Boat's Difficult Generator Installation ... Safely!

Рет қаралды 7,079

8 ай бұрын

Safely installing this generator from Land to the bottom of this yacht! Renting heavy equipment and having the 4 guys work as a team! Lots of thinking and talking amongst them as they come up with a plan as they move from land to the back deck then a plan to get it in the hole to bring it to the bottom of the boat.
Watch as our team of experts meticulously assess, disassemble and restore the these boat/yacht projects. Join us in our journey to prove that with hard work, dedication and a little bit of magic, anything is possible. Don't forget the best compliment is to leave a comment and subscribe to our channel for more incredible boat projects!
Subscribe - / @willfixthat
Boat's Complicated Generator Installation ... Safely! • Boat's Difficult Gener...
Don't Let This Pump SINK Your Boat • Don't Let This Pump SI...
Finally Picking Up Our Center Consoles Engine • Finally ... Yamaha 200...
Boat is Sinking .... AGAIN!! What? • Boat is Sinking ...Wha...
Delivering Custom Made $350,000 Center Console • Delivering Custom Made...
Saved Boat Owner Thousands By Doing Restoration • Boat Owner Saved Thous...
**NEW VIDEOS UPLOADED EVERY SUNDAY!**
Send all inquires to MobileMarineKW@gmail.com
So thru the years many of our clients have asked us how we "manage the chaos" of Our Boat Repair Businesses! Our videos are made up of projects we are currently work on! You may also see food and drinks sprinkled in since we LOVE to eat! 😁
We look forward to hearing from YOU leave us a comment below!
Thanks for watching, share, like and subscribe 😁!
#boatrepair #generator #installation #yachtrepair

Пікірлер: 60

@WillFixThat 8 ай бұрын

How did we do on this big job? It was a bit challenging as we tried to maneuver all the ways to get this generator in the bottom of the boat! We think we did a pretty good job working through all the complications! How many of you have had this done? We are working on another generator install but we plan to take it apart and installing it while the yacht is down on the docks.

@davidfeeman6094 8 ай бұрын

During the generator lift, I appreciated no ego’s were flying around. Good job working as a team, and respecting everyone’s thought on how to accomplish the task!! Great video!!

@WillFixThat 8 ай бұрын

Yes we try not to have ego’s …. We work best with humble people that are extremely smart! 😮

@wallacejeffery5786 4 ай бұрын

You are a true professional, and mindful of cost!!! Thank you so much from Mobile, Al.

@WillFixThat 4 ай бұрын

It’s important because otherwise you have unhappy customers!

@DrEd-th2lu 8 ай бұрын

The generator is how it’s done. My diy marina has a fork truck that has extendable capability, making it very easy. Some boat manufacturers just don’t think that anything will ever need servicing. I change my shaft seals with an entirely new PYI/PSS every other bottom job. If I had to remove that motor every time I would sell…. 😀

@WillFixThat 8 ай бұрын

PYI/PSS is Matt’s favorite shaft seal! We sent that 72ft north because the whole deck or back end had to be cut off because it had all the salt water damage in the engine room. The 2 generators, 2 sea keepers all needed to be removed. Crazy how they build boats!

@terryargo 8 ай бұрын

Way to go with that challenge.

@WillFixThat 8 ай бұрын

Thanks Terry …. Our guys did an amazing job!

@YourMom-nf4gb 8 ай бұрын

I really enjoy the Channel. I grew up around the water and boats. I love seeing people wrench as I have NO skills. Keep up the good work! This is my first time chiming in as I have been watching for a long time. Thanks for sharing everything with us.

@WillFixThat 8 ай бұрын

Thanks for sharing…. Comment more often it helps us learn too 😆appreciate you!

@davidmccoy4406 8 ай бұрын

i would have used a forklift jib. that's a 5-ton forklift so maybe a six-foot jib would have worked out great.

@WillFixThat 8 ай бұрын

We have both but it didn’t have the maneuverability as the lull!

@roypoe1865 8 ай бұрын

The easiest way, since this isn't your first lift. Make a cross bar to fit the forks, then attach a chain fall to drop it down.

@WillFixThat 8 ай бұрын

It was all about the clearance. Was a tight fit!

@ThoughtfulWander 8 ай бұрын

Great episode! Stay safe and keep rolling! 👍👍

@WillFixThat 8 ай бұрын

👍 yup still rolling!

