boat restoration prep work Sandblasting England

Рет қаралды 100,674

27 күн бұрын

In this video, I Show how to prepare a narrow boat ready for repainting removing old paint, rust, and slim leaving the surface ready to take new coatings!
Ready to give your boat a fresh new look? Before diving into that repaint project, proper surface preparation is key, and sandblasting is the ultimate solution! Join me as I demonstrate the art of sandblasting for boat surface restoration. Say goodbye to stubborn layers of old paint, rust, and corrosion as I blast them away, leaving behind a clean canvas ready for a flawless repaint. Don't let your boat's surface condition weigh you down - embark on this transformative journey with me and watch as this vessel undergoes a stunning makeover. Get ready to set sail in style with a beautifully repainted boat that turns heads wherever it goes!

Пікірлер: 133

@peterfrazer1943 15 күн бұрын

After I came out of the Forces, I spent 35 years in Ship Repair Yards on the Tyne and have seen a lot of really big blasting jobs. Yet I still watched this vid to the end. There is something about blasting that is enjoyable to watch.👍👍

@Mobileblaster 15 күн бұрын

😂👌👍 it is therapeutic 😊

@AgiraKiran 9 күн бұрын

May the force be with you.

@suzukiyesteryear 12 күн бұрын

Good on you, son! Brave lad to actually be willing to work for a living and being a credit to your craft. God bless ya’…..

@Mobileblaster 12 күн бұрын

Thankyou 😊👌👍

@philelliott5327 25 күн бұрын

Nice job Mick. The boatyard should have cut those rubbing strakes off before you blasted it. Welded every couple of feet and only along the top is very old fashioned and a recipe for disaster, it harbours rust from day one and underneath them is probably the deepest pitting.

@Mobileblaster 24 күн бұрын

😊👌👍

@CharlesStevenage 25 күн бұрын

Great stuff! Nice to see how you hold the hose! Left hand takes the weight and right for the nozzle! Music is good as well chilled out and start was a bit of synthwave 😃😃😃😃❤️

@Mobileblaster 24 күн бұрын

😊👌👍

@ianlitchfield9273 23 күн бұрын

Nice job 👍 and love the backing music.

@Mobileblaster 23 күн бұрын

😊👌👍

@CarlosAlberto-ii1li 22 күн бұрын

There is nothing really to this job.............except that you are good at it.

@Mobileblaster 22 күн бұрын

😂 thankyou I will take that as a compliment as I can tell you its not as easy as it looks 👌👍 every skilled trades person that makes it look easy is a master of that craft 😊👍

@suzukiyesteryear 12 күн бұрын

Sorry but he is an independent contractor…you are overlooking maintenance on the compressors, maintaining material levels and a facility to bring the set up to the job…then comes the bloody paperwork, taxes, maintenance of the wife and family…much more than directing the blast media at the work surface…add to that he’s probably humping 60+ hours a week and not getting overtime pay….sorry to rant but this guy is a stud…

@pauldockins9635 19 күн бұрын

Good man, good equipment, great job. Thank you for sharing your work.

@Mobileblaster 18 күн бұрын

😊👌👍

@ViroRads 7 күн бұрын

Pretty relaxing to see you work

@Mobileblaster 6 күн бұрын

😊👌👍

@scottkenzig5144 25 күн бұрын

Great job Mick 👏 👍. She definitely needed a good clean up 👌

@Mobileblaster 24 күн бұрын

😊👌👍 Nice for the video hard to keep pushing it away from the fresh steel 😬

@tonymurray814 20 күн бұрын

Question. What about the underside?

@eby6114 20 күн бұрын

Great job. I wasn't crazy bout the music...till i found the volume button lol. Good to see the positive air feed. I hope it had a cooling affect for you. Cheers Thanks for the video

@Mobileblaster 20 күн бұрын

I'm open to change the music so long as it's copyright free and free to use point me in the right direction we can make good things happen 😊 yeah I have air into the helmet compressed air is bad air so it's filtered but it's still only grade D air breathable but not good but I suppose its better than breathing the dust 😂 although it's none carcinogenic I still wouldn't want to breath it 👌👍

@lumgs2009 7 күн бұрын

Oh man is that satisfying

@reetpateet8656 7 күн бұрын

I would so enjoy doing that!

@Mobileblaster 6 күн бұрын

😊👌👍

@PrincessNicEssus 4 күн бұрын

Would love doing this job, I’m so jealous!

@Mobileblaster 3 күн бұрын

It looks a lot better than it is 😏 you get covered in crap all day every day wrestling with a pipe that the kickback is like holding 15/20kgs all day and to top it off the noise is well loud noise haha

@PrincessNicEssus 3 күн бұрын

@@Mobileblaster Shhh! You're supposed to gloat and brag about what an amazing job you have and how it's far superior to mine. Don't you know how comment sections work? 😂 Seriously though, thanks for sharing!

