boardnamics adjustable baseplate review | LDP 可調式輪架底板開箱測試

Рет қаралды 2,607

Күн бұрын

00:00 Introduction 開場
02:24 Ride height 輪架高度
03:00 Test on top mount 板面測試
04:22 Test on Pantheon Trip 板面測試
06:11 Test on Gbomb Brackets 測試
09:25 Conclusion 結論

Пікірлер: 36

@davidbolduc828 2 жыл бұрын

Thank you for the very comprehensive review of the BD adjustable basement showing the pros and cons as well as comparing it to the Exile truck. Keep up the great skate related videos.

@joemcguts1962 Жыл бұрын

very good review for a very niche product, some people will find this really useful!

@eBoard3R 2 жыл бұрын

🤙🏼 *Awesome* 🤙🏼 Great info!

@luvinfunvan 2 жыл бұрын

Nice review dude!

@makaveli7dayztheory638 2 жыл бұрын

Great video

@MrAboolayu 2 жыл бұрын

Thanks you. tried, great product.

@ldptaiwan 2 жыл бұрын

did you try with a Paris hanger? my friend told me caliber hanger fits better but it's too wide. boardnamics just restock their 145mm hanger, it should be a perfect fit.

@bbaker6212 2 ай бұрын

@@ldptaiwan there was a problem with the Paris hanger? It looks like it worked fine. Btw, what yellow bushings are those? Riptide APS barrel 90a?

@bushinforthepushin Жыл бұрын

It's too bad those threads go down so far on that kingpin. good call on using epoxy to fill the threads. I never thought of that.

@walter8758 10 ай бұрын

Tks for the detail review. Is there an increase in speed generation or ease of pumping when you reversed the boardnamics truck at the rear when it is set at 0 deg or 15 deg?

@GermanBadGuy 2 ай бұрын

I'm wondering what could be an affordable upgrade for g-bomb DD brackets and a tracker rt-s if it's all about surfier pumps. What would come to mind for you?

@squidsh0rts Жыл бұрын

Cool. Love this. Thinking about getting one. I thought it might be good for my downhill setup too. The concern there would be slop between baseplate and the pivot. Is there any slop there?

@ldptaiwan Жыл бұрын

It’s pretty tight, I’m happy with the build quality

@jacobbirk1166 2 жыл бұрын

Would it not work then to set it at 0, inverted on a gbomb SDF fork, for a 15 degree total rear end? Any chance of using asymmetrical risers on the SDF to fine-tune the angle, or would that angle-adjustment bolt get in the way?

@ldptaiwan 2 жыл бұрын

If you want to fine-tune the angle, i think DDR is you best shot

@mathieubelanger3825 Жыл бұрын

Thanks, this is great! Since the Bennett has its flaws, what about this as a budget front truck for LDP at 60* (which could work without wedging)? And in that regard, was there any play between the parts?

@ldptaiwan Жыл бұрын

It’s too high at 60 degree. Randal, Paris, bear with some wedging will be better for a budget front

@mathieubelanger3825 Жыл бұрын

@@ldptaiwan Really? That's disappointing. Still a very intersting option for the back. Did you end up trying out 15* without any extra part? That's my plan.

@himsayhimdo 2 жыл бұрын

Hi, I have a Trip with Paris v3. So can I just buy this baseplate to improve the pumping? Any other parts needed? New to LDP and your content is so valuable. Thank you!

@ldptaiwan 2 жыл бұрын

Yes you can do that but I don't know how that fork nose (tail?) will hold up, but I know someone had a similar setup before.

@alexanderwitzlau2713 2 жыл бұрын

Thank you for this. How come you wear a Schalke 04 jersey?

@ldptaiwan 2 жыл бұрын

Schalker since 2017!

@onlineklaus Жыл бұрын

Have you tried 15 degree on the Pantheon trip too and would that work? Great informative work thumbs up! :-)

@ldptaiwan Жыл бұрын

it won't work, massive wheel bite

@makaveli7dayztheory638 2 жыл бұрын

Bennet can be used with this baseplate?

@ldptaiwan 2 жыл бұрын

No, this is only for RKP hanger

@yuzh3226 2 жыл бұрын

请问这个在哪里购买呢？

@ldptaiwan 2 жыл бұрын

boardnamics.com

@bbaker6212 10 ай бұрын

why would you replace a Grade-8 bolt with an AN6 kingpin, the Grade-8 is stronger! In fact you say later in the video nobody has broken them, right?

@ldptaiwan 10 ай бұрын

It came with an AN6, I didn’t replace it

@bbaker6212 2 ай бұрын

@@ldptaiwan you said in the video the kingpin is "grade 8 with long threads". Grade-8 has better shear strength than an aircraft bolt. Good video about this baseplate :)

@mathieubelanger3825 Жыл бұрын

Why are Randal shitty trucks for the back, apart from the fact that they're somewhat basic?

@ldptaiwan Жыл бұрын

Their built quality is just poor

@kostyafedot551 Жыл бұрын

Well, FB Group for LDP is full of broken KP reports. So, this product might be OK for light riders, but I'm on the opposite site. So this one is not the product I would pay for.

@ldptaiwan Жыл бұрын

Broken kingpins were mostly from front truck with spherical in the hanger

@kostyafedot551 Жыл бұрын

@@ldptaiwan After your video with Bennett blind test, it is spherical or nothing for me! :)