Boho Inspired Earrings | Clay Earrings - DIY Polymer Clay Earrings

Рет қаралды 29,399

3 жыл бұрын

Hi guys, I'm really excited to share with you, my yet another favorite project. They are boho inspired earrings. I also added the customize stamp that I will be using for my own pacakeging when I start selling my creation.
I am planning to create pins and hairpins polymer clay next week. What design should I go for? 🤔🤔🤔
Tho I've got a lot of request to make sunflower hairpins and pins, but O'm planning to create multiple design.
I will update you guys soooon 🥰🥰🥰
If you're new to may page please don't forget to
Follow me on Instagram: @JMeicaDC
Like and Follow My FB page: JMeica DC
Subscribe my YT page: JMeica DC
I would also love to hear from you, leave a comment below 😊
_____________________________________
BG music Credit:
INTRO:
Ready for Summer by Roa / roa_music1031
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/al-ready-for-summer
Music promoted by Audio Library • Ready for Summer - Roa...
BG music:
Solace by Nomyn / nomyn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/SolaceNomyn
Music promoted by Audio Library • Solace - Nomyn (No Cop...
_____________________________________
#Jewelries #Jewelry #Charms #DIY #clayearrings #clayjewelry #claycharms #polymerclayearrings #polymerjewelry #polymerclaycreations #polymerclayartist #polymerclaycharm #polymerclayart #polymerclaytutorial #knottedclayearrings #polymerclaycharms #polymerearrings #polymereclay #handmade #knitted #knittedclay #knittedpolymerclay #knittedearrings #knot #knotearrings #boho #bohoclayearrings #bohoearrings #bohoinspired
#knotclayearrings #macrame

Пікірлер: 35

@dallaswalker750 3 жыл бұрын

Thank you for sharing your wonderful talent. Easy to understand. One of the best videos I have seen, I am just starting out with clay art.

@JMeicaDC 3 жыл бұрын

Hi Dallas, I'm really happy that I was able to help you in anyway. I promise to do better. Keep safe 💕💕💕

@eleanorcolvin3175 3 жыл бұрын

Soo cute, great stuff!

@JMeicaDC 3 жыл бұрын

Thank you 😊😊😊

@leahlinky798 3 жыл бұрын

wow!!

@JMeicaDC 3 жыл бұрын

Thank you 😊😊😊

@busymomcraft 3 жыл бұрын

Amazing designs

@JMeicaDC 3 жыл бұрын

Thank you 😊😊😊

@lilithmorgan4632 3 жыл бұрын

Amazing

@JMeicaDC 3 жыл бұрын

Thank you 🥰🥰🥰

@PriyaSingh-lt5me 3 жыл бұрын

Good work

@JMeicaDC 3 жыл бұрын

Thank you so much 😀

@billieeskew705 3 жыл бұрын

Love your work ! Would you please put the stuff you use in the description ? I'm just starting and that would help 😅 thank you . Like I said I LOVE YOUR WORK

@JMeicaDC 3 жыл бұрын

Hi Billie, thank you so much 🥰🥰🥰. I used clay extruder in this project. Here's the link of the store where I bought it ( shopee.ph/product/203074144/5146864717?smtt=0.25109970-1604814033.9 ). I also used a pasta maker to condition my clay. I used cutter blade refill as my cutter in this project. Which is cheaper compared to the actual cutter used in the polymer clay. I also use blank stud, double cylinder connecting rod, jump ring. And used 200,600 and 800 sanding paper to polish my earrings. I just polish it manually. Hope that is helpful

@rhysedavis 3 жыл бұрын

These are so cute, what brand of polymer clay would you suggest?

@JMeicaDC 3 жыл бұрын

Hi Rhyse, not sure if you heard of Xclay and Ailto brand but I used this two brand of clay in my project. The ailto is a bit crumbly if you havent kneed on it, but once you condition it. It is easier to work on it. Also thank you for the compliment. This means so much to me 🥰🥰🥰

@McKennaiscool123 3 жыл бұрын

What do you do with the back of the knot pieces? That’s always my biggest struggle how to tuck them

@JMeicaDC 3 жыл бұрын

Hi Mckenna, I usually cut the end of the clay located in the inner knot straight, and I cut the other end diagonally, to make it easier in wrapping it on the side of the knot. I also sand the back if it needed more polish. Hope that will help you. Thank you and have a nice day

@sandraperez271 Жыл бұрын

Que marca de arcilla usas? Cuál es mejor? Gracias

@chrisbehne405 2 жыл бұрын

How do you keep from getting fingernail markes on the clay?

@chrisbehne405 2 жыл бұрын

May I ask what is your work surface?

@deeptiaggarwal5241 3 жыл бұрын

Can u please show how do u glue the stud posts on these type of earrings..

@JMeicaDC 3 жыл бұрын

Hi Deepti, I have a similar video which I show how I glue the blank stud on my earrings. I hope that was able to help you, Here's the link: kzfaq.info/get/bejne/lduZg7l8qtOymqs.html

@kellytwinley6800 3 жыл бұрын

Hey there, I love your tutorials. I'm new like 2days new to polymer clay. I brought an extruder as thought this would be great to start making things. However I have conditioned my clay, it doesn't crack when I bend it, has a nice sheen to it etc. However when I squeeze it through the extruder the clay comes out real strange with little tears and stresses I wish I could send you a picture to truly show what I mean. I have googled and KZfaqd but nothing is coming up with why's or suggestions. Would you be able to help me at all ? Thank you x

@JMeicaDC 3 жыл бұрын

Hi kelly, when you load your clay on the extruder, make sure that they are knead and condition, then try to push it inside even more, just to squish out some of the air, that is usually the reason of the crack in clay. I would love to see what happens, you can message me the picture in insta, or tag me in a post and I'll see what I can help with.

@kellytwinley6800 3 жыл бұрын

@@JMeicaDC awh thank you sooo much. I will give it a go xx