@Mobileblaster 3 күн бұрын

@@PrincessNicEssus 😂

@andrzejporeda7281 25 күн бұрын

Super jest to zrobione i odrestaurowane pozdrawiam serdecznie 👍👍👍👍👍

@Mobileblaster 24 күн бұрын

😊👌👍

@jeanettecoleman-mz7ie 2 күн бұрын

Has to be painted before call it restored.

@Mobileblaster 2 күн бұрын

@jeanettecoleman-mz7ie that's why I titled it prep work 👍

@KASIH3103 23 күн бұрын

I forgot if I mentioned in my previous comments, sorry if it's repetitive. Would it be possible to do a before and after quick shot on some of these gnarly projects. I really would have enjoyed one for this project.

@Mobileblaster 23 күн бұрын

👍

@davidbrown-55 3 күн бұрын

I think we’re gonna need a bigger wand! Boom

@Mobileblaster 3 күн бұрын

@@davidbrown-55 😏

@cyberhornthedragon 25 күн бұрын

oooh shes got the bubblin rust goin on but shes lookin far far better after you got done

@Mobileblaster 24 күн бұрын

😊👌👍

@michaelhomer5155 25 күн бұрын

Think it would be good if you record the complete process from cleaning to final paint

@Mobileblaster 24 күн бұрын

Paint isn't my job and I'm not around when it gets done if youtube paid enough for me to have time off work I would definitely be around to film it all but unfortunately it don't work like that 😊👌👍

@ROOSTERpaintApplications 25 күн бұрын

Another one in the books!👍. What abrasive do you use btw

@Mobileblaster 25 күн бұрын

This was a mix of glass and iron silicate 👍

@swampy1584 15 күн бұрын

I've done that on my dads narrowboat but we used a grinder and steel wheels. I wish I had your number back then 😅

@Mobileblaster 15 күн бұрын

😂

@kevinlucas8437 3 күн бұрын

Something about taking crud off the surface of stuff to make it look new again 😊

@Mobileblaster 3 күн бұрын

😊👌👍

@ryancormier3504 25 күн бұрын

Shes had a rough life hope they give that boat a high quality paint job!

@Mobileblaster 24 күн бұрын

😊👌👍

@chevy2kss 20 күн бұрын

What do the bottoms of those boats look like if thats how the sides look?

@Mobileblaster 20 күн бұрын

Every one I've blasted in the past always seam to be in alot better shape its the water line that's bobbing in and out of the water that's always the worse bit 👍

@johngraves2755 25 күн бұрын

Might be a silly question but here goes.... Often seen, what I can only describe, as "sparks" flying off with the paint and crud as you are blasting. Are they sparks or just debris glinting in the light?

@Mobileblaster 24 күн бұрын

Yeah they will be sparks it causes a lot of friction they are classified as cold sparks and won't course a flame 👍

@NormandDesbiens-xw5oj 18 күн бұрын

Yeah, I would introduce high pressure water in with your sandblasting. Keep the dust down, okay, it gets wet, but no dust. Think about it

@Mobileblaster 17 күн бұрын

It's not no dust it's dustless... but the chemical needed to stop it rusting cost makes the job out of reach it almost dubbles the cost hence doing it like this 👍

@guylewis4770 18 күн бұрын

Makes a change to have plenty of room around the boat. 👍

@Mobileblaster 18 күн бұрын

😊👌👍

@jackofall2305 23 күн бұрын

Odd question but do you see this trade changing much in the future? Like moving to lasers etc

@Mobileblaster 23 күн бұрын

Yes but not yet as the technology isn't ready its likely to be a long time away as the price of the units are way too much for something that don't do half as much as a blast pot 👍

@davekent2088 5 күн бұрын

ok so the sides have been done, how about the bottom? especially where the current wood supports are located?

@Mobileblaster 5 күн бұрын

@davekent2088 the base isn't as popular as the steel is thicker and its not bobbing in and out of the water that's were the rust happens the most

@tammywehner3269 15 күн бұрын

as a fng to blasting, what is the grit that you normally use? big grit for heavy pitting I guess???

