бұрын
@@MOAB Really? This is surely taking things a bit too far. Best not even THINK of a song while recording a video :) A good informative video non the less. I did a done a spring replacement on my two X3s about ten time now between them, and just had to see how the other guys are doing it and rather pleasingly my method seems very close to yours. I never did zip-tie the upper spring pad - I usually just stick it on the small nub on the top with some grease and it stays there long enough for me to manipulate the spring into its place.
@ericvolpe46692 жыл бұрын
As a mechanic I watch this video and cringe at every unsafe thing u are doing. I’m not trying to be a jerk. I just want other people that watch this and also attempt to do it themselves to be very aware of what u are doing. 1 little slip of that bottle jack while yours hands/fingers are up in there and u’d be in a world of pain and more than likely not be able to move. Like other people stated u should have disconnected the sway bar link and any other cables/lines to give u a lil more working room there for not needed that bottle jack at all. 99% of the time the broken spring should almost fall out, and the new one would take very little downward pressure on the hub. even just leaning on it with your other arm, hand or foot. Then when u were jacking up on the hat of the brake rotor. It shouldn’t have taken that much upward pressure and the jack wasn’t centered, which was very close to slipping off. Again I’m just trying to offer a few SAFER ways. Just the same u got it done. Luckily without any injuries. 👍🏼
@ioanmester26573 жыл бұрын
Se poate rupe amortizorul
@ioanmester26573 жыл бұрын
Punele și perne de aer
@ioanmester26573 жыл бұрын
Telescopul
@jimh.52865 жыл бұрын
That was too easy. I removed springs from a '73 Corvette (front) and a 1970 Oldsmobile. Had to use a spring compressor and disconnect the lower control arm from the spindle. Took many difficult hours. I was lucky I got it done without killing myself.
@MOAB5 жыл бұрын
Yes, I was surprised how easy it went with all my luck.