No video
Shimano Deore Freehub Body Replacement FH-M525
Рет қаралды 8,187
Күн бұрынWith the rising cost of bikes it is essential to keep them rolling as long as possible. In this video I will walk you though the process of replacing a freehub body on a Shimano Mountain bike hub. This should be the same process for most old cassette hubs. I will be doing more bike repair videos over the next few months.
The Tools you will need:
Cassette lock ring tool.
chain whip.
15mm cone wrench.
17mm combination wrench
10mm allen wrench.
vice and soft blocks.
cleaning rags
@zozocreek8327 Жыл бұрын
Awesome watching the wizard at work. 🧙🏾♀️
@BMXPete Жыл бұрын
It’s a magical job!
@markymarkpowpow Жыл бұрын
excellent video and instruction was very well explained! thank you!
@BMXPete Жыл бұрын
Thank you, I really appreciate the feedback!
@hanhtar9062 4 ай бұрын
Thanks mate!
@BMXPete 4 ай бұрын
You’re welcome!
@UniMyra 8 ай бұрын
Got it done. Thank you 😀
@BMXPete 8 ай бұрын
Awesome!! Glad I could help!
@lukasrglukasrg29 2 ай бұрын
Hi,I know it`s one year old movie,but can the loose bearings in this hub model be replaced with cartridge bearings?
@BMXPete 2 ай бұрын
No, you cannot install cartridge bearings in this hub.
@toddburdette Жыл бұрын
Thanks for EDUCATION 👍AlWays AweSome Vid,
@BMXPete Жыл бұрын
You are most welcome!!! Thanks for watching!
@PaulWhitcomb-ty6md 6 ай бұрын
My M525 rear has 3-piece seal rings on each side; a retainer ring, a rubber ring and center, metal ring. Can you tell me where these fit? My wheel is binding when I tighten it. I am working from the drive-side. That is an error, I know.
@BMXPete 6 ай бұрын
The metal ring should fit around the grove on the free hub body with no interference. If you’re not using cone wrenches to lock out the bearing adjustment it won’t hold tightly. It’s almost impossible to do this if the cassette is mounted to the wheel.
@JacekRapacz Жыл бұрын
Thanks for the video. Does the M525A freehub body fit the M525 hub? I have an M525 hub and the drum fell apart. Only M525A are available but I don't know if they fit.
@BMXPete Жыл бұрын
Yes, the M525A is the correct freehub body. The full Shimano part number is: FH-M525-A
@camillozalum251 10 ай бұрын
@@BMXPete today I changed the freewheel body and the 525 A is perfectly compatible with the 525 hub!
@BMXPete 10 ай бұрын
@@camillozalum251 awesome, glad I could help
@Triplex5014 Жыл бұрын
In the video you say 10mm allen socket and in the description it says 11mm allen wrench. Is it 10 or 11?
@BMXPete Жыл бұрын
Good catch on the typo. Sorry it took so long to respond, but I needed to verify which size it was. It is a 10mm Allen key. I will be updating the description now!
@cmcmillan22 9 ай бұрын
Hey Man this video was widly helpful, do you have a source on new freehubs for these hubs? can't seem to find one? has Shimano changed the part number on them?
@BMXPete 9 ай бұрын
I believe the free hubs have been changed to M525-A. I hope this helps
@_fitbeats Жыл бұрын
Which is more good m525 or m525A
@BMXPete Жыл бұрын
They are essentially the same thing.
@ender4903 Жыл бұрын
How does a bad hub manifests itself?
@BMXPete Жыл бұрын
The main issue you will have is the bike will not pedal forward. The crank will spin the chain, but not the wheel. Or if you coasting the bike and chain keeps going slack or rotating and pushing the pedals around.
@ender4903 Жыл бұрын
@@BMXPete My rear wheel is wobbling and making a constant ticking noise when rotating. I thought it was the hub.
@marlonfelipe0624 Жыл бұрын
Is it possible to convert it xd or microspline? Thanks
@BMXPete Жыл бұрын
No, not on these old ones.
@marlonfelipe0624 Жыл бұрын
@@BMXPete thanks
@Virtue_Signaling_Land_Whale 9 ай бұрын
Any idea if a microspline freehub can be installed into these? Have the FH-M525A on my bike, and just got a 12 speed deore. Now not too sure if i need a whole new hub and rebuild the wheel, or just get a microspline freehub.
@BMXPete 9 ай бұрын
Unfortunately, due the age of this hub. It is not possible to put a microspline free hub body. You can buy some 12 speed hg cassettes that will work.
@Virtue_Signaling_Land_Whale 9 ай бұрын
@@BMXPete Already got the CS-M6100 Deore cassette, deore FCMT512-1 cranks and deore RD-M6100SGS derailleur. Any idea the kind of hub i'd need?
@ahahahahahaahahaa Жыл бұрын
What size bearings were those?
@BMXPete Жыл бұрын
They are 1/4” ball bearings. The lower the number in the grade of bearing is a higher quality.
@kendallwalter4877 Жыл бұрын
𝙥𝙧𝙤𝙢𝙤𝙨𝙢 😆
@BMXPete Жыл бұрын
🤘🏽
SickBiker
Рет қаралды 266 М.
Pinkbike
Рет қаралды 253 М.
Sergio Outdoors
Рет қаралды 53 МЛН
Velopulse сервіс Чернігів
Рет қаралды 2,5 М.
Berm Peak Express
Рет қаралды 745 М.
Ribble Valley Cyclist
Рет қаралды 30 М.