@Mobileblaster 15 күн бұрын

Very similar principle to sanding with sandpaper 👍

@Ksilva2 10 күн бұрын

Hey thanks for the video I just have a one small question on this What if you do all the standing and Restoration of the surface and then apply the marine paint and next do a nice polish finally how about applying ceramic coating? Just curious to know what your thoughts are Thanks buddy have a great day🎉

@Mobileblaster 9 күн бұрын

It would be very costly doing that I would have thought. Plus the canal is worse than parking a car in a shopping trolley park 😂 it needs to be thick and hard paint I would think well waxed would help keep it clean for as long as possible

@Ksilva2 9 күн бұрын

@@Mobileblaster hey thanks nice to hear from you from somewhere in the world I can understand your concern 🌎 Cheers

@joeroad6618 25 күн бұрын

I've always wondered. do they clean up the media/rust/epoxy mess on the ground before letting the water back into the drydock? I would imagine there is some sort of environmental regulations that dictate this, especially in the UK where they seem to regulate the crap out of everything.

@garryburton-bz2nc 25 күн бұрын

No clean up in most dry docks that i have seen in my 20 years on a boat. Mustn't say that nobody bothers tho.

@Mobileblaster 24 күн бұрын

Yes it's all part of the process I have a deal with the dry Dock owner I only do the blasting they take care of docking cleaning and painting/ re floating 👌👍

@Mobileblaster 24 күн бұрын

I leave my empty media sacks they fill them and dispose appropriately 👍

@chriseccles1454 25 күн бұрын

🎉🎉🎉🎉🎉😊

@Mobileblaster 24 күн бұрын

😊👌👍

@leaningr 20 күн бұрын

Should do a video follow up on the cleanup…

@Mobileblaster 20 күн бұрын

That's not my job on these 😬 I leave this to the boat yard 😊👌👍

@DEmma1972 25 күн бұрын

Not sure how old that boat is but totally needs new anodes lol. Maybe some pad welding on the pits. Absolutely shocking welding on the rubbing strakes. Full top and bottom or you asking for a lot of trouble down the line. Can already see its starting to go. Oh and additional: You did a lovely job.

@Mobileblaster 24 күн бұрын

Yeah the should be a standard to follow with the welding 😊👌👍

@lathamarea1437 12 күн бұрын

wouldn't a flare tip be a bit faster.?

@Mobileblaster 12 күн бұрын

No because you lose the hotspot yes it's wider spread but less concentration I need to know I've etched the steel not just removing the paint and crap 👌👍

@astonmatthews185 4 күн бұрын

Do they blast the bottom as well?

@Mobileblaster 3 күн бұрын

Not on this job but I've done them beforehand 👌👍

@Slash1066 21 күн бұрын

What happens to the pile of sand, rust and paint left over, there must be a huge amount of debris to dispose of?

@Mobileblaster 21 күн бұрын

That's part of the deal I've got with the boat yard business deals isn't part of my channel so I don't include this 👌👍

@Pileits 16 күн бұрын

Using a Laser does a much better job and cleaner as well

@Mobileblaster 15 күн бұрын

😂 OK show me the videos.... and I will explain why it wouldn't do this type of work

@jimsvideos7201 23 күн бұрын

I wonder how many itchy sunburnt folks watch this and envy the boat some 😅

@Mobileblaster 23 күн бұрын

😂

@carlj3515 24 күн бұрын

👍👍👍👍👍👍👍👍👏👏👏😁😁

@Mobileblaster 24 күн бұрын

😊👌👍

@tossevarius 25 күн бұрын

What abort the bottom of the boat? Best regards from Denmark

@Mobileblaster 24 күн бұрын

I wasn't asked to do that bit 😊👌👍

@htroberts 19 күн бұрын

do you do the bottom?

@Mobileblaster 18 күн бұрын

Yeah but not on this job sheet 👍

@ManhNguyen48119 15 күн бұрын

I wonder, how much sand to be used for this job ?. Kindly tell me . Thanks.

@Mobileblaster 14 күн бұрын

I didn't count unfortunately

@schlaznger8049 16 күн бұрын

I hope you had a good audio book to listen to.

@Mobileblaster 15 күн бұрын

😂👌👍

@petergarbutt9521 10 күн бұрын

CANNOT BELIEVE THE CUSTOMER PAYING FOR A SIDES ONLY SHOT BLAST ??... AS FOR NOT DOING THE BOTTON, AND REMOVING ALL THE OLD ANODE BRACKETS 17:00 AND RUBBING STRAKES, BEFORE SHOT BLASTING, I'M FLABBERGASTED, AS THOSE ARE THE AREAS WHERE THE CORROSION WILL BE THE WORST, UNDERNEATH THEM... COMPLETE WASTE OF MONEY JUST DOING THE SIDES... MUST BE HOPING THE BUYER DOESNT LOOK AT THE BOTTOM, AND THE OLD ANODE BRACKETS LEFT WELDED ON... YOU CAN ADVISE THE CUSTOMER, WHAT SHOULD BE DONE, BUT AS ALWAYS, GIVE THE CUSTOMERS WHAT, THE CUSTOMER WANTS... EXCELLENT VIDEO, STAY SAFE

@Mobileblaster 9 күн бұрын

Base plates aren't normally as bad as the sides they are made of thicker mettle and they arnt bobbing in and out of the water that's the bit that rusts up the fastest

@simonelt7317 10 күн бұрын

Any plans on switching to a laser system?