@drsadventures 2 ай бұрын

We used to do many high HP water pumps for the studio and chain falls are a must. They make mini ones and also forklift extensions but I'm sure it's not your pickle fork. I do like for safety is to have double C clamps on each side of the fork to control chain.........Nice to see you all worked together.........a rarity now days :)

@WillFixThat 2 ай бұрын

When we have big jobs it takes a team. Our guys work together a lot. Learning helping etc.

@HardWaterFlat 8 ай бұрын

Nice work....invest in fork lift extensions.

@WillFixThat 8 ай бұрын

Thanks we rarely do this type of job!

@user-gx4zt7ut5n 8 ай бұрын

Great job on the generator. The only thing I could add that may of helped is remove the fence from behind the forks on the lift. That would have given more over head clearance. Those are made to come off for just such occasion. That was surely a tight spot.

@WillFixThat 8 ай бұрын

Boats have lots of tight spots 🥴 thanks for sharing!

@RStout59 8 ай бұрын

Awesome! You need to hire an 800 gorilla and 2-3 oompa loompas. They would work for bananas and chocolate respectively.

@WillFixThat 8 ай бұрын

Bring your crew down we will sub contract you … sounds like FUN! 🤩

@robertcelebre7247 8 ай бұрын

And most important thing is you didn’t drop it and nobody got hurt it’s a win-win

@WillFixThat 8 ай бұрын

👍🙏🙏👍👍 that’s the most important part!

@paulkersey2179 8 ай бұрын

Very good job.

@WillFixThat 8 ай бұрын

Thanks Paul it was a process!

@fatcat-hc4pj 8 ай бұрын

Good job guys

@WillFixThat 8 ай бұрын

Thanks it was a project as you can see!

@jimley9700 8 ай бұрын

man !! thats a job !

@WillFixThat 8 ай бұрын

Yup …. But we did pretty good working it out! 😊

@rickhackworth5421 7 ай бұрын

I have installed a few by using a Lull like the one you rented, I also use a stinger and align the unit over the whole and let the chain fall let it down.

@WillFixThat 7 ай бұрын

Yes we’ve done the same thing!

@williamburley3495 2 ай бұрын

Could use a telescoping jib boom that goes on the forks of the truck. Hope that helps.

@WillFixThat 2 ай бұрын

Thanks for sharing William.

@wallacejeffery5786 4 ай бұрын

Recommend installing a trailer hitch ball on on fork tip to secure the chain

@WillFixThat 4 ай бұрын

Not a bad idea I will let Matt know.

@michaellabombard9507 8 ай бұрын

You guys should make up an extension for the Lull forks for jobs like that.

@WillFixThat 8 ай бұрын

Thanks we rarely do this type of job out of the water.

@markflynfloat6779 8 ай бұрын

Fork boom? Shaft seal replace after gen install? Ladders and tools out while gen in way?

@WillFixThat 8 ай бұрын

A boom didn’t maneuver enough! Yes we have to do the shaft seal and a few other things.

@wallacejeffery5786 4 ай бұрын

Total pros

@WillFixThat 4 ай бұрын

That’s our goal!

@Harrybollox 7 ай бұрын

Great video. How did you know the cockpit floor was strong enough to hold the genny for a while

@WillFixThat 7 ай бұрын

Good question! Prolly only weighed about 400 lbs.

@jimcathcart5116 7 ай бұрын

If you guys had used a 2x4 to push generator out as you lowered it it would slide past openings to get where you needed to go

@WillFixThat 7 ай бұрын

Yes possibly! 👍

@honeybunbandit1 8 ай бұрын

We did something like this at the marina I work at and we built a heavy duty gentry for sliding side to side but I know yall can't do that being a mobile marine repair

@WillFixThat 8 ай бұрын

Yes for sure 👍

@honeybunbandit1 8 ай бұрын

@WillFixThat but what I think would work for yall that is portable low profile jib Crain for forklifts and if yall know how to weld build a custom one

@lb7wade518 8 ай бұрын

Need a fork extension

@WillFixThat 8 ай бұрын

Yes we have one but not enough maneuverability.

@johnfkeating 2 ай бұрын

You guys rule. I would have come straight from stern middle after dropping it on the deck reset to stern. But wtf do I know. lol my Kohler 5e only weighs 200 pounds. Lol

@WillFixThat 2 ай бұрын

Definitely takes some maneuvering, communication and thought before hand! These guys did awesome as the video is rolling all live! ❤

@johnfkeating 2 ай бұрын

@@WillFixThat you guys work really well together!!!! Ice tea and iced coffee for everyone!!!! Lol

@WillFixThat 2 ай бұрын

@@johnfkeatinghaha 31 years of TRYING to work together 😂 …. Yes most of our guys love coffee!