@Mobileblaster 9 күн бұрын

If only the technology was ready then maybe but as it stands they arnt ready to be in this kind of industry 👍

@simonelt7317 9 күн бұрын

@@Mobileblaster Oh are they not strong enough for this application?

@madmick6805 24 күн бұрын

Great job, but that lower D bar only been stitched along its length, very bad practice! One good way to trap water then rot and rust sets in!

@Mobileblaster 24 күн бұрын

😊👌👍 I've seen that before should be like you say fully welded stop the water getting behind it problem solved 👌

@SILVER19451945 10 күн бұрын

使った砂はどうやって処分するの？

@Mobileblaster 9 күн бұрын

You leave it to the professionals 👍

@glennsoucy9767 25 күн бұрын

On average, how old are these narrowboats?

@Mobileblaster 24 күн бұрын

They can be anything from 2 to 50 year old I don't think I've blasted anything older than 50 year but to be honest I don't ask anymore 😂

@garyteeters-ok3hc 10 күн бұрын

Water bla as ting is much easier and better

@Mobileblaster 9 күн бұрын

Better? You cannot paint over wet or rusty steel

@A.S.8.9. 7 күн бұрын

How you blast looks nice for the video but not very efficent 😉 hope you know that😝

@Mobileblaster 7 күн бұрын

🤔 what you mean can you see how I can improve? Please explain

@A.S.8.9. 7 күн бұрын

@@Mobileblaster what I mean is that instead of going like this top to bottom or left-right stripes/lines that look satisfying it actually takes longer and uses more abrasive. You should constantly wave it with a short sweeping motion or like a small circle. Don’t know how to explain it better😊 this way you can tell sooner that the area is already clean and save a considerable amount of time and material, and depending on what is the goal - on top of better efficiency it’s easier to achieve an SA 2 1/2, which in my experience is most common requirement. I’m doing sandblasting and painting for close to a decade now, been learning from the best and experimented a lot 😊 thats my 2 cents, sorry if I bothered you 🙃

@garryburton-bz2nc 25 күн бұрын

Awful to see that the sacrificial rubbing band has only been welded every 2ft or so. probably means no welding to the bottom edge. i'm guessing that even with 2k blacking, it will be showing rust, within 12 months.

@johnrimmer5955 24 күн бұрын

Could you have applied a silicone bead to seal the rubbing band top and bottom ( just a thought)

@Mobileblaster 24 күн бұрын

I've seen that done before 👍

@Shogunwario 23 күн бұрын

Need a robot to do that what a nightmare job.

@Mobileblaster 23 күн бұрын

😄😂

@polloqpolloq 14 күн бұрын

....he missed a spot.....

@Mobileblaster 14 күн бұрын

You can have that for free...

@alexnadeev7661 23 күн бұрын

А как днище обрабатываете! Борта то понятно.

@Mobileblaster 23 күн бұрын

I didn't get asked to on this job but it would be as you would expect crawl under and blast 👍

@DavidStruveDesigns 6 күн бұрын

I expect you're the wrong person to ask about this since you do sand blasting not narrowboat restoration, but I often wonder if there's some rule about having to paint a narrowboat in an "old timey" fashion. I've never seen one done up to look like an actual modern boat. And most have older style interiors too.

@Mobileblaster 5 күн бұрын

Depends were your looking loads of people building new boats with fresh builds on the interior

@DavidStruveDesigns 5 күн бұрын

@@Mobileblaster I guess I just haven't looked hard enough online for videos from those kinds of boat owners then. I just always find boats that look nice, but don't exactly have what I'd call "upscale" exteriors or interiors.

@WombleUK 25 күн бұрын

Fuxk me MIck they spoiling you in that boat yard with all that space to work & it's actually dry LOL

@Mobileblaster 24 күн бұрын

😂👌👍

@allenharris2549 24 күн бұрын

Your entire theory is flawed. I saw the welds. They’re at most 12” apart, with several being closer. The you inserted the word “probably”. Bad math + assumptions = Uneducated guess.

@Mobileblaster 24 күн бұрын

Sorry what are you going on about?

@tonymurray814 20 күн бұрын

Yes. Please in English if you’re going to critisize!!

@johnscrimgeour4888 20 күн бұрын

As is poor spelling.